WEIMA WLK 15 Vertical Hopper-fed Low Noise Grinder Specifications: 59" x 59" Weima WLK-15 E-Rotor Shredder, 150 HP AC Motor15" Diameter RotorFilm & Fiber Rotor90 RPM Rotor Speed(63) 50MM CuttersBolt-In Cutter Holders3" Screen90" In-Feed HeightNEW Control Panel460/3/6010" Air-Veyor DischargeNew In 2007, Refurbished In 2023.NEW CUTTERSNEW CUTTER HOLDERSNEW BED KNIVESNEW BED KNIVE HOLDERSNEW RAM GUIDES - SIDES, TOP, AND BOTTOMNEW SLIP LEDGEOVER $45,000 In New WEIMA OEM Parts Installed$25,000 Spent On New Control PanelApproximate Dimensions:Shredder: 132" L x 111" W x 90" HControl Panel: 38" L x 18" W x 60" HHydraulic: 44" L x 36" W x 42" HWILL REQUIRE WIDE LOAD TRUCK

WEIMA ZM-30 Quad Shaft 4-Shaft ShredderEquipped with: Model- ZM 30 S -- Unit was used to shred wire (6,000 – 8,000 lbs per hour) --20mm screen included 25 HP x 2 --480V- 3 phase --Cutting chamber is 19"; x 27"; Hopper is 33"; x 48"; --The ZM30S is a beefed up version of the ZM 30. Unit has the same size motors, shafts and cutters as the ZM 50 but with a shorter shaft length

WEIMA ZM-40 Quad Shaft 4-Shaft ShredderEquipped with: -- Dual drive motors - (2) 30 HP Drive motors. -- Hopper opening measures 51" x 55.1" (1,300 x 1,400 mm); cutting chamber opening of 30" x 27.6" (762 x 700 mm). -- Rotor length of 30" (762 mm); Rotor speed 25 RPM; cutting disc 11" (280 mm) diameter. -- Complete with: -- Control Panel with soft start and 16' cable bundle. -- Note: "Quad Shaft" Shredders, unlike Dual Shaft Shredders, allow shredded material to be circulated through the cutting chamber until it is small enough to pass through the sizing screen. -- Machine weight: 5,500 Lbs.

WEIMA TH 514 Briquette Press (Cylindrical). Produces 2" (50 mm) dia. x 4" (100 mm) long compacted logs. Specifications: -- Approx. 1.4 m³ vertical hopper, 12 HP (9 kW) motor; vertical hydraulic ram compacts the material in the extrusion chamber to produce uniform material, extrusion chamber is continually filled via rotary screw type auger. -- Approx. hourly output between 80 - 120 Lbs/Hr. ("quoted output is an average and can be influenced by density, material size, screen size, feeding form, and other factors"). Equipped with: -- Centralized control panel for easy operation, PLC Logic control & solid German engineering. Complete with: -- Auto on/off switch, auto length adjustment, & oil level sensor. Optional: -- Hydraulic oil heater, hydraulic oil cooler, transfer piping and customization to customer material handling.

WEIMA - WLB 400, ...Horizontal Low Speed Grinder Equipped with: -- 25 HP Rotor motor; rotor with (18) 4-way indexable, replaceable cutter knives. Features: -- Top infeed roller; 15-1/2" x 2-1/2" feed opening; Heavy-Duty Industrial Grade construction with stress relieved shell and frame; Heavy-Duty outboard roller bearings; separate electrical control panel. Complete with: -- 8" Dia. collection outlet;

WEIMA WLK 13 Vertical Hopper-fed Low Noise Grinder Specifications: -- Single shaft Shredder/Grinder, 51" x 47" hopper opening (straight sided), 2 cu. yds. cap.; 368 mm (14.5") rotor dia. x 51.2" rotor length; 60 HP motor and hydraulic ram. -- Equipped with: -- Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters; reduce friction, and dedicate more horsepower to grinding. -- (68) welded knife holders, recessed concave cutters with low clearance over the rotor to extend cutter life, protect the bolts, and reduce machine wear; drop out discharge, lift up door for easy purge cleaning when used in plastics application. -- Hydraulic serrated ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system, Hydraulic clutch enables motor to start with the hopper full. -- Features: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge). -- Recommended for plastic, paper or wood applications.

WEIMA WLK 4 Vertical Hopper-Fed, Low-Noise GrinderSpecifications: -- 31-1/2" x 39" Hopper opening at the top, 1.1 cu. yds. cap. Features: -- 30 HP rotor motor, Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counter knife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. Equipped with: -- (14) Replaceable back bolt-on cutter knives, welded knife holders standard, recessed concave cutters with low clearance over the 10" dia. rotor extends cutter life, protects the bolts, and reduces machine wear. -- 6" Dia. dust collection outlet (1,200 CFM required); 3/8" - 2" interchangeable screens to produce chips from 1/2" to 2" (Output depending on screen size, material density, and moisture content); -- Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, the lateral force on the ram is minimized by a unique "U-Joint" mounting system. Includes: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for an additional charge). Options: -- Flared hopper, log Spacer, 2nd row of knives, material discharge auger; programmable logic controls;

WEIMA Horizontal Beaver 300 Slow Speed, High Torque Waste Grinder w/Vibratory Conveyor. 25 HP (18.5 kW), 10" rotor diameter, 11.8" (300 mm) rotor length, (14) 40 x 40 mm indexable, concave cutters; 11.8" x 4" infeed opening. Equipped with: -- WRRL 300 12' Vibratory Conveyor (550 Lbs). -- The "Horizontal Beaver" receives the material from a vibratory conveyor system; from the conveyor, a feed roller system pinches and feeds the material into the rotor. -- Features: Patented "V-Rotor" design utilizes a V-groove rotor closely matched to grooves in the counter-knife; the V-Rotor produces uniform discharged material that is free of splinters and dedicates more horsepower to grinding. -- Includes integrated "plug-and-play" electrical control system with UL approved components; -- Extraction requirements: 1,900 CFM (28 MPS), 8" (200 mm) diameter for dust collection. Total Approx. weight of 2,430 Lbs.

WEIMA TIGER 400 Horizontal Slow Speed Single Shaft Wood Grinder w/Vibratory ConveyorSpecifications: -- 6" High (160 mm) x 15-11/16" (400 mm) wide max. infeed opening, 50 HP rotor motor, 14" dia. rotor grinds at 620 RPM (fixed rotor speed depending on application). -- Equipped with: -- Patented "V-ROTOR" design utilizes a v-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- Features: -- (22) Replaceable back bolt-on cutter knives (welded knife holders standard, bolt-ons per customer request), recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. -- Infeed roller with replaceable wear strips for ease of maintenance, feed speed is controlled by monitoring the amp draw of the rotor, preventing "braking" or excessive pressure on the rotor, the vibratory infeed conveyor (12'), is also tied into the feed roll to eliminate binding. -- 9.85" (250 mm) Dia. dust collection outlet (3,000 CFM required). -- Includes: -- Heavy Duty low-profile frame (15-3/4" passline height); integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge); up to 16' vibratory infeed conveyor available.

WEIMA ZM-40 Quad Shaft 4-Shaft ShredderEquipped with: -- Dual drive motors - (2) 30 HP Drive motors. -- Hopper opening measures 51" x 55.1" (1,300 x 1,400 mm); cutting chamber opening of 30" x 27.6" (762 x 700 mm). -- Rotor length of 30" (762 mm); Rotor speed 25 RPM; cutting disc 11" (280 mm) diameter. -- Complete with: -- Control Panel with soft start and 16' cable bundle. -- Note: "Quad Shaft" Shredders, unlike Dual Shaft Shredders, allow shredded material to be circulated through the cutting chamber until it is small enough to pass through the sizing screen. -- Machine weight: 5,500 Lbs.

WEIMA TH 814 Briquetter A volume reduction of 90% is possible through the briquetting of wood, paper, aluminum and biomass or synthetics, providing significant savings in labor, disposal and storage costs.Material is hand fed or by dust system into the hopper, where an agitator pulls it into the auger and pressing chamber. Specifications: -- Produces 80 mm (approx. 3.1") dia. compacted logs; approx. 2.4 cu. yd. (55.1 x 55.1 x 37") square vertical hopper, 18 HP motor. -- Hydraulic ram compacts the material in the extrusion chamber to produce uniform material, extrusion chamber is continually filled via rotary screw type auger. -- Volume reduction from chip/dust to block up to 10:1 ratio; approx. hourly output between 300 - 400 Lbs/Hr.Features: -- Auto on/off integrated into feeding hopper; automatic briquette length adjustment; conical-shaped agitator; dust connection at pressing unit.Options: -- Hydraulic cooling for 24-hour operation, heating for cold weather start-ups; plastic tubing discharge into Gaylord or carousel bagging system. .

WEINIG - Rondamat 934, ...Profile Knife GrinderSpecifications: -- 9-3/8" Max. arbor length, 4" - 9" tool dia. -- 6" - 8-7/8" Grinding wheel dia., grinding wheel speed inverter controlled with grinding wheel speeds 1,500 to 3,000 RPM; 1.1 kW (1.5 HP) Motor.Equipped with: -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with precision linear table bearings; setting gauges for axial constant; axial (side) clearance angle 0° - 20°. -- Onboard diamond wheel dressing, 13-Gallon Coolant tank with 1.2 HP Pump.Dimensions: 50" x 43" x 62" HWeight: 1,600 Lbs

WEINIG RONDAMAT 934 Profile Grinder: -- 9" Arbor length, 11-1/2" max. tool dia., 1.5 HP motor, tilting head assembly for back relief grinding, clearance angle on peripheral of tools 10° - 30° and to each side 0° - 20°. -- Variable feed speed 1,800 - 3,000 rpm via a vari-speed gearbox, on-board wheel dressing, 9" max. wheel dia.; 0.16 HP coolant pump with built-in coolant tank. -- Includes: Operators manual, clamping nut, and pull-off bolt, 1-1/2" arbor, and an extra set of grinding wheels and toolingWEINIG OCMS measuring stand -- With a working width of 300 mm. -- The allowable tool dimension of 3" to 11-3/4" head diameter. The measuring stand allows for electronic measuring and indicating of cutter head dimensions with electronic digital readouts; visually establishing the tool measurement, no setting errors, and no expensive CNC control. -- Magnifier screen viewer with 20:1 magnification; the cutterhead is placed in Powerlock tool post, all the operator does is view the scope and move the measuring carriage via precision dialing left to right. -- Measured values (radial) and (axial), tool dimensions both minimum and maximum are displayed. -- Includes: 1-1/2" arbor.

WEINIG RONDAMAT R960 Profile Grinder. Working Dimensions: -- 9-29/64" Maximum tool width; 3-15/16" Minimum to 11-13/16" Maximum cutting circle. -- Grinding Wheel: Diameter 5-29/32" min. to 8-7/8" max. grinding wheel bore - 60 mm. Onboard diamond wheel dressing tool. -- Drive: Variable Frequency Controlled Drive giving a spindle speed - 1,500 to 3000 RPM; 1.5 HP Motor. -- Template carrier: Utilizes a template stylus-copy system, whereby the tool head table copying-grinding is effortless (precision linear floating table movement feels smooth as if there is zero gravity).Resistance template cross support with setting gauges for axial constant system; axial (side) clearance angle 0° - 20°. Holder for fixed and revolving tracing pins; for easy follow of the template to grinding aggregate. -- Coolant: 13-Gallon coolant tank capacity with 1.2 HP coolant pump. Includes: -- 1-13/16" arbor

WEINIG - Rondamat 934, ...Profile Knife GrinderSpecifications: -- 9-3/8" Max. arbor length, 4" - 9" tool dia. -- 6" - 8-7/8" Grinding wheel dia., grinding wheel speed inverter controlled with grinding wheel speeds 1,500 to 3,000 RPM; 1.1 kW (1.5 HP) Motor.Equipped with & Features: -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with precision linear table bearings; setting gauges for axial constant; axial (side) clearance angle 0° - 20°. -- Onboard diamond wheel dressing, 13-Gallon Coolant tank with 1.2 HP Pump.Dimensions: 50" x 43" x 62" HWeight: 1,600 Lbs

WEINIG U 1000 Feed Through Moulder --6-Head (B-R-L-T-T-B), working cap. of 9-1/16" x 4-3/4". --Specifications: -- Head sequence: Bottom 10 HP, right 15 HP, left 15 HP, top 25 HP, top 20HP and bottom 20 HP motor. All spindle motors with mechanical brakes. -- WEINIG Memory Redial system allows for storage of over (200) separate profiles; electronic LED readouts for all spindles, chipbreakers and pressure elements. -- Spindle dia. of 1-13/16"; spindle #1 at 6,000 RPM, spindles #2 - #5 at 8,000 RPM with high precision bearings; adjustment of vertical spindles 3-1/8" axially. --Feed: -- Motorized feed beam adjustment with independent adjustment of top head, cutting circles 8-7/8" on spindles #2 - #5. -- Variable feed speed from 20 - 118 FPM, 10 HP inverter controlled Cardan feed drive; overhead feed wheels with pneumatic pressure. -- Vertical spindles with adjustable table plates to cutting circles, hardened infeed bed plates before & after 1st bottom head. -- (1) Powered table rollers in bed at outfeed. -- Infeed straightening table 2 M (6'6") with adjustable fence and adjustable table at outfeed; chromed tables and fences. --Equipped with: Central location of lubrication points; Electromagnetic interlocking of safety hood, manual Waxilit pump. -- Complete with: Axial adjustment of feed roller opposite left spindle and (1) light inside sound enclosure; all setup tools, manuals and spacers.

WEINIG Unimat 300 Feed Through MoulderSpecifications: -- Currently a 4-Head Moulder (B-R-L-T), working cap. 9-1/16" x 4-11/16". -- Spindle sequence: Bottom 10 HP motor, right/left 10 HP, and top 15 HP. All spindles with mechanical brakes. -- Spindles 1-1/2" dia. with cutter-head speed of 6,000 RPM.. Mechanical digital readouts. "DigiSet" counters at left and top spindles for accurate setup. Mechanical digital readouts for chip breaker and pressure element at top spindle.Feed System: -- Dual feed speed of 26 and 40 FPM, powered by a 1 HP motor; Carden feed drive (chainless feed system); hardened bed insert in front of 1st bottom head. -- Receding chip breaker & pressure element at top spindle. Side pressure opposite right spindle, spring loaded with (2) rollers; driven outfeed roller in bed. -- Infeed straightening table 2 meter (6'6"), side pressure roller mounted to infeed table.Equipped with: -- Full sound enclosure with mechanical interlock, Central lubrication system, and manual table lubrication pump. Pneumatic switch to raise and lower the first feed pendulum.

WEINIG PROFIMAT 23 Feed Through Moulder5-Head (B-R-L-T-B) Moulder with working cap. 9-1/16" x 4-11/16". -- Spindle sequence: Bottom 10 HP, right & left by 10 HP motor, top 15 HP, bottom 10 HP motor. -- Spindle diameter 1-1/2" with cutterhead speed of 6,000 RPM. All spindles equipped with mechanical digital readouts. Digi-set readouts on left and top spindles. Chipbreaker and pressure for left and top spindles with digital readouts. -- Feed: 4 HP Carden feed drive (chainless feed system), variable feed speed 18 - 78 FPM; (1) driven outfeed roller in bed. -- Equipped with: Infeed straightening table: 2 M (6-1/2') central lubrication system, central lubrication and full sound and safety enclosure. -- Extras: Includes manuals, used cutter-heads, many sets of assorted Knifes, and dust collection manifold. -- Machine is set up for 460V and it comes with a 230 V to 460 V step-up transformer -- Low hours, used for production of cabinet door rail and stiles components.

6-Head (B-R-L-T-B-U); working cap. 9-1/16" x 4-3/4". -- Head sequence: Bottom 10 HP, right 15 HP, left 15 HP, top 25 HP, bottom 20 HP and universal 10 HP motor - all motors with electronic brakes. -- WEINIG Touch-Screen "Power Com" software system features: Profile drawing storage, profile dimensions, tool changes, and production optimization. -- Electronic LED readouts for all tool holder settings, including chip-breakers & pressure elements.Spindle configuration -- Spindle #1: 1-13/16" With cutter-head speed of 8,000 RPM; Power-Lock tool holders: #2 - #5 With cutter-head speed of 12,000 RPM and tool holder #6: variable speed 4,000 - 12,000 RPM. Adjustment of vertical tools 2-3/16" axially. -- Motorized tool positioning radial & axial on tool holders #2 - #5; motorized feed beam adjustment with independent adjustment of top head; top head with independent adjustment of chip-breaker & pressure element. -- Variable feed speed from 20 - 120 FPM, 10 HP inverter controlled Cardan feed drive, overhead feed wheels with pneumatic pressure. -- Vertical tools with: Adjustable table plates to cutting circles, hardened infeed bed plates before & after 1st bottom head. Equipped with: -- Chromed tables & fences, (2) powered table rollers in bed, (1) between bottom and universal spindles, and (1) at outfeed. -- Infeed straightening table 2 M (6-1/2'). -- Central location of lubrication points, electromagnetic interlocking of safety hood, manual table lubrication pump, and (2) lights inside reinforced sound enclosure and phone modem.

WEINIG Powermat 1000 7-Head Feed Trough Moulder(B-R-L-T-T- B-U); working cap. 9-1/16" x 4-3/4". Head sequence: -- Bottom 15 HP, Right 15 HP, Left 15 HP, Top 30 HP, Top 40 HP , Bottom 30 HP, and Universal 15 HP motor. All motors with electronic brakes. WEINIG Touch-Screen "Power Com" -- PowerCom Plus software system features: Profile drawing storage, profile dimensions, tool changes and production optimization. -- Electronic LED readouts for all tool holder settings, including chip breakers & pressure elements.Spindle arrangement: -- Spindle #1: 1-13/16" w/Cutterhead speed of 8,000 RPM; -- PowerLock tool holders on #2 - #5 with 12,000 RPM, universal tool holder variable from 4,000 to 12,000 RPM and with high precision bearings; -- Adjustment of vertical tools 2-3/16" axially. -- Motorized tool positioning; radial & axial on tool holders #2 - #5; motorized feed beam adjustment with independent adjustment top head; top head with independent adjustment of chip breaker & pressure element. -- Universal spindle with 270° of movement.Feed System: -- Variable feed speed from 20 - 118 FPM, 7.5 HP inverter-controlled Cardan feed drive, overhead feed wheels with pneumatic pressure. -- Vertical tools with adjustable table plates to cutting circles, hardened infeed bed plates before & after 1st bottom head. -- Chromed tables and fences, (2) powered table rollers in bed and (1) between left and top spindles and (1) at outfeed. -- Infeed straightening table 2 M (6-1/2').Equipped with: -- Pedestal for machine controls separate from the electrical cabinet, central location of lubrication points. -- The safety hood, automatic table lubrication pump, and (2) lights inside the reinforced sound enclosure are electromagnetically interlocked, as is the phone modem..