MAREN 72OE-76 Auto-Tie Horizontal Baler -- Motor: 30 HP. -- Cylinder: 6". -- Feed Opening: 29" x 27". -- Oil Cooler. -- PLC: "Micrologix 1200". -- Includes: Spare Parts, New Cylinder and Manifold. -- Loaded onto your Truck.

(5) MARAEN - 203, ...Automatic Tie Horizontal BalersLot of (5) Balers -- Model: 203-325-102 (40 HP) -- Model: 203-325-102 (40HP) -- Model: 203-325-102 (40 HP) -- Model: 203-103 (60 HP) -- Model: 203-103 (75 HP) -- Cylinder: 8" -- Bale size: 30" x 36" (variable) -- Loaded onto your truck

MAREN - 72-OE-76, ...Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 6" -- Bale size: 30" x 38" x Variable -- Feed opening: 29" x 27" -- Power unit: 30 HP -- Tensioner cylinder: 3" x 12" -- Ram thrust: 78; 340 Lbs -- Cycle time: 20 Sec -- Operating pressure: 2,700 PSI

MARCUS TRANSFORMER 15 KVA, 3-Ph, Auto, 600/480 V Transformer with tap for 440 V.15 KVA Auto-ventilated "dry type" transformer 600 V in (primary); 480 V out (secondary) with tap on secondary for 440V at full capacity. -- Manufactured with grain oriented silicon steel is used. -- Coil windings with high quality magnet wire and the enclosure is made of heavy gauge steel w/ventilation openings. -- UL and CSA approved.

--In auction: https://exfactoryauctions.com/Detail/SH-230492/event/A122024$1 --NO RESERVE!-- MARTIN T 23 Tilting Spindle Shaper, with 30 mm (1.18") Interchangeable Spindle & Power Feeder Specifications: Table size 940 x 1100 x 850 mm (37.01” x 43.31” x 33.46”) H, with Table insert dia. 90, 130, 205, 305, & 480 (3.54”, 5.12", 8.07”, 12.01”, & 18.90”). Spindle tilt 0° to 45°. Maximum capacity under nut 7". Vertical spindle adjustment 145 mm (5.71"). Spindle speeds 3000, 4,500, 6,000, & 90,000 RPM. Equipped with: 6.4/7.8 HP Motor. "MK5" Spindle shaft. Mechanical spindle brake, with Foot pedal. Hand spindle lock. Complete with: 11-1/2” x 4-3/4” Left & Right Fences, with 21” x 6” H Left & Right Wood fences. 1996 CO-MATIC 1 HP 4-Speed 4-Roll Power Feeder, with Speeds 13, 26, 26, & 72 FPM. Dimensions with Power Feeder: 42" x 42" x 63” H.

MARTIN T-71 Sliding Table SawSpecifications: -- 10' Cutting cap., 9.5' sliding table; 3-position table locking mechanism, cast iron machine table, 7.5 HP motor; tilting saw arbor (arbor speed 2,800 - 4,000 & 5,500 RPM) with tilting from 0° - 45.5°, 16" saw blade cap.; 1 HP - 9,400 RPM scoring motor. -- Max. cutting height 5-11/16", hydraulic saw blade height & tilt adjustment by foot pedal control; cutting width between saw blade and rip fence 49". -- Complete with: -- Rip fence with micro-adjust; crosscut fence flip stops.From seller: "It will hold its accuracy and precision as long as you care for it. It will cure all past trauma of inaccuracy from lesser saws. I used this saw to dimension all solid wood parts, cut out sheet goods, cut joinery in the plywood and cut solid wood joinery from furniture scale parts up to timber-framing parts. It will cut 3/4"; wide x 1 1/2"; deep dadoes in a single pass without even flinching."

MARUNAKA Model RD – 8J WIDE Single Deck Veneer Roll Dryer;Complete with the following features: -- 1988 - year of manufacture. --Working width – 51"; --Length of the dryer – 24 Ft (4 Sections) --Type of heating - Steam --Operational in 2018 when mill closed --Professional rigging and loading available.

MARUNAKA Model RD-3UB/RD-6UB (Connected) Single Deck Veneer Roll Dryer;Complete with the following features: -- (3) 3 HP circulating fans with (1) 3 HP exhaust blower thru the ceiling. -- Optional heat source: electric (7) Elements/Zones, computer controlled thermocouples in addition to (2) Natural gas burners (OEM).. Both dryers have a 100amp circuit breaker with 100amp fuses. The RD 8 operates with 4 fan motors and 4 heaters. The RD 6 has 3 fan motors and 3 heaters";.. -- Capable of temperatures to 120° Celsius (250° Fahrenheit). -- Working width 1000 mm or about 39 inches. Veneer is fed endo.Please Note: -- Dryer is (2) separate units; all equipment will fit into a 40' container for shipment from Eastern USA. -- All equipment is in good working condition including all fans and blower, temperature control works properly; feed roll drive works well. -- Rolls have been nickel treated to minimize corrosion/oxidation. -- This dryer equipment is still in place. -- MARUNAKA (2) Models: RD-3UB and RD-6UB currently connected to increase capacity. Can easily be separated.NOTE: Refurbished in 2005, operated from 2005 - 2012. Still operational ready to work!

MASTER MACHINERY MC-MDS-1 Single Spindle ShaperSpecifications: -- Table size: 27.5" x 32" -- Spindle speed: 7500 - 10,000 RPM -- Main motor: 3 HP

MASTERWOOD OMB1CN3-TF Horizontal Slot Mortiser. One NC working head (3) axis with programmable microprocessor.. Machines a sequence of slots on windows, doors, shutter, or cabinets without moving workpiece. Continuous cycles with loading/unloading. -- Equipped with: (1) Maka style chisel mortising unit, (1) Vertical routing unit and (1) TF Horizontal routing unit. High frequency drilling - routing with controlled axis, DC motors, ball screw driven. -- Max Mortise workpiece size 150x110x2800 mm length, (5.9"x4.3"x110.2"). Vertical and horizontal routers 142"; length. -- Max slot depth 130 mm (5.1"). Max vertical head stroke 140 mm (5.5"). -- Features: Pneumatic hold-downs bar mounted above table. Flip-up pneumatic pressure beam for additional support when needed. Free-standing control and electrical cabinets house computer monitor and keyboard. Master universal electronic system controller (MW CN10 Centromac) -- Vertical routing assembly: 4HP, 220/380v 3 PH, 9,000 RPM -- Horizontal routing assembly 5"; 220/380v, 3 PH, 9,000 RPM -- Memory for 50 cycles. Mirror imaging with preset tool speed (over-writeable knob). -- Total load 21 KVA -- Overall dimensions 4200mm long x1600x1600mm (166"x63x63"). Electrical cabinet 1,000 high x 450x950mm (40"x 18"x38"). Approx. weight 3800 Kg (8,400 Lbs.).

MASTERWOOD PROJECT 313 CNC MACHINING CENTER (W/ACT/BORING): -- Specifications:Working Capacity:"X" Axis 3,080 mm (121"), "Y" axis 1,100 mm (43") width; -- Positioning Speed:Programming speed in X-axis 197 FPM (60 MPM), Y-axis 162 FPM (49 MPM), Z-axis 58 FPM (18 MPM). -- Boring unit:(13) independent vertical spindles, (9) in X-axis, (5) in Y-axis; (4) horizontal spindles with (1 + 1) in X-axis for edge boring in the left- & right-hand panel edges. -- Machining:(1) 7.5 HP (5.6 kW) high speed router (1,000 - 24,000 RPM) by frequency inverter; 1.5 HP (1.1 kW), 6,000 RPM grooving saw with manual rotation for X-axis or Y-axis; -- Work Table: (6) moveable support rails with (2) vacuum cups ea., double zero settings, (6) pneumatic backstops and (2) pneumatic side stops creating (2) working zones. -- Operator & Machine Control:TECNOSUD "K68800" Microprocessor control for (3) axis, lineal, circular, and helical interpolation. Equipped with 14" color video graphic monitor, keyboard for data entry, 1.44 MB floppy disk drive, 64K RAM, RS-232 for possible connection to office PC, all mounted in separate free-standing control cabinet; features to run CPL/Parametric "TRIG" programming and "Spline" CAD/CAM. -- Complete with: Dual zone vacuum pump. Ontario Hydro approved electrics. -- Actual Model is MASTERWOOD PROJECT 313

MATH-EX (6) Position (Person) Basic Recycling Sort Line Specifications: -- 16 Feet x 32" Inclined feed conveyor with 48" high hopper and 2" high cleats @ 36" centers. -- 36 Feet x 32" Sort conveyor with infeed transition guides and Belly rest skirt one side. -- Sort platform with OSHA stair and handrail. -- (6) Sort chutes with 52" of clearance. -- 1-1/2 HP, 460 volt, 3-phase drives. -- (2) VFD Controllers mounted in control panel -- Pedestal style stand. -- Emergency pull cord stop or-E-stop for sort conveyor -- Motor wire and flex conduit for (2) conveyors shipped loose. -- (1) 6" Diameter Ceramic Drive Pulley -- (1) Stainless steel Back ChuteOptional Equipment: -- (2) VFD Controllers mounted in control panel -- Pedastal style stand -- Emergency pull cord stop or E-Stops for sort -- More wire and flex conduit for (2) conveyors

MATH-EX (6) PERSON BASIC RECYCLING SORT LINESpecifications: -- 16 Feet x 32" Inclined feed conveyor with 48" high hopper and 2" high cleats @ 36" centers. -- 36 Feet x 32" Sort conveyor with infeed transition guides and Belly rest skirt on one side. -- Sort platform with OSHA stair and handrail. -- (6) Sort chutes with 52" of clearance. -- 1-1/2 HP, 460 volts 3-phase drives.Custom order your Sorting Line with approx. 7 to 8 week lead time for delivery.

MATH-EX (6) PERSON BASIC RECYCLING SORT LINE -- 16 Feet x 32" Inclined feed conveyor with 48" high hopper and 2" high cleats @ 36" centers. -- 36 Feet x 32" Sort conveyor with infeed transition guides and Belly rest skirt one side. -- Sort platform with OSHA stair and handrail. -- (6) Sort chutes with 52" of clearance. -- 1-1/2 HP 460 volts 3 phases drives. -- (2) VFD Controllers mounted in control panel -- Pedestal style stand. -- Emergency pull cord stop or-E-stop for sort conveyor -- Motor wire and flex conduit for (2) conveyors shipped loose. -- BRAND NEW WITH WARRANTY -- ALLOWS 7 TO 8 WEEKS DELIVERY -- LOADED ON YOUR TRUCK

MATH-EX 4-Position (Person) Basic Recycling Sort Line Specifications: SLIDER BED BELT CONVEYOR: (MODEL 600, STYLE B) FRAME CONSTRUCTION: -- 10 GAUGE, BOLT TOGETHER PULLEY DIAMETER --6" DIAMETER CONVEYOR LENGTH -- 16' 0" ANGLE OF INCLINE: 25° --EFFECTIVE WIDTH: 32" BELT: --BLACK PVC120 COS ENDURA-CLEAT: 2" HIGH @ 48" CENTERS SIDE SKIRTS --12" HIGH (TOB), 12 GAUGE BELT RETURNS: BOTTOM PANS BELT SPEED: 60 FPM DRIVE MOUNT/SIDE: SHAFT MOUNT -- RIGHT HAND SIDE MOTOR: 1 HP, 460V/3PH LIVE LOAD CAPACITY: 394 LBS. (FIXED SPEED) CONTROLS: START/STOP CONTROL - (2) E-STOPS - --MOUNTED AND WIRED INFEED HEIGHT: 0" BOF DISCHARGE HEIGHT: 83" BOF SUPPORTS: -- PROVIDED INCLUDED FEATURES: - BLACK SIDE GUIDES - BOTTOM PANS - INFEED HOPPER - TRANSITION GUIDES --MAGNETIC HEAD PULLEY (CERAMIC) OVERALL FLOOR LENGTH: 174" (END TO END) -- APPROXIMATE SHIPPING WEIGHT: 1876 LBS. PLUS PACKAGING --FRAME CONSTRUCTION: 10 GAUGE, BOLT TOGETHER --PULLEY DIAMETER: 6" DIAMETER CONVEYOR LENGTH: 26' 0" ANGLE OF INCLINE: 0° EFFECTIVE WIDTH: 32" BELT: --BLACK PVC120 COS SIDE SKIRTS 6" HIGH (TOB)12 GAUGE BELT RETURNS --RETURN ROLLERS BELT SPEED: 60 FPM DRIVE MOUNT/SIDE: SHAFT MOUNT --RIGHT HAND SIDE MOTOR: 1 HP, 460V/3PH -- LIVE LOAD CAPACITY: 922 LBS. --(FIXED SPEED) CONTROLS --AC VFD CONTROL (2) E-STOPS --MOUNTED AND WIRED INFEED HEIGHT: 52" BOF DISCHARGE HEIGHT: 54" BOF SUPPORTS: --PROVIDED INCLUDED FEATURES: - BLACK SIDE GUIDES - SORT SKIRTS -- (4) SORT CHUTES OVERALL FLOOR LENGTH: 312" (END TO END) --APPROXIMATE SHIPPING WEIGHT: 2059 LBS. PLUS PACKAGING --4P SORT PLATFORM: LENGTH: 23' WIDTH: 42" HEIGHT: 26" ADDITIONAL FEATURES: - SAFETY RAILINGS

MATTEI BLADE 7 LX-TM-SE, 10 HP Tank-Mounted Rotary Vane Compressor w/Refrigerated Air Dryer ( 39 CFM @ 115 PSIG) RELIABLE ROTARY VANE AIRENDSBLADE features proprietary single-rotor stator unit (RSU) that incorporates MATTEI's legendary white metal Babbitt bushings on the back and now an oversized radial ball bearing on the front to address the side load created by the belts. MATTEI BLADE compressors are engineered for 24 hours/day service with exclusive Meehanite® iron blades, designed to last 100,000 hours.Features: -- MATTEI BLADE Series Air Compressors combine vane technology with dual "V" belt transmission to provide industry leading performance at affordable prices. -- As quiet as 61 dB(A), with speeds as low as 1,050 RPM, and operating pressures from 115 PSI to 175 PSI, BLADE is the ideal solution for small woodworking cabinet shops and manufacturers, body shops, mechanical shops, and other manufacturers.Equipped with: -- 10 HP TEFC motor, 39 CFM @ 115 PSIG; full-voltage motor starter, air-cooled Aftercooler, MAESTRO XB controller with Continuous and Automatic operating modes with standard load/unload operation on all models; MATTEI Rotor Oil 8000 F2 synthetic oil.Includes: -- 80-Gallon ASME Air Receiver Tank; Refrigerated Air Dryer, Pressure Gauge, Safety Valve, Filter, Oil Separator.

MATTEI BLADE 18 LX, 25 HP Direct-Drive Rotary Vane Compressor (112 CFM @ 116 PSIG)Direct-Drive Air Compressors combine legendary vane technology with traditional shaft-to-shaft coupling to provide industry leading performance at affordable prices. As quiet as 66 dB(A), all models turn at a slow 1,800 RPM. -- Equipped with: 25 HP Premium efficient TEFC motor; Wye-delta starter; quiet acoustic enclosure, 67 dB(A); air-cooled after cooler; protection system MaestroXS. -- Features: MAESTRO XB controller with expansion module allowing real time clock and daily/weekly programming, Continuous and Automatic operating modes with standard load/unload operation on all models, moisture separator & zero-loss electronic condensate drain (shipped loose); phase reversal protection; network ready. -- Includes: (3) Year parts warranty, (10) years on Air-End. Add Optional Refrigerated Air Dryer AC-300295

MATTEI OPTIMA 45, 60HP Variable-Speed Rotary Vane Compressor (102-145 CFM @ 102-145 PSIG)RELIABLE ROTARY VANE AIRENDSThe inverter adjusts the motor’s rotational speed, adapting the air delivered by the compressor to the actual air demand. OPTIMA can save up to 35% of the annual operating costs. Ideal for automotive, commercial and industrial applications.Features: -- MATTEI Optima Series Air Compressors quiet cabinet constant-duty Rotary Vane Compressors feature an inverter to match their operation to suit the load profile required by the compressed air system to ensure maximum energy savings under varying air demands.Equipped with: -- 60 HP TEFC motor, 102-145 CFM @ 102-145 PSIG; MaestroXS microprocessor control and protection system, AC inverter, premium efficient TEFC motors, quiet acoustic enclosure, air-cooled After Cooler. -- Intelligent timed electronic condensate drain and separator kit and are filled with Mattei Rotoroil 8000 F2 synthetic oil; 2" NPT outlet.

OPTI-SAND - R52V, ...Denibbing Brush SanderSpecifications: -- 1-Head, 52" max. width cap., 0" to 5" max. part thickness opening; designed to completely and thoroughly finish sand and sealer sand workpieces such as raised panel cabinet doors, entry doors, louvers, shutters, etc. -- Equipped with: (1) Carousel head with: (4) Rotating arbors mounted on a central rotating deck assembly; carousel deck rotation 4 to 24 RPM; (2) arbor/spindles are 12" x 41" long with 3 HP motor & (2) arbor/spindles are 12" x 35" long with 2 HP motor; 60 to 600 RPM spindle speed. -- Feed System with: Variable vacuum conveyor belt feed; variable feed speed 4 to 44 FPM; 2 HP feed through drive; 10 HP vacuum motor. -- Control Panel: Spindle speeds, head rotation speeds, and conveyor speeds are all inverter controlled with infinite knob adjustment and digital readouts; workpiece height is push button adjusted with digital readout.Single button reverses spindle direction allowing a change from whitewood to sealer sanding by having single-sided strips of different grit facing each direction. -- Cabinet: Heavily insulated cabinet for a quieter run; (1) front & (2) side viewing windows; (4) easy access doors; (4) dust collection outlets of 6" each.Note: Machine is missing cover as shown in photos and will also need a new feed belt; not included in the sale price.

ORIGINAL 3579-20L Metal Cutting Radial Arm Saw (Super Duty Series)The Super Duty Series is the ultimate workhorse of the industry, capable of operating 2 to 3 shifts per day. Miter & bevel cutting, compound miters and dado operations. Constructed of heavy duty cast and ductile iron for vibration free operation. Aluminum, Brass, Bronze, Copper, Fiberglass, Lead Sheets, Plastic, Steel. Specifications: -- 7.5 HP TEFC Saw motor; 20" dia. blade; 1" x 3-1/8" saw arbor; 7" thickness cap. @ 90°, 3-3/8" @ 45° bevel; 32" crosscut cap. with 1" stock; 21-5/8" max. miter cut @ 45°. -- Features: -- Swivel arm for miter cuts, swivel motor for bevel cuts; indexing yoke to 90° for rip cutting panels; saw head with automatic motor brake and manual chain feed assembly; positive locking device for tilting; upper and lower blade guards with anti-kickback attachment. -- Complete with: -- The Metal Cutting Series comes with the standard t-slot aluminum extruded top, allowing easy to attach aluminum fence, clamping systems, table surface options, as well as your own clamping jigs or cutting fixtures. These all come mounted to a extruded leveling frame for easy leveling of the entire table assembly throughout the life of the machine. -- Available Options: -- Power feed saw head; pneumatic clamping systems; Mist Coolant System (manual for non-ferrous cutting); blade.