WEIMA WLK-6 Vertical Hopper-Fed Low-Noise Waste GrinderEquipped with: -- 31-1/2" x 49" hopper opening at the top, 1.2 cu. yds. cap.; (3) sides straight with curved Front Wall. -- 30 HP rotor motor, 10" dia. Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counterknife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- 31-1/2" Long rotor operates at 80 - 120 RPM; equipped with (42) replaceable back bolt-on (4 x indexable) concave shaped cutter knives. -- Welded knife holders standard; recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. -- Features: -- WEIMA's proprietary gearbox designed specifically for slow speed grinders. -- 8" Dia. outlet for material discharge via auger, conveyor, or pneumatic (1,900 CFM required required for pneumatic conveying); choice of 3/8" - 2" interchangeable screens to produce chips from 1/2" to 2" (Output depending on screen size, material density, and moisture content). -- Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system. -- Complete with: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge). -- Material output from 1,000 - 1,250 Lbs/Hr (output is an average and can be influenced by density, material size, screen size, feeding form, and other); 1" standard screen hole size. -- Includes: -- A/B Programmable Logic Controller. -- Options: -- Flared hopper, material discharge auger.

WEIMA WLK 10 Vertical Hopper-Fed Low-Noise Grinder Equipped with: -- 39.4" x 47.2" Hopper opening at the top, 1.7 cu. yds. cap.; (3) sides straight with curved Front Wall. -- 60 HP rotor motor, 14-1/2" dia. The patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- 39.4" Long rotor operates at 60 - 120 RPM; equipped with (52) replaceable back bolt-on (4 x indexable) concave-shaped cutter knives. -- Welded knife holders standard; recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. Features: -- WEIMA'S proprietary gearbox is designed specifically for slow-speed grinders. -- 8" Dia. outlet for material discharge via auger, conveyor, or pneumatic (1,900 CFM required for pneumatic conveying); choice of 3/8" - 2" interchangeable screens to produce chips from 1/2" to 2" (Output depending on screen size, material density, and moisture content). -- Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system. Complete with: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL-approved components (system UL certification available upon request for an additional charge). -- Ground material output depends on screen hole size and material from 1,200-2,500 Lbs/Hr.; 3/4" holes are supplied standard screen hole size. Options: -- Flared hopper, material discharge auger; programmable logic controls, and ram comb.

WEIMA TIGER 400 Horizontal Slow Speed Single Shaft Wood Grinder w/Vibratory ConveyorSpecifications: -- 6" High (160 mm) x 15-11/16" (400 mm) wide max. infeed opening, 50 HP rotor motor, 14" dia. rotor grinds at 620 RPM (fixed rotor speed depending on application). -- Equipped with: -- Patented "V-ROTOR" design utilizes a v-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- Features: -- (22) Replaceable back bolt-on cutter knives (welded knife holders standard, bolt-ons per customer request), recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. -- Infeed roller with replaceable wear strips for ease of maintenance, feed speed is controlled by monitoring the amp draw of the rotor, preventing "braking" or excessive pressure on the rotor, the vibratory infeed conveyor (12'), is also tied into the feed roll to eliminate binding. -- 9.85" (250 mm) Dia. dust collection outlet (3,000 CFM required). -- Includes: -- Heavy Duty low-profile frame (15-3/4" passline height); integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge); up to 16' vibratory infeed conveyor available.

WEIMA WLK 800 Vertical Hopper-fed Low-noise Grinder --The beginner model WLK 800 is designed for the high throughput quantity and is especially suitable for the processing of nearly all plastics. Without any problems, i.a. start-up lumps, pipes, automotive-workpieces, blow-moulding-materials like PET-bottles, PE/PP-bottles, canisters and pails and also paper, cardboard and light metal. WLK shredders can be fed per conveyor belt, stapler or manually and are selectively equipped with mechanisms or a hydraulic drive. -- 48 HP --Cutting Chamber Dimensions 800 1450 mm

WSM - 2852BH, ...Heavy Duty Hammermill/Shredder. -- 200 HP - 1,165 RPM Motor -- Infeed opening size: 52" L x 28" W -- Infeed with: Feed roll, 1-1/2" teeth with 6" spacing. -- (2) Types of Hammers: One a rounded style with hard-faced tips.Machine is part of a Pallet Recycling Plant and includes: -- Pallet Feeder -- Dual Chain Conveyor. -- Vibratory Feeder. -- Inclined Oscillating Table.

WILLIAMS - Hammer Mill: Half-round Type ConfigurationFeatures: -- 220 HP Main Drive Motor with Belt Drive; complete with Guard. -- 26"; x 12"; Input Opening. -- Powered Input Pull Rolls -- 4"; Main Shaft with Swing Hammers, approx. 3/8"; thickness -- Ratchet Lift Access Lid. -- Mounted on Steel Support Structure with Access Platform and Ladder -- Pneumatic Bottom Discharge with built-in Viewing Window in Ducting below the Hammermill (no fan included) -- Electrical Cabinet with Motor Starters -- NOTES: This machine was last utilized to break up virgin dried pulp for further processing. Already been removed from service – ready to load.

MODEL ZTLP 1800 X 1600 Zeno Low Noise Single Shaft Shredder/Chipper Specifications: --Model ZTLP 1800 X 1600 -- Feed opening 70’’ (1800mm) wide x approximately 62’’ (1600mm) long. --24’’ Diameter x 70’’ long single rotor with bolt-on blades. --Hydraulic pusher ram feed. --Shredder driven by a 105 kW (140 hp) --3/60/460 volt --1780 rpm motor --No Control Panel --New in 2005

ALJON - 400XL, ...Logger/BalerSpecifications: --Scrap Metal (average): 6 - 10+ Metric tons/Hr. -- Approx. (14,500) hours.Dimensions: --Height: 13 Ft. - 6 in. (4,115 mm). --Width: 8 Ft. (2,438 mm). --Length: 39 Ft. (11,887 mm). --Weight: 61,850 Lbs (28,055 kG). --Tires: 11:00 x 22.5 Tubeless Radial Tire. --Loading Area: 8 Ft. (2,438 mm) x 12 ft. 4 in. (3,759 mm). --Log Size: 20 In. (508 mm) high x 32 in. (813 mm) wide x variable length. --Density: 25 - 60 Lbs/cu. ft (400 - 961 kG/cbm).Material Handler --23 Ft. (7,010 mm) Boom Reach. --The "400XL" Baler’s curved box design and larger loading chamber efficiently process: Bulky loose scrap, white goods, and gauge material down to manageable 20 in. (508 mm) x 32 in. (813 mm) x variable bundles; 20 in. (508 mm) minimum. The operator controls the 3-way compression process from the cab.Final compression is fully automatic. Increased hydraulic power allows the operator to sort & stack material during the automatic baling cycle, eliminating lost labor time and minimizing the labor cost per ton. -- NOTE: The main piston needs work (leaking), and (1) piston that closes the box needs to be rebuilt.See the attached literature for detailed technical specifications.

ALJON - IMPACT V, Used Car CrusherElectric but includes generator and trailer, Includes RemoteOnly 1,470 HoursSpecifications: -- 40-Gallon Diesel Tank. -- Loading Area: 84" W x 240" L. -- Overall Dimensions: 43' L x 8' W x 13-1/2' H. -- 8" Bore cylinder, 5" dia. shaft. -- 81" Stroke cylinder. -- 301,600 Lbs Total combined Cylinder Force. -- 3,250 PSI.

ALLEGHENY - 18-250C, ...Paper Shredder -- 20 HP Motor -- (250) Sheets per pass -- 1/2" Straight cut -- Loaded onto your Truck

ALLEGHENY 20-350C DOCUMENT SHREDDERSpecifications: -- 40 HP Motor -- 7/16" Cut Width -- Feed Opening 20" -- Dimension 70" x 107" x 55" -- Weight 6,295 Lbs

AMERICAN PULVERIZER Model "TRS" Portable Shredder with BHS Trommel and Conveyor --400 HP Portable Tire Shredder --Diesel motor, hydraulic conveyors. --Everything except infeed conveyor Mounted on a trailer. -- BHS Trommel

ARJES - IMPAKTOR 250, ...Dual Shaft ShredderIncludes Caset and Paddle Shafts - New in 2020Model "Bandit" with the following features: -- Dual shafts with synchronous/asynchronous drive (80,000 ft/Lbs torque)! --Quick change cassette system: Allows simplified maintenance, replacement, or refurbishment. -- Mechanically adjustable side combs (runs open or closed). -- Weighs approx. 15 tons and can easily be transported. -- Wide profile discharge belt. -- Wireless radio remote controls all track & shredding functions. -- Automatic reversing function protects against fracture of the cutting tools. -- Length: 22’; width: 7’ - 10-1/2";; height: 9’-2";; weight: 29,763 Lbs. -- Hopper size: 98-1/2"; x 62";. -- Engine: 220 HP (164.1 kW); VOLVO "T4f". -- Shafts: 59"; 1.5 m Shaft Speed: 11 - 45 RPM -- Torque: (2) 80,000 Ft.-Lbs. -- Conveyor width: 31-1/2"; Conveyor speed: 118 IPS; 3 MPS. -- Discharge Height: 11’-5";. -- Fuel Tank: 92-Gallon. -- Hydraulic Tank: 18-Gallon. --Unlock unparalleled shredding capabilities with the 2020 Bandit ARJES Impaktor 250 Shredder, equipped with advanced features including caset and paddle shafts. This industrial powerhouse is ready to elevate your operations to new heights. This is your opportunity to own cutting-edge machinery that delivers efficiency, versatility, and reliability. --Key Features: 1. Efficient Shredding Mechanism: • The inclusion of caset and paddle shafts ensures a robust and efficient shredding process, making quick work of various materials, from wood to construction debris. 2. Versatility for Multiple Applications: • The Impaktor 250 is designed to handle diverse materials, making it ideal for applications in recycling, waste management, forestry, and more. Adapt to different challenges with ease. 3. Exceptional Mobility: • Benefit from the mobility of this shredder, allowing you to take it to different job sites effortlessly. Its compact design ensures easy maneuverability in various environments. 4. User-Friendly Controls: • Take command with the intuitive control system, allowing operators to adjust settings and monitor performance for optimal efficiency. 5. Safety at the Forefront: • Safety is paramount. The Impaktor 250 is equipped with features such as emergency stop buttons and safety interlocks to ensure a secure operating environment. 6. Output Size Control: • Customize your output with mechanisms that control the shredded material's size, giving you flexibility for specific applications.

YM-800 1 YARD 4 OR 5 TINE Orange Peel GrappleSpecifications: -- Operating Weight 2,400lbs -- Opening Width 71 1/8" -- 4 or 5 Tine in stock - Ready to ship -- Rotating -- Hanger for Extra Cost

CAM-WOOD WX-1502H Horizontal GrinderFeatures Impact resistant tooling with excellent wear capability. Specifications: -- Horizontal feed, 20 HP - 1,750 RPM drive motor; 15-3/8" x 2-3/8" infeed chute; 8" dia. air discharge. -- Equipped with: -- (18) rotary cutter sets with cutter head angle to allow aggressive cutting rates and high-speed shredding of waste; (4) stationary cutter sets; 10" dia. rotor; 575 RPM. -- The shaft rest for the cutter head is constructed by round hollow with special angle for cooling during production. -- Complete with: -- Removable screen for easy cleanup and chip size changes from standard 1/2". -- Includes: -- Operators' & Parts Manual and covered by (1) Year Warranty.

CAM-WOOD WX-4150 Vertical Grinder-ShredderImpact resistant tooling with excellent wear capability. Specifications & features: -- Vertical-feed Chute, 50 HP - 1,750 RPM drive motor; 41" x 12" infeed chute; (12) rotary cutter sets with cutter head angle to allow aggressive cutting rates and high speed shredding of waste. -- The shaft rest for the cutter head is constructed by round hollow with special angle for cooling during production. -- Complete with: -- Removable screen for easy clean up and chip size changes from standard 1/2". -- OutPut: -- 1,300 - 1,800 Lbs/Hr, depending on material and moisture content. -- Includes: -- Operators' & Parts Manual and covered by (1) Year Warranty.

CP100 Can Flattener --220V, 1200 lbs per hour --Infeed Conveyor --Magnetic Separator -- New belt included

CRESSWOOD HF-36-30 Wood Grinder --Motor HP 30 --Cutting Chamber 36″ x 45″ --Ram Stroke 30″ --Rotor Diameter 10″ --Grinding Head Speed 50-150 rpm --Frame Thickness 3/4″ --Number of Cutter Teeth 42 --Shaft Diameter 4″ --Mid-Range Hopper Volume 2.5 Cubic Yards --Floor Area of Unit 71″ x 195″ -- Includes Control PanelShipping Weight 5,700 lbs. Specifications are subject to change The output of these machines can be optimized for your application by selecting different screens, amount of cutter teeth, cutter teeth placement, and rotor selection";

CRESSWOOD EF-30LR HORIZONTAL WOOD GRINDERThe Cresswood EF-30LR Shredder is built to take on your toughest wood waste challenges. Designed for high-volume shredding of pallets, crates, rippings, cut-offs, blocks, and particle board, this horizontal end-feed grinder ensures consistent material flow and maximum throughput. Its durable construction and smart engineering make it ideal for heavy-duty use in lumber yards, manufacturing, and woodworking facilities. With an intuitive design and powerful components, it's built for long-term productivity.Key Features & BenefitsOptimized Material Flow with Variable Speed Feed Roll• Get consistent feed performance, no matter the material size or density• Automatically adjusts feed speed to prevent jams or overloads• Handles a variety of wood waste types with easeRugged Construction for Long-Term Durability• Built tough to withstand years of industrial use• Heavy-duty steel frame resists vibration and wear• Spherical roller bearings increase strength and longevityAdvanced Cutting Technology for Maximum Output• Delivers consistent particle size and clean, efficient cuts• Equipped with a high-efficiency Destroyer Cutterhead• Replaceable anvil supports extend component lifespanSmart Operation & Maintenance Features• Designed for easy servicing and user-friendly controls• Easy access panels simplify maintenance and part replacement• Standard 12′ vibrating conveyor ensures reliable outfeed

EVASHRED EV60E Dual Shaft Shredder with Infeed ConveyorEvashred is a well-known brand of commercial mobile and stationery shredders for solid waste designed and manufactured by F.V. Evans and Sons also known as Evans Engineering.Every type of shredder is designed specifically to shred a particular type of solid waste including Documents, Car & Truck Tyres, E-scrap (Hard Drives, Computers, Printers known as E-waste and e-scrap), Plastic, Foam rubber, Green Waste, Building Waste even Hospital WasteSpecifications: --30 kW / 40 HP Maximum Power --28-30 RPM Cutter Speed Rotation --Width 640 mm x 37 5mm Cutting Chamber Opening