EX-FACTORY INC.
EX-FACTORY INC.
 704-841-2001

Backed with a massive machinery database considered to be “the blue book” of woodworking machinery), EX-FACTORY Auctions provides a complete assessment of your equipment and allows you to interact with the market real-time in our dynamic Online Auction!

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 2
38 Results Found
Sort By 
EX-FACTORY-INC
 704-841-2001
Kaval COMMANDER  Door Machine
Call for Price

KVAL, INC. - THE COMMANDER: Door Line with KVAL 555: Door Sizer/Beveller. Used package consists of: -- KVAL COMMANDER Prehung Door Machining Center. -- NORFIELD Door Loader (Shared with adjacent NORFIELD 5000.5001/5002) -- KVAL 555 Door Sizer.NOTE: The following information/specifications are provided for reference & needs to be verified by Buyer prior to Purchase.Automatic Cylindrical Lock & Hinge Machine for: Prehanging interior & exterior Doors; for doors up to: 2-1/4" thick x 4' x 9'; routes & predrills for up to: (4) Radius hinges on bevel doors. -- Traveling hinge router stops: At each collar on the index shaft; tilts into dapp: 3-1/2" - 5-1/2" Hinge pocket on square or bevel doors. -- Microprocessor control allows: Selector switch sequencing for (2 - 3 or 4) hinges; 1/4" or 5/8" corner radius; door/jamb or door only machining.Turret stops determine hinge size. -- Hinge index bar with: Embedded scale can be interchanged with other preset index shafts for rapid hinge center adjustments; or collars can be adjusted along the scale. -- Heavy-Duty lock section features: 5 HP Face bore; 3 HP latch bore; 1-1/2 HP plate router; adjustable for 2-1/4" - 5" back-sets with: Self-centering clamp system for: Face plate & latch hole; plate router adjusts for square or beveled face plates up to 12" long. -- Jamb clamps front load for: Easy handling self-adjustment; there is no jamb width limitation. -- KVAL - 555 Door Sizer/Beveller. Single-sided feed through unit: (1) Vertical spindle with: 5 HP Main motor; spindle tiltable from: 0° - 3-1/2° for bevel edging of door; feed system with: Overhead feed rollers; fence line adjustable from: 12" - 48".NOTES -- All equipment as taken from service. -- Does not include: Setup, installation, or freight. - Available at additional cost. -- Photos describe the machinery as it was removed from service & not in reconditioned form. -- This equipment was installed adjacent to a Norfield 5000/5001/5002 sharing a common Norfield Loader. See DM-010596

 704-841-2001

 Call
1996 Norfield 250-M  Door Machine
$3,380

NORFIELD - 250-M: Strike Router -- Strike Router capacity: 9' Length x 1-5/8" thickness cap.; infinite width; mortising plate & bolt relief in: (1) Continuous operation. -- 1-1/2 HP Router: Processes any strike up to 4-7/8" long, including T-strike. -- Rectangular relief leaves more wood in jamb for greater strength and more professional appearance.

 704-841-2001

 Call
2003 Norfield 5000/5001/5002  Door Machine
Call for Price

NORFIELD - 5000 + 5100 + 5200 Package: Door Line. - Used NORFIELD Door Line includes: NORFIELD - 5000: Door Machining Center. NORFIELD - 5200: Automated Door Loader. NORFIELD - 5100: Assembly Center.NOTE: The following information/specifications are provided for reference and needs to be verified by Buyer prior to purchase. -- Door capacities: 1-1/2' to 3-1.5' Wide x from 6-1/2' to 7'-0" tall x from 1-3/8" to 1-3/4" thick. Jamb capacities: 2-1/2" to 10-1/2" wide x 6-1/2'" to 7'-0" tall x from 1/2" to 1-1/2" thick. -- For flush, stile, and rail; and louvered doors and: Flat, split, & rabbeted jambs. -- For lock: 2-3/8" & 2-3/4" backsets; hinge mortising for: 3-1/2" x 3-1/2" & 4" x 4" x 5/8" Radius; faceplate router up to: 1-1/4" x 2-3/4"; hinge radius of: 5/8"; hinge pattern adjustable from: 29" - 33" center-to-center. -- Machining cycle: Under (30) seconds. -- Door clamps up: Eliminating changeover for interior & exterior doors. -- Lock drilling from underside of door enables operator to: View exit cut & provide quality control. -- Automatic butt routing system with: Chip breaker for clean mortising. - Automatic changeover: Between 3-1/2" x 3-1/2" & 4" x 4" hinge mortising. -- Automatic lock machining; drills for lock & latch and routes for the faceplate in: (1) Cycle; centrally located electrical panel provide: Safe & easy operation. -- Automatic changeover for: Interior & exterior doors; eliminates adjustment time. -- Microprocessor technology: Minimizes maintenance downtime. -- 6 CFM @ 90 PSI; 1,900 CFM @ 8" Dust outlet.NOTES: -- All equipment as taken from service. -- Does not include: Setup or installation; freight. - Available at additional cost. -- Photos describe the machinery as it was removed from service and not in reconditioned form. -- This equipment was installed adjacent to a KVAL COMMANDER Door Machine and kval 555 Door Sizer/Beveller and shared with a Norfield Door Loader. See DM-010597

 704-841-2001

 Call
2026 Quick N-P80-01-10-10PL  Door Machine
$18,850

1' x 10' pressing capacity via (10) 1' x 1' platens. Pod Press produces 78,000 lbs. total platen force (7,800 lbs. per platen) at 120 PSI supply air pressure; suitable for lighter-duty (high-pressure laminates to composite substrates) and heavier-duty (wood veneering) applications. 40" fixed daylight; vertical structural frame members and hinged containment fences arrangement for end-loading and side loading the press. -- Horizontally-adjustable vertical containment fences keep laminated material from sliding while under pressure. (10) 10"" maximum diameter air pods with 5" stroke; each air pod with separate hand-operated air valve; each air pod / platen activates individually. Main air valve controls all "activated" air pods at once; various pods are controlled together, or each pod can be controlled separately. -- NOTE: Special Press configuration for use in stile and rail entry and passage door operations.

 704-841-2001

 Call
2026 Quick 06 SECTION HEAVY DUTY-P  Door Machine
Call for Price

QUICK '6-SECTION HEAVY DUTY-P CLAMP CARRIER (Pneumatic). -- Overall Data: Heavy Duty 16.5' wide (16.5' maximum stock length capacity), 6-section Thick Stock Pneumatic Clamp Carrier with (72) 3.5" high, 40" opening clamps; (12) clamps per section. -- Includes: Pneumatic Clamp Tightener, Pneumatic Panel Flattener, Electric Motor Drive with Automatic Rotation Cycle. -- Major Parts & Components list as follows:Qty Part# Description Each Total (1) A-CCFP-16.5-06 CC Frame Pneumatic, 16.5' wide, 6 Sect. $9,900.00 $9,900.00(72) B-CLMP-3.5-40 Clamp, 3.5" high jaw, 40" opening 82.00 5,904.00(1) C-PCT1-16.5-06 Pneumatic Clamp Tightener, 16.5' wide, for 6-sect. CC 4,450.00 4,450.00(1) D-PPF1-16.5 Pneumatic Panel Flattener, 16.5' wide 2,200.00 2,200.00 (1) E-EMDR-06-16.5 Electric Motor Drive for 6 Sect. CC, 16.5' wide, #135 2,450.00 2,450.00 TOTAL ..................................................................................................................................... $ 24,904.00.OPTIONAL(24) B-CLMP-3.5-40 Clamp, 3.5" high jaw, 40" opening 82.00 $1,968.00 -- Note: Lead time is about (8 - 10) weeks.

 704-841-2001

 Call
2011 Ruvo SSR  Door Machine
Call for Price

TRIAD/RUVO/MERRICK MACHINE SSR CNC 'Smart Stair Router' with new PC, CNC controller and software.CNC Controlled Stair Trencher for 2" x 10" or 2" x 12" max. stringer size. -- Operation: Automatic operation by entering the parameters of the stringer on the touch screen and press the RUN button and the SSR will do the rest. -- Routers: (2) Heavy duty 2 HP Belted routers with 1/2" collet. Will cut the top or the bottom stringer only or both stringers simultaneously with the specified profile, it will automatically index the material the proper distance. -- Capability: Can accommodate standard stair profiles, no rise profiles and split stringer configuration, closed/open stringer; User configured hard or soft wood selections automatically adjust the router feed rate to maximize performance. Features: -- (2) Stepper-motors powering (2) linear actuators for cutting stair profile. -- Same stepper/actuators will move the board along indexed for macining subsequesnt steps -- 628 Lbs Vertical clamp and 352 Lbs pressure horizontal clamp. -- Tread 8" to 12-1/2"; Riser 5-1/2" to 9"; Nose clearance 1/2" to 3"; Nose extension 1/2" to 2"; tread thickness 1" to 1 3/4"; stringer material 2" x 10", 2" x 12", 3/4" x 10", 3/4" x 12". -- No riser menu selectable. -- Bit size: 7/8" Dia. straight flute RH or LH. Comes With: 'WIN 11' DELL compact PC mounted inside the main control panel; CENTROID/ACORN step and direction CNC control system w/built-in motion control CPU kit. Touch screen display/keyboard/mouse. Hand-Held remote control. Currently setup to program any jobs via G-Codes. An end user can also add a CAD/CAM software with post processor which will allow programming jobs from office.

 704-841-2001

 Call
2026 Ruvo 505  Door Machine
$94,500

RUVO 505, ...Prehung Door Machine.Handles a wide range of door, jamb, and hinge sizes. - Bevels doors and door hinges. - Designed for efficient handling and operation. - Fast, accurate hinge and lock backset adjustment. - Residential, Commercial, Architectural, and Labeled Fire Doors.Features: Heavy duty powered 3° beveler/sizer. Routers to ease door edges. Accurate target scales. The 4-hinge and jamb route location changes fast and precisely. A similar system for the backset on hinges & locks. Provision for single and double-belled doors. Controls interlocked by a PLC. Auto door sizing is fast to adjust the lifter bar by digital input and servo control. Reliable, long-lasting non-contact sensors. Fast push-pull controls with a friendly touchscreen HMI. Hinge screw gun and pre-drill included.Technical Details: Max Door Height: 6’ - 9’ or ADA Specs 6’ - 8’. -- Door Width: 1'-6"’ to 4’. -- Door Thickness: 1-3/8"; to 2-1/4. -- Jamb Size and Styles: Up to 1-1/4"; x 10";, all styles. -- Number of hinges: Up to (4); Hinge Size: 3-1/2" to 5";; Hinge Radius 1/4" to 5/8". -- Hinge Backset: Scaled as required -- Lock Bore Sizes: 2-1/8"; Standard. -- Lock bore Backset: Scaled to 5";. -- Lock Bore Latch plate: Up to 1-1/4"; x 8";.Machine Size: 18’ x 3’ x 7’; Approx. Machine Weight: 3,200 Lbs; Electrical: 4-Wire, 230/3/60 and draws 25 Amps. Requires a 1/2" airline using 40 CFM @ 90 PSI.Options Include: -- Built-In Power Beveler Vacuum System......$ Please call. -- Screw Driver............................................... Included. -- Pre-Drill Kit.................................................. Included -- Digital Readout ..........................................$ Please call.RUVO 512, ...Heavy Duty Strike Jamb Mortising Machine.For Jam Sizes up to 1-1/4"; x 9"; x 10";. Strike Plate mortise to 6";. Compliments Jamb Preparation of the RUVO 505 and 405. Operated by one worker.Unit Includes: -- Adjustable Jamb Stops. -- Heavy Duty Construction. -- Foot Pedal Actuated Clamp. -- 120 Volt, 1-Phase, 20 Amps. -- 1/2" Airline needs 0.5 CFM @ 100 PSI. -- 1.5 HP Router.@ 23,000 RPM. Additional Cost for the RUVO 512 above ...$Please call.Material Handling for the Line:Loading Device..........................................$ Please call.Unloading Device.......................................$ Please call.

 704-841-2001

 Call
2026 US Concepts FAS-COBRA  Door Machine
Call for Price

US CONCEPTS FAS-COBRA Handrail Router with 90° tilt and auto feed. Can handle the squaring and dimensioning of the laminated glue-ups, as well as profile shaping of the spiral, curved and straight handrails. Designed to use corrugated back profile knives in a 100 mm dia. head. -- Capacity/Drive: 5" Max. handrail height, 4" max. handrail width, 6-1/2" max. cutter diameter; powered by 7.5 HP spindle motor at 6,200 RPM; spindle has 1-1/4" diameter. -- Standard equipment includes: Automatic starter with motor overload protection; variable feed speed controller; (2) 0.5 HP SUMITOMO Cycloidal gearmotors; 0 - 30 FPM variable speed feed. 2-axis adjustment; cast iron dovetail slides; spindle tilts to 90°; cutterhead guard and UL/CSA electrics. -- Handrails are machined laying on their side. The horizontal cutterhead with profile knives shapes the inside edge first from the top and the outside edge from underneath. -- Vertical spindle position can be used for squaring of the glued edge (bottom of the handrail) with straight knife or squaring and grooving with profile knives. -- Options available: Dynamic braking, Electronic scale for up/down adjustments. Electronic scale for in/out adjustment, Motorized up/down adjustment, Export crating, Please call for current prices.

 704-841-2001

 Call
2026 US Concepts CSR-750 CNC  Door Machine
Call for Price

US CONCEPTS CSR-750 CNC Stair Router/Trencher. -- Specifications: -- Electrical 208V, 230V 45A or 460V 25A, 575V (TBA), 3-phase -- Max material width 14" -- Material thickness: ¾" - 3-1/2" -- Tool shank capacity ¾" -- Max. feed speed 300 FPM -- Communication ports: RS232, USB, network -- Machine dimensions 64"W X 92"L X 72"H -- Weight approx. 4300 lbs -- Dust outlet 8" -- Collets (2) ½" ID & (2) - ¾" ID -- Set of Dove-Tail Router Bits (1) RH & (1) LH --OEM Warranty. - Fifteen (15) months following the date of shipment,or twelve (12) months from the date the Products has completed mechanical start up,whichever is first. --Options (subject to change): -- Interior Fluorescent Light; Standard crating; Export crating as per ISPM-15; Factory Setup & Training,

 704-841-2001

 Call
Wise 5200  Door Machine
Call for Price

WISE 5200 Semi-Automatic Stair Router. Approx 2" x 12" Max. stringer size, Semi-Automatic operation. -- Capacity: STRINGER: 1 - 2" Thick. 10 -12" Width. TREAD: 1 - 1.5" Thick. 8 - 11" Width. RISER: 3/4" Thick. 5 3/4" - 9" Height. -- Comes with: 3/4" dia. Carbide Tipper Cutters. -- 4 HP (12A @ 208/230/3/60) Approx Belted motor to "top & bottom" Approx.10,000 RPM spindles, Top/Bottom heads are arranged to jump in & out to facilitate open plan stairs. -- Automatic pneumatic clamping of stringers, spring loaded side pressure to keep stringers against the fence, mirror-image routing on (1) pair of stringers at one time, graduated template automatically sets up to stated tread & rise, cuts standard wedge taper for both treads and risers. -- Pressurized Air: 3.0 CFM @ 110 PSI. -- Overall Dimensions & Weight: 60" wide x 36" deep x 60" high. Approx 1,800 Lbs. -- Sold with (3) days warranty on all pneumatics. Factory refurbished: "Gone through and replaced any parts that were not up to standard".

 704-841-2001

 Call
2026 Wise 5200  Door Machine
Call for Price

WISE 5200 Twin Stair Trencher; 2" x 12" Max. stringer size, Semi-Automatic operation.Specifications: -- 5 HP Belted motor to "top & bottom" 10,000 RPM spindles, T & B heads are arranged to jump in & out to facilitate open plan stairs; -- Automatic pneumatic clamping of stringers, spring loaded side pressure to keep stringers against the fence. Features: -- Mirror-image routing on (1) pair of stringers at one time, graduated template automatically sets up to stated tread & rise, cuts standard wedge taper for both treads and risers.Includes: -- Heavy Duty TYLER Spindles, built-in jump dado function, clamp, and feed system.

 704-841-2001

 Call
2026 Wise 1525  Door Machine
Call for Price

WISE Model 1525 Hinge Jamb Machine; Designed for quick and accurate hinge patterns.Specifications: -- Jamb length up to 8', hinge size unlimited, radius 1/4" or 5/8", jamb width unlimited. -- Equipped with: durable accurate linear glide base, quick change out for variable parts. -- No templates are required, and additional stop bars are available.

 704-841-2001

 Call
2026 Builders Automation Machinery 2220  Door Machine
Call for Price

BUILDERS AUTOMATION (BAM) 2220 Stair Wedge Cutter. Automatically cuts wood wedges used to lock stair treads and risers into slots in stair stringers.. -- Equipped with: 10" Dia. saw blade with 1.5 HP direct drive motor, hopper feeds material automatically, air operated with 6 CFM compressed air requirement, 1.8 Sec/stroke. -- Features: Auto-shutoff feature and capability to cut glue blocks. -- Upright guide expandable to hold up to 40 pieces of wood at one time -- Rapid changeover to cut glue blocks for more efficient operation -- Once cycle started, hands-free use for labor-saving utilization -- Enables you to easily change size or angle without tools saving time and improving productivity -- Utilizes a 1.5 HP saw that automatically cuts pieces up to 9-1/2" W x 11-1/2" L -- Operator panel includes key start and e-stop controls for the saw motor and start/stop control for the pneumatic system that coordinates all machine motions -- Capable of producing wedges of varying thickness on alternate strokes of the saw -- Scrap material is ejected under the machine, and the wedges are discharged into user-supplied hoppers -- An included discharge chute diverter separates automatically and directs wedges of different thicknesses (produced on alternate saw strokes) into separate hoppers (user-supplied) -- Sawdust carried away from the saw guard pick-up through a 3" diameter hose -- Comes with manufacturer's standard 1-year warranty -- Complete with: Self-diagnostics, built-in starter, automatic shutoff feature, air filter & lubricator.

 704-841-2001

 Call
2026 Builders Automation Machinery MFSR  Door Machine
Call for Price

BUILDERS AUTOMATION MFSR CNC 5-Axis Multi-Function Stair Routing Machine, fully programmable.Specifications: -- Axis Configuration: 1.) X axis; 2.) Y axis; 3.) Top Z (top router depth control); 4.) Bottom Z (bottom router depth control); 5.) Axis A (advancing of board) -- Features: Programmable Touch Screen for simpler stair characteristic input by operator; Touch Screen for landing cut both top & bottom for open box & contemporary; Two (2) high frequency routers with 7.5 HP @ 24,000 RPM fan-cooled spindles that can accommodate shanks of ½" or 3/8" diameter.Accepts one or two stringers at a time -¾", 1", 1½" thick for a total of 3" maximum thickness and 7¾" to 15¾" wide; Extra wide ¾" guide rails for more bearing surface with a 3¼" high fence. -- Includes: (5) Cylinder clamps - 3 fixed and 2 adjustable for up to 2,950 Lbs of vertical stringer clamping force. Additional 1,180 Lbs horizontal clamp force for a total of 4,130 Lbs.; Self-centering feed system on linear bearings for better support and elimination of wear on the brass parts; Accommodates staircase angles from 20° to 45° and riser kickback from 5° to 11° with landing cut; Cuts up to ½" deep in yellow pine at the maximum rate of 20" per second and an open stringer in a single cut;Programmable to cut any combination of box, contemporary, or open stairs with landing cut; Completes the top and bottom landing cut without additional handling or manual sawing. Adjustable setting for wedge fit or material variances. -- Production rate: Approx. cycle time 10 Seconds per 7/11 tread in 1 or 2 stringers. -- Comes with: Dust collection cups on each router for clean efficient operation.Manufacturer's standard 1 year. -- Overall Dimensions/Weight: Measures approx. 8′ x 6′ 5″ x 7′ high; Gross weight approx. 3,500 pounds. -- Services required: Air requirements 15 CFM @ 110 psi, (minimum ¾" diameter unrestricted line);Electrical requirement 230 V, 3-phase at 70 Amps. -- Available Option: Extra wide, custom version that cuts down the middle of up to a 24" wide stringer, yielding two sets with no waste (except sawdust).

 704-841-2001

 Call
2026 Cam-Wood PT-48VAX  Door Machine
$19,500

CAM-WOOD PT-48VAX Door Clamp (Single Sided). -- Work Space: 48" Max. width x 97" max. length, hydraulically operated.Specifications: -- Applies max. 11,000 PSI pressure from (2) sides; 90 PSI from holddown. -- Includes 5 HP hydraulic pressure system. -- Hydraulically operated assembly table; twin hydraulic cylinders for moveable rams at two sides pressing for max. assembly capacity. -- Easy adjustments of rams, makes changing sizes simple; separate controls for adjusting the each side of press rams. -- Fixed reference points for lower & left edges ensure 90° assembly of face frames; heavy gauge steel metal table & frame.NOTE: Also available as a 2-sided Clamp for ...$26,500.

 704-841-2001

 Call
2026 Cam-Wood PTX-2513X  Door Machine
Call for Price

CAM-WOOD PTX-2513 Entry Door/Window Hydraulic Assembly Press, 4' x 8'. Hydraulically operated. Solidly constructed and welded with great precision.Specifications: -- Working area:1300 mm (51") Max. width; 2500 mm (98") max. length. -- (2) Vertical cylinders, each of stroke 80 x 600st; (2) side cylinders, each of stroke 50 x 800st. -- Comes with: 2 HP hydraulic pump motor. -- Outer structure is made of two vertical beams which are individually located at the upper and the bottom side of the machine. The horizontal beams have vertical hydraulic cylinders thereby moving beams up and down to distribute the pressure evenly on the workpiece. The overhead push button operates the hydraulic motor. -- Stops (square blocks) are moved manually to set to the desired position. The mobile pressing platen of the square block and the horizontal upper beam can be moved by the vertical hydraulic cylinder. -- Equipped with: A pressure gauge and pressure control valve to regulate the vertical and horizontal hydraulic cylinders for precise, desired working pressure. -- Overall Dimensions/eight: 3000 x 1200 x 2200 mm (120 x 48 x 87"). Weight: 1200 Kg (2650 Lbs).NOTE: Also available in 5' x 10' Press for ... Please inquire for prices.

 704-841-2001

 Call
2026 Cam-Wood EX-ARES  Door Machine
Call for Price

CAM-WOOD - EX-ARES ...CNC Door Processing Machine Center for Pre-Hung Doors with Automatic Tool Changer. Distinctive design for Door Pre-Hang Processing. -- All the 5-side Project Processing -- Automatic Feed Through (Options with Auto Loading and Out-Feeding) -- Hinge Face Milling, Screw Hole Drilling -- Lock Bore Drilling -- Latch Face Milling, Latch Bore Drilling. FEATURES: -- DSP CNC controller is setup to accept standard G-code programming formats along with on board conversational applications. -- Optional CAD/CAM system can create and edit part programs then send to machine for easy cutting. DXF files can imported, modified, and edited from here to create a G-code. -- Horizontal and vertical spindle for top and side stock processing -- Machine designed ready for 3-D cutting usage and superior performance. -- Moving gantry construction for space saving. -- The rigid steel frame construction has been stressed relieved prior to finish machining to provide repeatability and accuracy. --Automatic frequency brake for the spindle allows rapid deceleration resulting in faster tool changes. -- Linear guides and sliding blocks are prismatic pre-loaded with recirculation bearings to ensure maximum rapid traverse and precision. -- The X & Y axis equipped with a precision rack & pinion driving system. The Z axis utilizes a ball screw assembly complete with the pre-loaded and ground screw for long life and optimum accuracy.SPECIFICATIONS: -- Working size 51"; Width x 98"; Length x 7-7/8"; Height (Door Lock Maximum Depth 4-3/4";) -- Custom made door vacuum table (Optional Vacuum Pump) -- SYNTEC 60WA control with All in one PC Controller -- 9.0KW air cooling Spindle with 4 pcs ISO30 tools linear ATC for Top Side Milling, Drilling, Lock, Bore.. Processing -- 6.0KW double Side milling Spindle at X direction for X Axis Two Side, Milling, Drilling, Ball Catch, Split Line. Processing -- 6.0KW double milling spindle at Y direction, Two Side, Milling, Drilling, Hinge, Latch Hole, Face, Dead Ball, Processing -- 2.2KW 4 Side Milling Spindle for All the 4 Side, Small Holes, or Screw Hole Drilling process -- 1500W servo drive. -- Max travel speed 200 FPM (60m/min), Max working speed 50 fpm (15m/min) (According different processing material) -- Professional PTP table with German SCHMALZ Vacuum pads 6pcs -- 2M helical rack, 30 square rails & Ball screw -- Automatic control with Aluminum oil pipe Oil lubrication.OPTIONS: -- 10' table capacity ...............$US. Please call. -- ARES Options for 3 Degrees Bevel.A.) Pre-set the Angle heads point to left or right side at tool rack. HSD Angle Head $US8,990.00 each (most time, it will need at least two units, preset to 3 degrees, one bigger cutter for routing, one small cutter to do re-fine the latch corner or drill the screw holes).B.) Upgrade to Italy HSD C Axis System add $US Please call . (Horizontal 360 Degrees turning, it can work on all the 4 door edges). Plus, HSD Angle Head $8,990.00 each (most time, it will n

 704-841-2001

 Call
2026 Cam-Wood DS-4080X  Door Machine
$71,200

CAM-WOOD DS 4080 NC Control Squaring Saw -- NC controlled cutting saw (4) blade heads for squaring up to 1,200 mm X 2,450 mm (47.2" X 96.5")Features: -- Automatic Cutting Cycle for all the 4 side with mass production capacity. -- Automatic width, length setting by Digital Key Pads. -- Variable Cutting Speed with Inverter. -- Saw head runs on ball bearings giving effortless and smooth movement. -- Heavy sheet metal frame and stand construction. -- Quick tilting positions stop at 45º, right and left. -- Saw head is firmly set at any angle desired. Safety saw blade guard. -- Anti-kickback attachment included. -- Full power industrial motor for durability usage. Overload protection switchTechnical Data: -- Maximum cutting/shaping length 2,450 mm (96.5") -- Minimum shaping length: 1,750 mm (68.9") -- Maximum cutting width 1,200 mm (47.2") -- Minimum shaping width: 600 mm (23.6") -- Saw motors (4) x 4 HP each -- Saw blade diameter 305 mm -- Inverted speed control of the saw movement driven by 1 HP motor from 10 FPM to 60 FPMFloor space requirement: 3,950 mm X 2,150 mm X 2,070 mm (155.5" X 86.6" X 81.5")

 704-841-2001

 Call
2026 Cam-Wood 86PAAUX  Door Machine
$38,990

CAM-WOOD 86PAAU Raised Panel Door Machine machines entry door stile and rail door parts as well as cabinet door parts, chair legs and furniture parts, up to 86" length and 7" width.. One operator to machine profiles to the rail copes, stile and rail sticking and raised panels with rapid change over all on one machine for high productivity. Features Include: -- Hydraulic table movements from right to left to achieve powerful cutting and adjust cutting speed variability. Table movements in and out are pneumatic powered to follow a template sensitively. --One operator to machine all profiles for stiles and rails on one machine, along with raising all panels both edges top and bottom. -- Capacity for machining a 6" arch/oval on panels and rails, and raises both face on a raised panel at the same time (arc size varies depending on cutter diameter). -- Raise a curved panel up to 6" radius both on rails and panels. -- Hydraulic pump unit for accurate table speed control. -- Simple guide system follows templates for curved or arched profiles and is quickly repositioned for straight machining profiles. -- Cutterhead knives can be stacked on the same spindle to eliminate changing machines to machine door parts. -- Easy stop system for door stiles or rail lengths. Two separate stops work for rail/stile/panel arch cut positions. -- Heavy duty 10 HP motor, allows for high speed cutterhead to eliminate unnecessary sanding. -- Proximity switches control the cutting stroke. Linear guide rails and bearing for a lightweight & smooth slide. -- More than one part may be milled at one time. Pneumatic holddown cylinders hold parts tightly without slide during cutting. -- Easy positioning of parts on a precision ground, cast iron table ensures accurate stile rail and panel machining and alignments. -- Machines door stiles up to 86" in length.More Specifications: -- Spindle Motor 10 HP @ 7,000 RPM; Hydraulic Motor 1 HP; Feed Speed 0-60 FPM. -- Spindle Diameter 1-1/4"; Spindle Height 7"; Depth of Radius Cut 6";; Min. Radius Cut 6" (based on cutter diameter) machine door stiles up to 86" in length. Dust Hood is 4" dia. -- Dimension: Length 120";; Operating Length 228";; Width 48";; Height 48";. Weight 300 lbs. Air Supply Required 100 PSI -- Note: Delivery time about 10-12 weeks.

 704-841-2001

 Call
2026 Cam-Wood 102PAAUX  Door Machine
$45,900

CAM-WOOD 102PAAU Raised Panel Door MachineMachines entry door stile and rail door parts as well as cabinet door parts, chair legs and furniture parts, up to 102" in length and 7" in width. One operator to machine profiles for the rail copes, stile and rail sticking and raised panels with rapid changeover, all on one machine with high productivity. Features Include: -- Hydraulic table movement from right to left to achieve powerful cutting and adjust cutting speed variability. Table movements in and out are pneumatically powered following a template with very high accuracy. -- One operator to machine all profiles for stiles and rails on one machine, along with raising all panels both edges top and bottom. -- Capacity for machining a 6" arch/oval on panels and rails, and raising both faces on a raised panel at the same time (arc size varies depending on cutter diameter). -- Raise a curved panel up to 6" radius both on rails and panels. -- Machines door stiles up to 102" in length.Technical Features: -- Hydraulic pump unit for accurate table speed control. -- Simple guide system follows templates for curved or arched profiles and is quickly repositioned for straight machining profiles. -- Cutterhead knives can be stacked on the same spindle to eliminate changing machines to machine door parts. -- Easy stop system for door stiles or rail lengths. Two separate stops work for rail/stile/panel arch cut positions. -- Heavy duty 15 HP motor, allows for high speed cutterhead to eliminate unnecessary sanding. -- Proximity switches control the cutting stroke. Linear guide rails and bearing for a lightweight & smooth slide. -- More than one part may be milled at one time. Pneumatic hold-down cylinders hold parts tightly without slide during cutting. -- Easy positioning of parts on a precision ground, cast iron table ensures accurate stile rail and panel machining and alignments.More Specifications: -- Spindle Motor 15 HP @ 9,000 RPM; Hydraulic Motor 1 HP; Feed Speed 0-60 FPM. -- Spindle Diameter 1-1/4"; Spindle Height 7"; -- Depth of Radius Cut 6";; Min. Radius Cut 6" (based on cutter diameter). Dust Hood is 4" dia. Dimension: -- Machine Length 120";; Operating Length 228";; Width 48";; Height 48";, Weight 4360 Lbs; Air Supply Required 100 PSINote: Delivery time about 10-12 weeks.

 704-841-2001

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved