For pre-glued PVC, veneer, & melamine laminate coil stock; 0.4 - 1.2 mm edge thickness and up to 35 mm panel thickness cap., automatic coil feed. -- Equipped with: Electronically controlled temperature setting for hot air blower, 3,000 watts for up to 650° F temperature, (1) Min heat-up time. -- Guillotine type front & rear end trim (with fast speed, flying knife), top & bottom flush trims with single motor drive to cutterheads. -- Overhead belt type feeder, 16 FPM feed speed. - Mounted on machine base with panel support table.

VITAP LINEA 42 Line Boring SystemSpecifications: -- (2) Drill heads of (21) spindles ea., drills from bottom up, ea. support with 2 HP motor and (21) spindle boring block w/panel support mounted on top; -- Drills panels from 100 - 3,000 mm in length, and 100 - 950 mm in width. Complete with: -- Digital readouts for boring blocks, 2,000 mm bar scale fence with (5) adjustable flip stops. -- (2) Moveable overhead pneumatic holddown cylinders, foot pedal for clamping & boring cycle.

VALPATO LBK-150-ST 1 Feed Through Profile SanderTECHNICAL FEATURES: An added small needle type drum sander can be fitted with drum sanding aggregates of 25, ­30, ­35,­40, ­45 ­50 mm diameters which can be used for tighter curves and smaller radius sanding requirements. Storage compartments (2 in total) are located on each machine extremities, these are easily accessible and can be used for sanding belts and various tooling storage. Sanding belt motor power: 3 Kw Abrasive head motor power: 1.5 Kw Oscillation motor power: 0.38 Kw Feed motor power: 0.75 Kw Motor power for electrical adjustment of sanding group: 0.19 Kw Machine voltage: 480/3/60 Full Load Amps @ 480V: 15A Compressed air: Not required Dust collection requirement one (1) only 6" (150mm) port: 950 CFM Sanding belt speed: 14 Mt/sec Variable speed of the belt: from 5 to 25 m/min Sanding belt dimensions: 150 x 2640 mm Height of working table: 930 mm Dimensions of front working table: 1980 x 250 mm Machine dimensions: 2500 x 900 x 1600 mm Net weight: 1000 KMAIN FEATURES: User friendly PLC touch screen control panel is accessible from 360° by the operator, the control panel is centrally located on the infeed end of the machine. Factory installed variable feed drive (VFD), enables machine to run from 5 M/Min to 25M/min (+/­ 80 ft/Min). The entire sanding plenum rise and fall is motorized, it can be adjusted vertically in height to utilise the full height/width of the sanding belt. An oiling unit ensure long life of sanding plenum rise and fall master cylinder.

VOORWOOD - A 515 GH, ...Arch Door Sander with Floating Head ARCH SANDER with: (4) 1.5 HP Motors for precision sanding; quality sanding using Disc sanding at continuous feed. Equipped with: -- (4) Floating Sanding Stations equipped with: 1.5 HP Precision balanced drive motors and quick change spindles. -- Infeed & outfeed (1st and last) spindles equipped with: Double collets and angular, horizontal & vertical adjustments with accurate and repeatable digital readouts. -- PLC Control with: Monitor at eye level height.Feedthrough Arch Machine capable of sanding arch profiles on cabinet door components, plus can do straight cuts.. .

VOORWOOD M 15A CNC Round End Tenoner & Mortiser for 45° Door --The "M15A" Miter Machine is designed to rapidly make mortise and tenon cuts at 0°, 45° Only, . Parts can be up to 1.5” thick and up to 4” wide, and of ANY length. --A primary application for this machine is for miter cabinet door frames. Parts can be quickly transferred from left to right. They are mortised on the left side of the machine and tenoned on the right. The machine can also mill the slots. --Specifications & Equipped with: -- The mortise station has (3) servo-controlled axes (X, Y, and Z) that are coordinated by the machine controller to achieve complex CNC motion. It is equipped with a collet-style router spindle for cutting. The tenon station uses the same X- and Y-servo-controlled axes as the mortise station and is configured for pneumatically actuated in-and-out movement along the Z-axis. The tenon station is equipped with a direct drive shaper spindle for cutting. -- -- Pneumatic clamping assemblies with non-marring urethane pads are mounted to the hold-down assembly to secure the parts during cutting and these can be adjusted to various locations over the cutting surface. -- -- M15 Miter Machine operator interface consists of a colored touch screen. For simplicity, the entire calibration, setup, and monitoring of the machine are accomplished using only four touchscreen displays. The program designs the depth and location of both the mortise and the tenon. When the design is complete, it is saved in a recipe format. Once this recipe is opened, the operation is as simple and boils down to feeding the substrate into the machine. -- -- The full-color touchscreen panel is located on the front of the machine to provide easy access for setting up or operating the machine. Clamping and shaping operations are controlled by operating lighted pushbutton switches.

WADKIN GD 220 6-Head Feed Through MoulderSpecifications: -- Working capacity: 230 mm W x 130mm H (9.06" W x 5.12" H) Timber admitted, 220 mm W x 120 mm H (8.66" W x 4.72" H) Finished timber. -- Head Sequence: Bottom 7-1/2 HP, Right 7-1/2 HP, Left 7-1/2 HP, Top 15 HP, Bottom 10 HP, & Universal 7-1/2 HP. -- Spindle dia. 40 mm (1.57"), Spindle speed 6,000 RPM. -- Variable feed speeds 6 - 22 MPM (20 - 72 FPM).Equipped with: -- Right, Left & Top heads with Mechanical digital readouts. -- 1/2 HP Motorized feed beam, 2.2 kW Feed motor, 3 HP Cardan drive, Reverse feed, 5-1/2" Dia. Hardened & Chromed steel feed rollers up to top head, 2" x 2" Polyurethane feed rollers after top head, All feed & pressure rollers move with rise & fall of feed beam. -- 2 M (78.74") L Infeed straightening table. -- Manual bed lubrication. -- Sound enclosure.

WADKIN "GA-220" 5-Head Feed Through MoulderSpecifications: -- 5-Head, with 8-5/8" x 4-5/8" cutting capacity (220 mm x 120 mm) -- 40 mm Spindle diameter with cutterhead speed of 6,000 RPM. -- Head sequence: Bottom 10 HP, Right 7-1/2 HP, Left 7-1/2 HP, Top 15 HP, Bottom 10 HP motor. -- 2 HP variable feed speed 19 to 72 FPM, chain drive. -- Currently wired for 460 Volt, 3-Phase power.

WADKIN JTA Disc & Bobbin SanderCombination machine with Disc Sander & Vertical Spindle Sander mounted on a common base.Disc Sander Specifications: -- 30" Dia. cast aluminum disc, 4 HP motor, slotted steel side table 38-1/2" x 15", tilts 10° up and 45° down, move in-and-out & up-and-down by hand wheels. -- Equipped with: Magnetic controls, dust outlet and large hand wheels for easy adjustments on worm & rack.Vertical Spindle Sander Specifications: -- Heavy Duty 1-1/2 HP - 1,725 RPM oscillating spindle, 1-1/2" oscillation travel, (75) oscil./Min, mounted on large trunnions and integrated into a 24" x 24" cast iron table, table tilts 30° down & 10° up, 39" working height. -- Oscillation by Heavy Duty worm & gear mechanism.Equipped with: Precision ball bearing for quill, hand wheel table adjustment.

WADKIN - NV 300, ...Profile GrinderSpecifications: --Working dimensions: 12-3/8" Max. arbor capacity. --Cutting circle 13-3/4" max. and 2-3/4" min. dia. --Grinding motor: 2 HP Motor, 3,600 RPM grinding wheel speed. -- 1-1/2" Max. profile depth. -- 9" Max. grinding wheel diameter.Equipped with & Features: --: 0.02 HP Coolant system pump motor. -- 8-Gal. removable coolant tank with block magnet. --Top & Bottom coolant flow control. -- Infinitely variable head tilt mechanism 0° - 15° max. -- Linear action carriage. --Clearance angle scale. -- Adjustable arm rest and twin coolant pipes to profile wheel.

16' x 10" Wide Vibrating Conveyor with 10" wide pan; 1/2" stroke at 585 RPM, feeds at approx. 25 FPM.

WEEKE BHX 050 CNC MACHINING CENTER (VERTICAL): -- Specifications: Flexible "Vertical" Machining Center that uses less than 5 sq/m of valuable floor space, in addition to an innovative Panel Handling System. -- Working Cap.:Max. workable part size for "X" axis is 98.4" (2,500 mm); "Y" axis 33.4" (850 mm); max. part thickness 2.4" (60 mm).Min. worktable part size for "X" axis is 7.8" (200 mm); "Y" axis 2.7" (70 mm); min. part thickness of 0.47" (12 mm). - Automatic infeed & outfeed from the LH or RH side. -- Positioning Speed:The "BHX 050" can reach movement speeds of 164 FPM (50 MPM) in "X" & "Y" axes & 50 FPM (15 MPM) in "Z" axis with total safety, providing an unmatched working capacity. -- Boring Unit:(1) 3 HP (2.3 kW), Variable speed from 1,500 - 7,500 RPM motor, (8) independent vertical spindles with: (4) spindles in "X" axis & (4) spindles in "Y" axis.(3) Horizontal Spindles with (1+1) in "X axis & (1) spindle in "Y" axis.Boring block has QUICK-CHANGE spindle system. -- Operator & Machine Control:WEEKE "POWER CONTROL" + Windows + WoodWOP 6.0 + Operating System; "IntelCore 2 DUO" Processor.17" TFT Monitor; international keyboard, soft touch keypad & industrial mouse; RS-232 serial ports, USB ports; (1) 1.44 MB floppy disk drive, (1) CD RW drive, modem, Ethernet connection.Real-time multitask processing; programs can be transferred via diskette or downloading by wire is possible. -- Complete with:Pneumatic part clamping devices; sound enclosure and complete set of safety devices. -- Options Include:&#9679 (1) "X" Axis grooving saw; 9,000 RPM, saw blade dia. 100 mm. &#9679 (1) 7 HP (5 kW) Electro-spindle router with hydraulic "QUICK-CHANGE" tool system & "ETP 25" tool holders; variable speed from 6,000 - 18,000 RPM. -- Actual Model is WEEKE BHX 050.

WEEKE BHX 050 CNC MACHINING CENTER (VERTICAL): -- Specifications: Flexible "Vertical" Machining Center that uses less than 5 sq/m of valuable floor space, in addition to an innovative Panel Handling System. -- Working Cap.:Max. workable part size for "X" axis is 98.4" (2,500 mm); "Y" axis 33.4" (850 mm); max. part thickness 2.4" (60 mm).Min. worktable part size for "X" axis is 7.8" (200 mm); "Y" axis 2.7" (70 mm); min. part thickness of 0.47" (12 mm). - Automatic infeed & outfeed from the LH or RH side. -- Positioning Speed:The "BHX 050" can reach movement speeds of 164 FPM (50 MPM) in "X" & "Y" axes & 50 FPM (15 MPM) in "Z" axis with total safety, providing an unmatched working capacity. -- Boring Unit:(1) 3 HP (2.3 kW), Variable speed from 1,500 - 7,500 RPM motor, (6) independent spindles with: (4) spindles in "X" axis & (2) spindles in "Y" axis.Boring block has QUICK-CHANGE spindle system. -- Operator & Machine Control:WEEKE "POWER CONTROL" + Windows + WoodWOP 5.0 + Operating System; "IntelCore 2 DUO" Processor.17" TFT Monitor; international keyboard, soft touch keypad & industrial mouse; RS-232 serial ports, USB ports; (1) 1.44 MB floppy disk drive, (1) CD RW drive, modem, Ethernet connection.Real-time multitask processing; programs can be transferred via diskette or downloading by wire is possible. -- Complete with:Pneumatic part clamping devices; sound enclosure and complete set of safety devices. -- Options Include:&#9679 Max. workable part size for "X" axis is 120" (3,050 mm. &#9679 (1) "X" Axis grooving saw; 9,000 RPM, saw blade dia. 100 mm. &#9679 (1) 7 HP (5 kW) Electrospindle router with hydraulic "QUICK-CHANGE" tool system & "ETP 25" tool holders; variable speed from 6,000 - 18,000 RPM. -- Actual Model is WEEKE - BHX 050.

WEEKE BHX 050 CNC MACHINING CENTER (VERTICAL): -- Specifications: Flexible "Vertical" Machining Center that uses less than 5 sq/m of valuable floor space, in addition to an innovative Panel Handling System. -- Working Cap.:Max. workable part size for "X" axis is 98.4" (2,500 mm); "Y" axis 33.4" (850 mm); max. part thickness 2.4" (60 mm).Min. worktable part size for "X" axis is 7.8" (200 mm); "Y" axis 2.7" (70 mm); min. part thickness of 0.47" (12 mm). - Automatic infeed & outfeed from the LH or RH side. -- Positioning Speed:The "BHX 050" can reach movement speeds of 164 FPM (50 MPM) in "X" & "Y" axes & 50 FPM (15 MPM) in "Z" axis with total safety, providing an unmatched working capacity. -- Boring Unit:(1) 3 HP (2.3 kW), Variable speed from 1,500 - 7,500 RPM motor, (8) independent vertical spindles with: (4) spindles in "X" axis & (4) spindles in "Y" axis.(3) Horizontal Spindles with (1+1) in "X axis & (1) spindle in "Y" axis.Boring block has QUICK-CHANGE spindle system. -- Operator & Machine Control:WEEKE "POWER CONTROL" + Windows + WoodWOP 6.0 + Operating System; "IntelCore 2 DUO" Processor.17" TFT Monitor; international keyboard, soft touch keypad & industrial mouse; RS-232 serial ports, USB ports; (1) 1.44 MB floppy disk drive, (1) CD RW drive, modem, Ethernet connection.Real-time multitask processing; programs can be transferred via diskette or downloading by wire is possible. -- Complete with:Pneumatic part clamping devices; sound enclosure and complete set of safety devices. -- Options Include:&#9679 (1) "X" Axis grooving saw; 9,000 RPM, saw blade dia. 100 mm.&#9679 (1) 7 HP (5 kW) Electro-spindle router with hydraulic "QUICK-CHANGE" tool system & "ETP 25" tool holders; variable speed from 6,000 - 18,000 RPM. -- Actual Model is WEEKE BHX 050.

WEEKE BHX 055 CNC MACHINING CENTER (VERTICAL W/ATC): -- Specifications: Flexible "Vertical" Machining Center that uses less than 5 sq/m of valuable floor space in addition to an innovative panel handling system. -- Working Cap.:Max. workable part size for X-axis is 120" (3,050 mm); Y-axis 33.4" (850 mm), max. part thickness 2.4" (60 mm).Min. worktable part size for X-axis is 7.8" (200 mm); Y-axis 2.7" (70 mm); min. part thickness of 0.47" (12 mm). - Automatic infeed & outfeed from the LH or RH side. -- Positioning Speed:The "BHX 055" can reach movement speeds of 164 FPM (50 MPM) in X- & Y-axis & 50 FPM (15 MPM) in Z-axis with total safety, providing an unmatched working capacity. -- Boring Unit:(1) 3 HP (2.3 kW) Variable speed from 1,500 - 7,500 RPM motor; (13) independent spindles with: (8) Spindles in "X" axis & (5) spindles in "Y" axis.(6) Horizontal spindles with: (2 + 2) in X-Axis & (1 + 1) in Y-axis.Boring block with "Quick Change" vertical spindle system. -- Operator & Machine Control:WEEKE "Power Control PC 85" + Windows + WoodWOP 6.0 Operating System; Intel Core "2 DUO" Processor.17" TFT Monitor; international keyboard, soft touch keypad & industrial mouse; RS-232 serial ports, USB ports; (1) 1.44 MB floppy disk drive, (1) CD RW drive, modem, Ethernet connection.Real-time multitask processing; programs can be transferred via diskette or downloading by wire is possible. -- Complete with:Pneumatic part clamping devices; sound enclosure and complete set of safety devices. -- Options Include:(1) 10 HP (7.5 kW) Air-cooled electro-spindle router with HSK F63 adaptor, variable speed from 6,000 - 18,000 RPM.(1) 4-Position ATC too rack mounted on the machine cabinet side.(1) "X" Axis grooving saw; 9,000 RPM, max. saw blade dia. 100 mm.

WEEKE BHX 200-25 OPTIMAT CNC MACHINING CENTER (VERTICAL): + PANEL RETURN SYSTEM + CLAMEX-P PROCESSING: -- Specifications: Flexible "Vertical" Machining Center that uses less than 10 sq/m of valuable floor space in addition to an innovative Panel Handling System. -- Working Cap.:Max. workable part size for "X" axis is 120" (3,050 mm); "Y" axis 49.2" (1,250 mm) max. part thickness 3.1" (80 mm).Min. worktable part size for "X" axis is 13.8" (350 mm); "Y" axis 2.36" (60 mm); min. part thickness of 0.31" (8 mm) automatic infeed & outfeed. -- Positioning Speed:The BHX 200 can reach movement speeds of 164 FPM (50 MPM) in "X" & "Y" axes & 50 FPM (15 MPM) in "Z" axis with total safety; provides an unmatched working capacity. -- Boring Unit:(1) 3 HP (2.3 kW) Motor, variable speed from 1,500 - 7,500 RPM; (15) independent spindles with: (9) Spindles in "X" axis & (6) spindles in "Y" axis.(10) Horizontal spindles with: (3 + 3) in "X" axis & (2 + 2) in "Y" axis; boring block has "QUICK CHANGE" spindle system. -- Operator & Machine Control:WEEKE "POWERTOUCH" + Windows "7"+ WoodWOP Operating System; "i5" Processor.21.5" HD multitouch Wide Screen Display Monitor; soft-touch keypad & USB connection; Digital Field Bus System; RS-232 Serial ports, Ethernet connection.Real-time multitask processing; programs can be transferred via USB or downloading by wire is possible. -- Complete with:Pneumatic part clamping devices; sound enclosure; complete set of safety devices. -- Options Include:(1) NC Controlled 0° - 90° "X/Y" Grooving Saw for max. 125 mm dia. x 5 mm thick blade.(1) 13.4 HP (10 kW) Air-Cooled electrospindle router with HSK F3 adaptor; variable speed from 1,500 - 24,000 RPM.(1) 4-Position ATC tool rack mounted on the side of the machine base.(1) "CLAMEX-P Connecting Hardware Processing System; ...watch the Literature Video @ 3:45!(1) NC Controlled Panel Return System; ...watch the Literature Video @ 4:30! -- Actual Model is: WEEKE - BHX 200-25 OPTIMAT

WEEKE BP 80 CNC MACHINING CENTER: -- Specifications: X-Axis 122.6 (3,105 mm); Y-axis 40.3" (1,020 mm); Z-axis stroke is 5.3" (135 mm); max. material thickness 3.9" (100 mm). -- Positioning Speed:X-Axis is 213 FPM ((65 MPM); Y-axis 164 FPM ((50 MPM) & Z-axis is 49 FPM (15 MPM); head travels on THK linear ways on all axes. -- Worktable:(6) Movable support rails with: (2) Square matrix vacuum cups ea.; (6) pneumatic backstops & (2) pneumatic side stops creating (2) working zones. -- Boring Unit:2 HP (1.5 kW) Motor; (11) independent vertical spindles: (6) in X-Axis & (5) in Y-axis; (6) horizontal spindles with (1 + 1) in X-axis & (1 + 1) in Y-axis; (1) X-axis grooving saw with 100 mm dia. blade. -- Machining:(2) 7.5 HP (5.6 kW) High speed routers with: "Hydro-Grip" Spindle & EPT 25 adaptors, 6,000 - 18,000 RPM; controlled by frequency inverter. (One of the router spindles is not operational & needs rebuilding.) -- Operator & Machine Control:PC Front-End with: HOMATIC + Windows + WoodWOP 4.0 Operating System; NUM PLC for (3) axes; linear, circular & helical interpolation;15" monitor; keyboard for data entry; floppy disk drive; 40 MB hard drive,;32-bit processors; RS-232 port for possible connection to office PC; all mounted in separate free-standing control cabinet. -- Complete with:(1) 40 cbm/Hr Vacuum Pump; safety mats. -- Actual model is: WEEKE - BP 80

WEEKE VENTURE 05S CNC MACHINING CENTER: -- Specifications: Working Field "X" Axis is 2,510 mm (98.8"); "Y" axis is 1,250 mm (49.2"); "Z" axis stroke is 125 mm (4.9"); max. material thickness 85 mm (3.3"). -- Positioning Speed:"X" Axis 262 FPM (80 MPM); "Y" axis 262 FPM (80 MPM); "Z" axis 66 FPM (20 MPM); head travels on THK linear motion guides on all axes. -- Worktable:(6) Adjustable K-Table tubeless support rails with (2) vacuum pods per rail.(6) Pneumatic backstops; (6) pneumatic front stops; (2) pneumatic side stops; (2) working zones. -- Boring Unit:3.6 HP (2.7 kW) Motor; programmable variable speed 1,500 - 7,500 RPM; (8) independent Vertical drill spindles, (4) spindles in "X" axis & (4) in "Y" axis;(6) Horizontal spindles with (2 + 2) in "X" axis & (1 + 1) in "Y" axis; (1) "X" axis grooving saw with a 100 mm dia. saw blade. -- Machining:(1) 8 HP (6 kW) Electro spindle router with ETP 25 "Hydro-Chuck" QC adaptor, powered by a frequency inverter w/programmable 1,250 - 18,000 RPM; RH/LH rotation. -- Operator & Machine Control:WEEKE PC 85T "POWER CONTROL" + Windows "XP" + WoodWOP 5.0 Operating System; BECKHOFF PLC for (3) axes with linear, circular & helical interpolation.15" TFT monitor, industrial keyboard for data entry, CD R/W & floppy drive; 40 GB hard drive; modem, USB slot, RS-232 serial interface for possible simple PC connection; all mounted in separate free-standing Control Panel. -- Complete with:(1) 100 cbm/Hr Vacuum Pump, Scrap Conveyor, Handheld Pendant & Safety Fences. -- Actual Model is WEEKE - VENTURE 05S.

WEEKE VENTURE 106M (BMG 111) CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Working Capacity: "X" Axis is 123.2" (3,130 mm); "Y" axis is 61.2" (1,554 mm); "Z" axis stroke is 7.2" (185 mm); max. material thickness 4" (100 mm). -- Positioning Speed: "X" & "Y" Axis travel speed of 262 FPM (80 MPM); "Z" axis travel speed of 66 FPM (20 MPM).The machine head travels on THK linear motion guides on all axes. -- Worktable:(6) Movable K-Table support rails w/side mounted raise-and-lower panel feeding rails; (2) vacuum pods per rail.(6) Pneumatic backstops; (2) pneumatic side stops create (2) working zones.Laser Positing System setup assistance for precise rail & vacuum pod positioning. -- Boring Unit:3 HP (2.3 kW) Motor; variable speed from 1,500 - 7,500 RPM; (12) vertical "QUICK-CHANGE" drill spindles: (7) Spindles in "X" axis & (5) in "Y" axis.(6) Horizontal spindles with: (2 + 2) in "X" axis & (1 + 1) in "Y" axis. -- Machining: (1) 10/12 HP (7.5/9 kW) Air-Cooled electro-spindle router with: HSK F63 Adaptor w/programmable 1,250 - 24,000 RPM; constant torque from 9,000 - 24,000 RPM; RH or LH rotation; powered by a frequency inverter.(1) 8-Position ATC magazine located at the RH side of the machine. -- Operator & Machine Control: WEEKE IPC "PC 85 Power Control" + Windows "XP" + WoodWOP 6.1 Operating System; INTEL Core2 Duo Processor; "BECKOFF" PLC for (3) axes with linear, circular, & helical interpolation.17" TFT Monitor with: 2D / 3D "REAL-TIME" graphics, industrial keyboard, & mouse for data entry.1 SATA hard drive, 160 GB; central USB front side bus connection, Ethernet connection 10/100 Mbit. All mounted in separate free-standing Control Panel. -- Complete with:(1) 84 M³/Hr Vacuum Pump, 3-zone safety mats (will stop machine if operator enters the active work area), safety fences, scrap conveyor, handheld pendant controller. -- Actual Model is: WEEKE VENTURE 106M / BMG 111.

WEEKE VENTURE 2.5 CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Working Field "X" Axis is 3,250 mm (128"); "Y" axis is 1,250 mm (49.2"); "Z" axis stroke is 125 mm (4.9"); max. material thickness 100 mm (3.9"). -- Positioning Speed:"X" & "Y" Axis 328 FPM (100 MPM), "Y" axis 262 FPM (80 MPM), "Z" axis 66 FPM (20 MPM); head travels on THK linear motion guides on all axes. -- Worktable:(6) Adjustable K-Table tubeless support rails with (2) vacuum pods per rail.(6) Pneumatic backstops, (6) pneumatic front stops, (2) pneumatic side stops; (2) working zones. -- Boring Unit:3.6 HP (2.7 kW) motor; programmable variable speed 1,500 - 7,500 RPM; (12) independent "Quick Change" Vertical drill spindles: (8) spindles in "X" axis & (4) in "Y" axis.(6) Horizontal spindles with (2 + 2) in "X" axis & (1 + 1) in "Y" axis.(1) 0° - 90° NC Controlled "C" Axis Grooving Saw for 360° Horizontal Processing; 100 mm max. dia. saw blade. -- Machining:(1) 9 HP (6.7 kW) Electrospindle router with: HSK F-63 Adaptor, powered by a frequency inverter w/programmable 1,250 - 18,000 RPM, RH/LH rotation.(1) 7-Position ATC Tool Plate mounted on the machine head for "on the fly" ATC. -- Operator & Machine Control:WEEKE PC 85T "POWER CONTROL" + Windows "XP" + WoodWOP 5.0 Operating System; BECKHOFF PLC for (3) axes with linear, circular, & helical interpolation.15" TFT monitor, industrial keyboard for data entry, CD R/W & floppy drive, 40 GB hard drive, modem, USB slot, RS-232 serial interface for possible simple PC connection; all mounted in separate freestanding Control Panel. -- Complete with: (1) 100 CBM/Hr Vacuum Pump, scrap conveyor, handheld pendant & safety fences. -- Actual Model is WEEKE VENTURE 2.5

WEIMA C 150 Briquette PressSpecifications & Features: -- Produces 2" (50 mm) dia. Briquettes; -- Hopper opening of 41" x 41" (1,040 x 1,040 mm); hopper volume 1.43 cu/yd (1.1 cbm). Equipped with: -- 9 HP Hydraulic motor; 0.75 HP auger motor; hydraulic oil volume of 26.4 gallons (100 liters). -- Vertical hydraulic ram compacts the material in the extrusion chamber to produce uniform material; extrusion chamber is continually filled via rotary screw type auger. -- Volume reduction from chip/dust to block up to 10:1 ratio at 2,600 PSI; hourly output up to 80 - 120 Lbs/Hr ("quoted output is an average and can be influenced by density, material size, screen size, feeding form, and other factors").Features: -- Briquette length control, chrome plated clamp, oil level switch, control panel side-mounted to hopper, and overheating protection for hydraulic oil. Solid German engineering. - Freight, start-up, discharge pipes, etc. not included.