MARATHON - AT-603042-730, ...Auto-Tie Horizontal BalerSpecifications: -- Feed opening: 60" x 30" -- Motor: 30 HP -- Cylinder: 7" -- Loaded on your Truck

MARATHON - RJ-575HD, ...Converted to DC-5 Transfer CompactorSpecifications: -- (2) Cylinders: 7" -- Feed opening: 96" x 60" -- Steel belt conveyor width: 60" -- Cleats: 4" -- Main motor: 30 HPFeatures: -- Hydraulic trailer hookup -- Support stand

MARATHON - AT-503042-850, ... Auto-Tie Horizontal Baler -- Motor: 50 HP -- Cylinder: 8" -- Bale Size: 30" x 42" x 72" -- Max. Bale Weight: 1,500 Lbs -- NOTE: Owner Used it (200) Hours since a COMPLETE Rebuild in 2015 -- Loaded on your Truck

MARATHON GALAXY 2R9-190-70N 2 RAM BALER -- 50 HP Motor -- 9" Main Ram -- 6" Eject Cylinder -- 190,900 Lbs Ram Force -- 70" x 40" Feed Opening -- 90% Liners -- Runs Great, Just Came out of Facility -- Conveyor not Included -- Loaded on your Truck

MARATHON GALAXY - 2R-450-102-W-D. ...Horizontal Baler -- Ram Type: 2 -- Motors: (2) 100 HP -- Actual Hours: 4,500 -- Main Cylinder: 12" -- Ram Face Pressure: 298 PSI -- Charge Opening: 57" x 102" -- Steel Belt Feed Conveyor -- Loaded onto your Truck

MARATHON 2R-150-70 2-Ram Horizontal Baler -- 30 HP Motor. -- Main Ram: 8". -- Eject Cylinder: 6". -- Feed Opening: 40" x 70". -- Bale Size: 65" x 45" x 30". -- Wire Tier: Accent 470. -- Loaded onto your Truck.

MARATHON - Gemini Xtreme, ...Horizontal Closed Door Baler (Full Pen) With Infeed Conveyor Specifications: -- Bale size: 30" x 48" x 60" -- Charge box: 35" x 60" -- Cylinder: Dual 6" -- Main motor: 20 HPEquipped with: -- Infeed Conveyor: 48" -- Horizontal Conveyor: 48" -- Cart tipper -- Safety cage

MARATHON ATLAS ET "NON-FERROUS" HORIZONTAL BALER -- 50 HP motor -- Full Penetration & Full Eject -- Opening: 45" x 60" -- 10" Cylinder -- Loaded on your truck

MARATHON V-6030HD VERTICAL BALER -- 60" Vertical Baler -- 10 HP Motor -- 6" Cylinder -- Bale size 60" x 30" -- Loaded on your truck

MAREN PRO-PAK 60 Horizontal Closed Door Baler -- Motor: 20 HP -- Feed Opening: 54" x 40" -- Touchscreen -- Shear Blade: 4-Sided -- Platen force: 187,000 Lbs -- Bale size: 60" W x 30" H x variable length, programmable -- Hopper: Large feed -- Loaded onto your Truck

MAREN 72OE-76 Auto-Tie Horizontal Baler -- Motor: 30 HP. -- Cylinder: 6". -- Feed Opening: 29" x 27". -- Oil Cooler. -- PLC: "Micrologix 1200". -- Includes: Spare Parts, New Cylinder and Manifold. -- Loaded onto your Truck.

(5) MARAEN - 203, ...Automatic Tie Horizontal BalersLot of (5) Balers -- Model: 203-325-102 (40 HP) -- Model: 203-325-102 (40HP) -- Model: 203-325-102 (40 HP) -- Model: 203-103 (60 HP) -- Model: 203-103 (75 HP) -- Cylinder: 8" -- Bale size: 30" x 36" (variable) -- Loaded onto your truck

MAREN - 72, ...Auto-Tie Horizontal Baler w/Infeed ConveyorSpecifications: -- Cylinder: 6". -- Bale size: 30" x 38" x Variable. -- Feed opening: 29" x 27". -- Power unit: 20 HP. -- Tensioner cylinder: 3" x 12". -- Cycle time: 20 Sec. -- Operating pressure: 2,700 PSI. -- Conveyor: 48" Infeed included.Applications: -- Shredded corrugated, folding carton stock, and coated stock. -- Molded fiber products. -- Shredded paper. -- Textile. -- Foam. -- Aluminum cans (UBC). -- Steel Cans.

MAREN - 72-OE-76, ...Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 6" -- Bale size: 30" x 38" x Variable -- Feed opening: 29" x 27" -- Power unit: 30 HP -- Tensioner cylinder: 3" x 12" -- Ram thrust: 78; 340 Lbs -- Cycle time: 20 Sec -- Operating pressure: 2,700 PSI

Maren Wide Body AT Baler SWSS-A-8-AT-30R Horizontal Closed Door Baler --Mfg: 2017 --30 HP / 575 Volt --8" Cylinder --60" x 45" Feed Opening --45"W x 30"H x Variable Length --Shear Blade --Air Oil Cooler --10' L Bale out Table --Extention Hopper

MARINUS Powermax 300 HD End Matcher With Defecting, Cut to Length & Optimizing Cut-Off CapabilitiesFeatures & Specifications: -- Heavy and stable construction -- Cutterhead Carriage and Clamp System utilizes HD Lineal Bearings – grease lubricated. -- Heavy Duty – low maintenance Feed Chains Into machine and takeaway of material after cutting/ end matching. -- Continuous high-speed feeding system with accurate positioning utilizing HD Servo Drives. -- 2 Servomotors for maximum feed control and acceleration and deceleration control -- Servo-driven feed motor & gearbox for highest efficiency speed feeding and control of the cutterhead carriage includes independent step-less speed control forward & reverse. -- Pneumatic side pushers (holding material firmly against the fence) for guaranteed square angle cut. -- 2 Cut-off sawing servo motors: 5 HP each (3,0 kW) – 450 mm (17.7”) dia. blades with inverters (VDFs) for varying blade speed -- 2 High-speed milling head servo motors with inverter (VFD) (12HP - 7,5 kW each) with speeds to 12,000 RPM - 5” (125 mm) dia. -- Adjustable cutterhead stroke based on material width to increase throughput speed based on the width of material input. -- 1 Luminescence-Sensor camera for defect crayon mark -- Inductive-Sensors – for detecting the position of the carriage and the others for detecting the positions of the saw blades. -- Cutoff waste powered belt conveyor in machine (below feed system- 12” from floor) with drive motor for waste cutoff pieces taken to the outfeed end of the machine. Other Technical Specification: -- Machine is completely enclosed by safety doors. -- Machine is produced to CE Safety and Electrical Standards to UL/CSA Standards -- Lenze PLC Control -- Operation from operator’s control with touch screen control – mounted on the front right cover of the machine. -- Air pressure required – 85 PSI (6 Bare) -- 1x 8” (200 mm) & 2 x 4.75” (120 mm) dia dust outlets with approx. 5,000 to 5,500 mm and from 3050 to 3350 CFM -- Router Remote Access – with an internet connection, factory can monitor the performance of your machine. Also allows for easy access to service and softwareupdates and downloadsInput & Output Material Specifications -- Board Widths: 2”(50mm) Min. to 12.28”(312mm) Max. Min width 1.75” (44.5 mm) min. -- Board Input Lengths: 17.9” (450 mm) Min. to 20 ft.(6000mm) Max. -- Board Output Lengths: 15.9” (400 mm) Min. -- An available short-piece option can be added to reduce output. length to 10” (250mm) Min -- Board Widths: 2”(50 mm) min. to 12.28”(312 mm) max. -- Board Input Lengths: 17.9” (450 mm) Min. to 20 ft. (6000 mm) Max. -- Board Thickness:4” (10 mm) Min. - (to 0.315” (8 mm) on request) (to 2” (50 mm)Standard Programs / Programming -- The machine is equipped with 2 Primary Programs: -- 1. Endmatching – includes trimming ends

MARCUS TRANSFORMER 15 KVA, 3-Ph, Auto, 600/480 V Transformer with tap for 440 V.15 KVA Auto-ventilated "dry type" transformer 600 V in (primary); 480 V out (secondary) with tap on secondary for 440V at full capacity. -- Manufactured with grain oriented silicon steel is used. -- Coil windings with high quality magnet wire and the enclosure is made of heavy gauge steel w/ventilation openings. -- UL and CSA approved.

MARUNAKA Model RD – 8J WIDE Single Deck Veneer Roll Dryer;Complete with the following features: -- 1988 - year of manufacture. --Working width – 51” --Length of the dryer – 24 Ft (4 Sections) --Type of heating - Steam --Operational in 2018 when mill closed --Professional rigging and loading available.

MARUNAKA Model RD-3UB/RD-6UB (Connected) Single Deck Veneer Roll Dryer;Complete with the following features: -- (3) 3 HP circulating fans with (1) 3 HP exhaust blower thru the ceiling. -- Optional heat source: electric (7) Elements/Zones, computer controlled thermocouples in addition to (2) Natural gas burners (OEM). -- Capable of temperatures to 120° Celsius (250° Fahrenheit). -- Working width 1000 mm or about 39 inches. Veneer is fed endo.Please Note: -- Dryer is (2) separate units; all equipment will fit into a 40' container for shipment from Eastern USA. -- All equipment is in good working condition including all fans and blower, temperature control works properly; feed roll drive works well. -- Rolls have been nickel treated to minimize corrosion/oxidation. -- This dryer equipment is still in place. -- MARUNAKA (2) Models: RD-3UB and RD-6UB currently connected to increase capacity. Can easily be separated.NOTE: Refurbished in 2005, operated from 2005 - 2012. Still operational ready to work!

MASTERWOOD PROJECT 313 CNC MACHINING CENTER (W/ACT/BORING): -- Specifications:Working Capacity:"X" Axis 3,080 mm (121"), "Y" axis 1,100 mm (43") width; -- Positioning Speed:Programming speed in X-axis 197 FPM (60 MPM), Y-axis 162 FPM (49 MPM), Z-axis 58 FPM (18 MPM). -- Boring unit:(13) independent vertical spindles, (9) in X-axis, (5) in Y-axis; (4) horizontal spindles with (1 + 1) in X-axis for edge boring in the left- & right-hand panel edges. -- Machining:(1) 7.5 HP (5.6 kW) high speed router (1,000 - 24,000 RPM) by frequency inverter; 1.5 HP (1.1 kW), 6,000 RPM grooving saw with manual rotation for X-axis or Y-axis; -- Work Table: (6) moveable support rails with (2) vacuum cups ea., double zero settings, (6) pneumatic backstops and (2) pneumatic side stops creating (2) working zones. -- Operator & Machine Control:TECNOSUD "K68800" Microprocessor control for (3) axis, lineal, circular, and helical interpolation. Equipped with 14" color video graphic monitor, keyboard for data entry, 1.44 MB floppy disk drive, 64K RAM, RS-232 for possible connection to office PC, all mounted in separate free-standing control cabinet; features to run CPL/Parametric "TRIG" programming and "Spline" CAD/CAM. -- Complete with: Dual zone vacuum pump. Ontario Hydro approved electrics. -- Actual Model is MASTERWOOD PROJECT 313