GRECON PJ 150/500 and PF 10-610 Finger Jointer and PressFinger jointer and Press systemSpecifications: -- Grecon Finger Joint System Including: Model PJ 150/500 Shaper -- Trim Saw 5 HP -- Shaper Head 30 HP -- Glue Application Head -- Timber Width 30 mm - 159 mm (1.2" - 6.25") -- Timber Thickness 12 mm - 80 mm (.5" - 3.15") -- Timber Length 250 mm - 1780 mm (9.84" - 70") -- Infeed Belt Conveyor 20" Wide X 34" LongAfter the Finger joint shaper: -- Manual Roll Conveyor with Rotation for Turning Workpieces 22" X 68" -- Outfeed Belt Conveyor 20" X 39" -- Driven Roll Conveyor 20" X 120" -- Powered Belt Conveyor Prior to Press 7" X 86"Model Press PJ 10/6100 Finger Joint Assembly Press: -- Maximum Pressing Length 240" -- Cut-Off Saw Motor 3HPNote: The machine will be reconditioned upon placement of order.

GREEN - 60" X 27', ...Steel Belt Type ConveyorSteel Belt Feed Conveyor -- Width: 60" -- Length: 27 Feet -- Lower Horizontal: 10-1/2 Feet -- Drop Off: 10 Feet -- Working: Fine -- Loaded onto your Truck

GREENMAX - EPS-AC-100, ...Cold Press DensifierSpecifications: -- EPS Polystyrene Foam Densifier -- Ratio: 50 to 1 -- Volume: 220 Lbs/Hr -- No Conveyor -- Loaded ont your Truck

GREENMAX C100 SCREW COMPACTOR with Infeed ConveyorSpecifications: •Screw compression technology, Lower utility consumption, and higher efficiency•Able to deal with fish boxes that contain water•CE approved and comply with UL/CSA standards•A speed control device is designed to prevent EPS from melting•Reputable & High-quality components make the machine reliable and durable•SIEMENS control system guarantees easy and simple operation. --Capacity 220lbs/hr

GRIGGIO G 1100 Wide belt Sander2-Head, 1,100 mm (43") width cap. -- 1st Head: Rubber covered steel contact roll, duro 85, 220 mm diameter . -- 2nd Head: Rubber covered contact roll duro 50 -- 25 HP motor to drive both head. -- 43" x 85" abrasive belts, electropneumatic abrasive belt tracking, -- Conveyor belt feed, two speed from control panel at 15 and 30 FPM, 0.4/0.7 HP feed drive, automatic conveyor belt tracking, -- 1/8" - 6-1/2" motorized thickness adjustment with LED readout & 0.75Hp gearmotor drive. --Automatic positioning of the working table, rubber covered spring loaded pressure rollers, double infeed and outfeed rubber covered rolls, infeed panel "over-thickness" sensor. --Two suction dust hoods dia. 6" (150mm),

GRIGGIO SC 1500 Table Saw Specifications: -- 60" Cut cap.; 5 HP main motor & scoring motor with 3/4" dia. arbor and 9,000 RPM blade speed; external scoring blade adjustment. -- Features: -- 0° - 45° Tilting 1" dia. main saw arbor, 16" max. blade size, 5.1" max. depth of cut, single blade speed. -- Rip-cut fence assembly adjustable to 60" max.NOTE: Dimensions and weight are approximate.

GRIGGIO - "GT-4", Single End Tenoner4-Head Tenoner with: Sliding Table & Holddown. -- 1st Head: Trim saw, 10" dia. -- 2nd/3rd Head: Top & bottom tenon heads; 6.6 HP motor belt drives saw & tenons; 4" max. tenon length and 3/16" - 2-1/8" thickness. -- 4th Head: Cope head; 4.6 HP motor; 9-7/8" - 11-7/8" max. cope cutting circle; 3-15/16" max. tool length. -- Equipped with: 15" Long x 6" wide sliding table, travels 63" & tilts 0° - 30°; overhead holddown with tilting fence line. Also Included: -- Cutterhead for top/bottom tenon. -- Cutterhead for coping.

GRIZZLY G4185 2-Spindle Horizontal Boring Machine, Will Accept 3-Spindle Boring HeadSpecifications: -- Max. stock width 7-1/2”. -- Table size 9-3/4” x 15-3/4”, Max. table height 35”, Table height adjustment 3-1/2”. -- Max. bit cap. 9/16” (Right-hand threaded), Spindle travel adjustment 3”, Spindle speed 4,000 RPM, Max. speed 12 SPM at 90 PSI. -- Hold-down force 600 Lbs.Equipped with: -- 2 HP 3,450 RPM TEFC Direct drive motor. -- Pneumatic spindle travel. -- 2-1/4” Pneumatic hold-down. -- Pneumatic foot pedal control. -- Steel stand.Complete with: -- GRIZZLY "G5952” 2C-W19” 2-Spindle Boring Head, Max. bit cap. 5/8”, Bit threads 7/16 - 14 TPI Right-hand, Spindle speed 4,000 RPM.

GRIZZLY G0564 Oscillating Edge SanderSpecifications: 6" Wide x 108" long belt with 3/4 oscillation stroke, 3 HP motor (1725 RPM motor with 3150 FPM belt speed), 220V single-phase. -- 35 3/8" x 12" Cast iron table, 7" non-oscillating spindle accepts 1-1/2" to 4-1/2" long drums. -- Features (2) 4" dust ports, weight 496 Lbs.

3/4 HP Single Shaper with Team B&B Tiltrod Shaping Gig!Precision-ground cast iron table, independently adjustable fence halves, Push button ON/OFF switch.Includes: Miter gauge and starting pins, Cast iron body construction, Pre-formed steel stand, shielded & permanently lubricated spindle bearings, Reversing switch Includes Team B&B Tiltrod Shaping Gig. Features: -- Motor size: 3/4 HP -- Motor Speed: 3450 RPM -- Table size: 15-5/8" x 17-3/4", Working Height: 34-1/4" -- Vertical Spindle travel: 7/8" Spindle speed: 8500 RPM

GRIZZLY G1026 SINGLE SPINDLE SHAPER W/ FEEDER AND MOBILE BASE3 HP -3,450 RPM Motor, 1/2", 3/4" & 1" dia. interchangeable spindles, 2-1/2" spindle cap. under the nut and with 3" spindle travel; (2) spindle speeds of 7,000 or 10,000 RPM, reversing spindle switch. -- Features: 28-1/4" x 21-3/4" table 34" table height.Complete with: Magnetic spindle brake and adjustable fence & 3" dia. dust extraction outlet.INCLUDES: 3-Roll 4-Speed feeder and mobile base !

GRIZZLY H2934 2-HEAD WIDE BELT SANDER2-Head Wide Belt Sander, 36-1/2" width cap. -- Head configuration: - 1st Head: Rubber covered contact drum; 2nd Head: Combination head with rubber covered contact drum and adjustable platen; Abrasive belt size 37" x 60". -- 0" to 6" Thickness cap., LED digital depth encoder; 14" min. board length and 12" infeed conveyor. -- 1st Abrasive belt surface speed of 3,543 SFPM; 2nd abrasives belt surface speed of 2,554 SFPM. -- Conveyor speed from 14 - 60 FPM. -- 20 HP - 50/25 Amp Sanding motor; 1 HP - 3.4/1.7 Amp conveyor motor; 0.25 HP - 1.2/0.6 Amp table lift motor. -- Complete with: Rubber covered holddown rolls, adjustable felt platen, Amp/load meter, and disc brake for emergency stop.

GRIZZLY GO447 37" Dual Head Wide Belt Sander.37" Width cap. Drum, combination HeadHead Configuration1st Head: Contact Drum2nd Head : Combination Head. Rubber covered drive roll and adjustable platen; sanding belt size 37"" x 75"".Specifications -- 6" Thickness cap., LED digital depth encoder; -- 14" min. board length and 12" infeed conveyor. -- Min board thickness 1/4" -- 1st Head Abrasive belt surface speed of 3,543 SFPM; -- 2nd Head abrasives belt surface speed of 2,554 SFPM. -- Conveyor speed from 14 - 60 FPM. -- 20 HP Motor driving both heads -- 1 HP - 3.4/1.7 Amp conveyor motor; 0.25 HP - 1.2/0.6 Amp table lift motor.

15" Width cap. with 1/4" - 8" thickness opening, 1/16" max. depth of cut; 3 HP single-phase motor belt drives 3-knife, 3-15/64" dia. cutterhead at 5,000 RPM; head with high speed steel knives, max. thickness 8", min. 3/16"; dual feed speed of either 16 or 30 FPM; 16" x 42" cast iron table, table extentions on infeed/outfeed. Complete with: Magnetic controls, 2" dia. metal infeed & outfeed rollers, open fabricated steel base, and large hand wheel for cutterhead assembly adjustment.

GRIZZLY G4185 BORING (HORIZONTAL) ---Price Negotiable---Make an Offer!--- 3-Spindle Horizontal Boring Machine, Will Accept 2-Spindle Boring Head - Maximum stock width 7-1/2” - Table size 9-3/4” x 15-3/4”, Maximum table height 35”, Table height adjustment 3-1/2” - Maximum bit capacity 9/16” (Right-hand threaded), Spindle travel adjustment 3”, Spindle speed 4,000 RPM, Maximum speed 12 SPM at 90 PSI - Hold-down force 600 Lbs. - 2 HP 3,450 RPM TEFC Direct drive motor - Pneumatic spindle travel - 2-1/4” Pneumatic hold-down - Pneumatic foot pedal control - Steel stand - Includes: GRIZZLY "G5953/3C-W20" 3-Spindle Boring Head, Maximum bit capacity 15 mm (0.59"), Bit threads 7/16 - 14 TPI Right-hand, Spindle speed 4,000 RPM

GS - HEAVY-DUTY 34 KVA, ...Transformer.SCR Drive Transformer. -- Cat # DT631H34S. -- High voltage 575 Volts Delta; Low voltage 230 Y/133.

GUIDETTI - WIRE 415, ...Copper & Wire Chopper with Pre-Shredder -- Currently Disassembled.Specifications: -- Feed size of material; 1,310 x 2,140 mm. -- Load pusher stroke: 600 mm. -- Rotor diameter: 220 mm. -- Rotor rotation speed: 82 RPM. -- Hydraulic power: 0.75 kW. -- Grid hole diameter: 40 mm. -- Rotating blades: 23 + 4 External. -- Low hours; 2,300 Hrs.GUIDETTI Pre-Shredder New in 2012. -- Model: PM6N 600/200 -- Low hours: 1,700 -- Loaded onto your truck.

HAAS - 2000XL 2.0, ...Mobile ShredderLow Hours; 2018 YMFG.Specifications & Features: -- Can be used at any location (comfortable transport measurements). -- Easy & quick positioning thanks to crawler track and radio remote control. -- Shreds different materials with just (1) tool configuration. -- High throughput capacity of up to 100 tons/Hr. -- Resistant against foreign bodies. -- Low wear cost and long lifetime. -- Service and maintenance friendly. -- No wrappings; self-cleaning. -- Quiet main drive.

Rafix Hinge Boring & Inserting Machine with 1.5 HP motor.Specifications: -- High-quality air cylinder (80 mm bore with 650 ft lbs of pressure @ 90 PSI) rated for 3.5 million 3" strokes. A skilled operator can bore and insert in 3 to 4 seconds. -- Features: Two types of boring depth adjustment: drawbar style for quick and easy adjustment and a solid stop adjustment for the changing of door thickness applications. This allows for changing of the door thickness and still bore the same depth without adjustment! -- Fixed table with adjustable back rail to control the tab location. -- Enclosed cutting area for better chip removal with blow-off nozzle to assist in chip evacuation and adjustable 2" and 4" vacuum hook-up. -- Pneumatic drilling unit with push button control. -- Includes: adjustable cutting speed control, indicator light, reset thermal circuit breaker, emergency stop button, drill and insert buttons (two hand activation for operator safety), rotary switch for pair of pneumatic hold down clamps, 600 mm ruler and (4) flip stops.

HALSTY 136 WIDE BELT SANDER1-Head Sander with 36" width cap. and 6" thickness cap. -- Combination sanding head with 5-1/4" dia. contact roll, 2-1/2" wide polishing platen; 20 HP 3-Ph motor. 37" x 75" Abrasive belt, electronic tracking. -- Variable feed drive for conveyor belt with speeds of 0 - 18 FPM, 2" dia. infeed & outfeed rubber covered holddown rolls. -- 0" - 6" Thickness cap. with motorized adjustment via (4) 1" Acme thread jackscrews.