COMPLETE CHANTLAND 4234 LOOSE BAGGING SYSTEM4234 BELT-WEIGH BAGGER Including the following: -- Load Cell Weighing with "5511" Weighmeter Controller -- Color Touch Screen 5.4" size -- Single or Dual Set Point -- Calibration Routine -- Zero Tracking - Weigh Track -- Multiple Product Set-Up w/Quick Change over- (100) products -- RS-232, RS 422 Ethernet TCP/IP Connection -- NEMA 4X Poly Enclosure 16" x 14" -- Three Level Password Protection -- Requires Dedicated 120V / 60 Cycles service -- Two-Stage Variable Speed Control for Bulk Feed & Dribble Cut off by Weight Using VFD -- Flapper Style product Stop Gate for Positive Product Cut-Off -- Discharge Dust Collection Chute -- Spiked Agitator Above Inlet, with Drive, -- An Agitator Stirs the Product and Helps Deliver Product to the Belt. -- Surge Bin, Mounts to Flange of Packer, with Removable Lid, Inlet Flange and Dust Flange in Lid -- Approximately 10 Cubic Foot Capacity with Threaded Ports for Customer Supplied Bin Level IndicatorsAP100 Automatic Bag Placer -- Bag Face 13-19 Inches -- Bag Length 24 Inches and up to 40 Inches Long -- Material of Bag Construction; Kraft Paper, Poly Plastic, Woven -- Gusseted Bags 5-1/2" Wide Gussets -- Upgrade to VEE Spout Clamp for "AP10000" -- PLASTIC BAG IMPULSE SEALER

CLEEREMAN 36 CIRCULAR LEFT HAND SAWMILL AND CARRIAGE -- Three (3) headblocks with pneumatic dogs and cant kickers -- LEFT HAND, Serial Number 36-669-R99 -- Silvatech computerized setworks with controls in sawyer's cab -- Vertical edger with 50 HP electric motor and two (2) shifting saws -- Ready to ship

CLEMCO CDF-8 Cartridge Dust CollectorSpecifications: -- Holds (16) cartridge filters. -- Includes New AirMax Premium Media Cartridge Filters – fire retardant. -- Total Filter Media Area: 4,032 ft². -- Air-To-Media Ratio @ 8,000 cfm: 2:1. -- Automatic Pulse Clean System with differential pressure gauge and sequencing control in enclosure. -- Single Hopper Outlet with Sealing Drum Cover Kit. -- Steel Support Structure. -- Includes: 20 HP Top Mount, Direct Drive Blower Rated for 8,000 CFM. -- Electrical Motor Starter & ControlsSold with Six Month Mechanical Warranty

CME R150 Complete Pellet Manufacturing LineComplete line with Pellet mill, Conveyor, Biomass heating, Drying tunnel, and Bagging systemPelletizer -- Pellet Mill CME, Model Millennium R150 (200 HP) -- R150 Roll assembly narrow -- R150 1872 Stainless Steel Conditioner -- Stainless Heavy Duty Force Feeder -- Stainless feeder -- PM8300 Lubricator -- R150 Magnet Dryer and Feeding system -- Drying system (chips & sawdust dryer) 1 ton/hour capacity with infeed system, biomass burner, rotary drum and air discharge fans and controls -- Feed bin (take material from dryer offshoot and feed to grinder -- Mulch dump station (dump hopper for 3-yard bucket -- Bagging line 2, double-ended conveyor with bulk bag scale and frame one end and pellet hopper and 10 - 100 Lbs bag filler (manual) End bagging table andheat sealer for poly bags. -- Includes (1) end-of-line conveyor from the pellet miii cooler. -- 55 HP (600 V) wood grinder with a cyclonic blower to the silo. Takes chips 1” minus under 12% moisture. 1/4" screen -- Feed silo for wood with integrated mixing arm and two auger ports for outfeed to mill -- Triple-headed roller set with high heat bearings and hardened steel roller -- Automatic greasing system for the main bearings for the rollers and shaft -- Auxillary small feed bin hopper with integrated gear-driven mixer and feed auger.

COE 249D Veneer Lathe with the following: -- 27" maximum log diameter, 110" knife length. -- 1484 Veneer Lathe Big Bar. -- 1390 Veneer Lathe Core drive. -- 3 to 1 inner drive ratio. -- Capable of peeling 35 cubic meters per hour. -- This COE Veneer lathe line was completely rebuilt and installed in 2006. The lathe was operated less than one year and is reportedly in excellent condition.

COE 4 Ft. Veneer Peeling Line with the following major components and features: -- Log cut-off saw. -- Geometric lathe charger. -- Dual spindle 4' COE Model 263 Lathe: &#9679 Diameter of outer spindle 7" &#9679 Diameter of inner spindle 4" &#9679 Max. swing 48" &#9679 Knife length 56" &#9679 Lloyd controls including motor starters &#9679 Main drive DC-AC 165 HP/200 HP -- Veneer conveyor to clipper. -- Pneumatic Clipper.ALSO AVAILABLE: VENTEK Veneer Scanner (no computer included).NOTE: Veneer stackers not included.

COLUMBUS MCKINNON - E-915, ...Tire Shredder -- Motor: 250 HP. -- Control panel: 120 Volts. -- Feed opening: 28" x 49". -- Knives width: 2-1/16" (double). -- Weight: 33,000 Lbs. -- Loaded onto Truck.

COMEC - FAS/2, ...Corner Milling MachineCOMEC FAS is a dedicated milling machine with: Inclinable heads for machining the corner of chair seats. Specifications: -- (2) Heads with: 5.5 HP motor and 40 mm spindle shaft. -- Max. cutter size: 150 mm (5.9"). -- Tilting of milling units: 20°/ +45° in horizontal plane. -- Fixed left hand column to support head unit. -- Max. working height: 200 mm (7.8").

COMEC LON-LS Horizontal Belt SanderSpecial design for sanding of straight or curved solid wood parts such as chair legs, chair backs and other similar & difficult-to-sand parts; 10 HP belt driven motor, 12" dia. contact drum for 10" wide x approx. 140" long abrasive belt; air tracking and belt tensioning. - Stock is fed over the contact drum with an overhead variable speed, pneumatically tensioned feed wheel. -- Sander belt is powered with a 6.6 kW (approx. 9 HP) 220/440 V, 60-Cy, 3-Ph motor.

--at Auction, Seller Loading, Excellent Condition!-- COMEVA C-500 Automated Machining Center for Entry Doors A robust and solid construction Gantry style flexible Door Machining Center, which will machine Hinges/Locks on doors, and other similar operations. Horizontal heads (lock and hinges) on each side work simultaneously for faster cycle times. Left horizontal group with movement that permits milling of classical hinges and the European ANUBA "Drill-in" hinges. The vertical group makes holes for crank (handle) and for standard locks, security, electronic lock for hotels, and also performs other milling/grooving operations on the top side of doors. - Working dimensions: 1,100 x 2,350 x 60 mm (43.3" x 92-1/2" x 2.4"). - Working Heads: (2) Horizontal Routers: Fine + Rough; mounted on the side of the table for mortising the hinges, and (1) horizontal router, pointing in the other direction, for the locks mounted on the gantry. (1) Vertical Router mounted on the gantry for the door lock handle, etc. - Drives: (1) Horizontal head for locks; 2.2 kW (3 HP) motor; (2) hinge mortise motors of 0.37 kW (0.5 HP); (1) 1.5 kW (2 HP) on Vertical Router head. All are supplied with high frequency drives. - Operator Control Panel: Separate control console with touchscreen and easy/intuitive programming with the main Macros preinstalled. Features automatic calibration and detection of the door size for correction on dimensions. - Overall dimensions 3,050 x 2,100 x 1,750 mm (120" x 82.7" x 69"). Weight: 1,800 kG (3,960 Lbs). - Includes: Automatic door feeding system double belt strips, gear motor powered. NOTE: - This machine does not include the fixturing device for the frames/jambs, but it can be ordered/retrofitted accordingly if needed. - Engineered & Manufactured by COMEVA S.L, in Spain.

--AT AUCTION-- COMEVA CUBE 3 Compact Edgebander, Single-Phase, Showroom Model – New, with Warranty! The CUBE 3 from COMEVA is designed to be a very compact "every day" Edgebander. The CUBE 3 Edgebander is operated through a PLC control system with a touchscreen. The machine handles panel thicknesses of 0.315" up to 1.77" (8 mm to 45 mm), The coil feed accepts Edgebanding from 0.4 mm to 2 mm thick; strip material can be hand-fed.

COMEVA - CUBE 3, ...Edgebander (Single Phase)The CUBE 3 from COMEVA is designed to be a very compact "every day" Edgebander. The CUBE 3 Edgebander is operated through a PLC control system with a touchscreen. The machine handles panel thicknesses of 0.315" up to 1.77" (8 mm to 45 mm), The coil feed accepts Edgebanding from 0.4 mm to 2 mm thick; strip material can be hand-fed.Equipped with: -- Heated infeed fence for optimum glue penetration. Large capacity Teflon coated glue pot (2.64 Lbs). -- Single motor End Trimming station -- Top & Bottom Trimming -- Top and bottom Buffing. -- Feed speed is variable between 9.8 & 23 FPM (3 - 7 MPM); feed chain pads with replaceable rubberized surface inserts. -- Rubberized holddown rollers with ball bearings for low friction and long life. Work stations: -- Pneumatically operated guillotine for up to 2 mm thick banding, followed by spring loaded double pressure rollers. -- Single front/rear trimming unit, 0.3 HP motor. -- Top & Bottom trimming units, (2) 0.5 HP motors. -- Top & Bottom buffing station, (2) 0.16 HP motors. -- Complete with: Safety enclosure protects the operator from noise and debris. Engineered & Manufactured by COMEVA S.L, in Spain.Includes: Owner’s Manual with mechanical & electrical schematics and parts breakdown; covered by a 1-Year Factory Warranty on parts.

--at Auction, Seller Loading, A lot of air flow value for the money!-- COMPAIR / LEROI WM-100SS II WQ 100 HP Rotary Screw Air Compressor Specifications: Main motor: 100 HP Working pressure: 125 PSI Capacity: 445 CFM NOTE: THIS MACHINE REQUIRES AN EXTERNAL COOLER Note: This machine has (21,311) hours on it.

CONCEPTION CRP-180 Short Block Feeder Infeed ConveyorSpecifications: -- About 4 m long X 1.2 m wide, 2-ply rubber belt, friction back with Photocell for automatic operation -- Short Block Feeder; Blocks to be 25mm longer than width -- 14' rotating carousel with adjustable speed via VFD with Motorized wheel to avoid blockage -- Exit opening adjustable to the block width -- 200 mm x 7m long belt conveyor to carry the blocks to index rolls; Servo indexer controlling the flow powered by an electric motor; Speed-up belt powered by an electric motor -- Wane System: Scanner to detect wane integrated in conveyor -- Display screen to show wane detected; Kicker to kick blocks that are not in good orientation -- Conveyor to return it into the spreader belt conveyor -- Automatic Operations

CONQUEST 1-23H CONSTRUCTION / LINE BORERUSA-Made 46-spindle Horizontal/Vertical Boring Machine.Specifications: -- (2) 2 HP BALDOR Motor to drive a helical gear head with spindles on 32 mm centers. One head with (23) Spindles in the vertical plane and One head with (23) spindles in the horizontal plane. -- Pneumatic head movement to reduce operator fatigue. -- 20-1/2" x 36" Cast iron front table.Complete with: -- 98" Back fence with repeat stops. -- (2) Pneumatically operated index pins & (2) pneumatically operated holddowns. -- Collets that accept 10 mm shank bits. -- Bit requirements of 10 mm shank. -- Foot pedal control....$150.00 crate charge.

CONQUEST 1-23H Horizontal 32 mm Boring Machine;Specifications: (1) 23-Spindle horizontal boring head, 2 HP "BALDOR" motor, helical gear driven spindles spaced on 32 mm centers, 3,450 RPM; cast table. -- Equipped with: Pneumatic head activation, side fences. -- Complete with: (2) Pneumatically activated holddowns and foot pedal. NOTE: This unit has 2 sets of arms. All the screws have been replaced for the drill bits. Ready to go to work!

COSMEC SM 320 Multiple Rip Saw12" multiple rip sawSpecifications: -- 320 mm (12.6") Arbor cap., 60 HP arbor motor, -- 120 mm (4-3/4") cutting height, -- 70 mm dia.- 3,700 RPM arbor, -- 300mm min. to 400mm. max. blade dia., --12-5/8" wide feed chain, -- Variable feed speed, 13 - 78 FPM -- 1 HP motorized opening of the pressure beam. Complete with: -- Anti-kickback fingers, auto. chain lubrication, quick adjust infeed fence, motor load meter, emergency stop button and magnetic starter with overload protection.The SM-320 is built with a heavy duty cast iron base.

COSTA - KBH CCCT 1350 & KH2 CCCT 1350, ...Top & Bottom Sander Line.Head Configuration:Machine #1 - "KBH CCCT" 4-Head Bottom Sander. Bottom Head #1: ~10" Dia. grooved Steel Drum, 47 HP motor. Bottom Head #2: ~10" Dia. grooved rubber covered contact drum, 47 HP motor. Bottom Head #3: ~10" Dia. grooved rubber covered contact drum, 32 HP motor. Bottom Head #4: Finishing platen, 23 HP motor.Machine #2 - "KH2 CCCT 1350" 4r-Head Top Wide Belt Sander. Top Head #1: ~10" Diameter Grooved Steel Drum, 47 HP - 460 V motor. Top Head #2: ~10" Grooved rubber covered contact drum, 47 HP motor. Top Head #3: ~10" Grooved rubber covered contact drum, 32 HP motor. Top Head #4: Finishing platen, 23 HP motor.Specifications: -- PC User interface for each machine. -- Sanding belt size: 53" x 103". -- 96" Belt conveyor in between machines. -- 20 HP Vacuum Blower for each machine's vacuum bed.

Costa S6 XUT 1350 3 Top Head Wide Belt Sander53" Width cap, Crossbelt, Combination Head, PlatenHead Configuration1st Head :Transverse Belt Unit -- Transverse Belt Width: 5.9” (150mm) -- Transverse Belt Motor: 14.75 HP (2nd Head: Combination Roller-Rad, Steel Roller3rd Head :Segmented Pad Unit with Superfinishing Belt, Motor Power: 20 HP (15 kW)Specifications -- Max. Sanding Width: 53.15” -- Sanding Belt Width: 54” (1380mm) -- Min. Sanding Thickness: 0.12” -- Max. Sanding Thickness: 6.3” -- Vacuum belt with fixed pass height -- Feed Belt Speed: variable up to 82 ft/min. -- Feed Belt Motor: 3 HP (2.2 kW)Equipped with & Features -- Top brush on the outfeed -- Single 3kW fan for vacuum feed belt -- Machine Programming Software: LOGIC A -- Total Installed Power: 112 HP (83 kW)

COSTA KH2 CCCT 1350 Wide Belt Sander (4) Heads52" Width cap. Drum, Drum, Drum, PlatenHead Configuration:1st Head: Steel contact roll, 9-7/8" dia. , 45 HP motor;2nd Head: Rubber covered contact roll, 9-7/8" dia., 45 HP motor.3rd Head: Rubber covered contact roll, 9-7/8" dia. 60 shore, 30 HP motor.4th Head: Finishing Platen, 23 HPSpecifications -- 53" x 103" abrasive belts, air blast abrasive belt cleaning, pneumatic belt tensioning with electronic tracking. -- Controls with PLC processor, -- Pneumatic grit compensation with 4-position stops. -- Variable feed speed conveyor with inverter control 16 - 82 FPM.Equipped with & Features -- Vacuum conveyor bed assembly with 5.5 HP suction fan and motor. -- Infeed & outfeed spring loaded hold down shoes on all heads. -- Powered raise & lower conveyor bed with LED readout and motor load meters.