CANTEK 1214 TABLE SAWHeavy-duty cast iron table precision ground for accuracy. -- Rugged machine frame construction provides maximum stability and reduced vibration. -- 14" Blade capacity. and 0° - 45° tilting arbor. -- 10 HP Motor with double V-belt drive. -- Rip fence for a 50" max. cut with a precision Rip fence. -- 48" x 38" Cast iron table. -- Blade guard, miter gauge, push button controls. -- Parts list & operation manual.

CANTEK EM-12 End Matcher;1.6" to 12" Width x 0.4" to 1.38" thickness (to 2-1/4" optional) x 10.6" min. length capacity. Unlimited lengths possible.Specifications: -- Feed speeds to 295 FPM with approximate production speeds of 77 FPM (based on 6-1/2' incoming boards). -- Standard 173" long infeed table and standard 86" (2,200 mm) long outfeed table; -- (2) 10 HP cutterhead motors with 40 mm spindle diameters; 1 HP feed motor; 1/2 HP motor drive to cutterhead carriage; clamping pressure from top and side; 24 volt DC controls.Standard equipment and Features: -- Designed for machining tongue & groove with or without V's on flooring and panel products; designed to be used for finger joint cutting. -- Heavy-duty self supporting main frame; compact design requires minimum floor space.Feedworks: -- Capable of processing material as short as 11" to an unlimited length; variable speed through-feed systems is controlled by frequency inverter; through-feed system allows the tongue to be cut simultaneously on the tail of one board and the leading edge of the next board. -- Powered top Urethane rolls and spring loaded bed rollers feed the material into position for processing. -- Pneumatic side pressure ensures the material is held square against the fence.Complete with: -- Safety and noise reduction enclosure; convenient touch screen control is used to quickly activate and adjust the machine functions. -- Powered 176" long infeed conveyor is included (additional length optional); with a 86.6" long outfeed table (additional length optional). -- Includes: (2) Individual Precision Insert Tooling Heads as Supplied with Machine & stacked to make (1) pair of heads; set of heads provided for groove on left and tongue on right.

CANTEK MODEL CFS100 / EM-12 DEFECT SAW AND END-MATCHING SYSTEM:Consisting of a CANTEK model "CFS-100" Optimizing Cut-Off Saw followed by a CANTEK Model "EM 12" Through-Feed End Matcher and with the following specifications and features: CANTEK "CFS-100" OPTIMIZING CUT-OFF SAW -- Up to 20 mm X 200 mm or 100 mm X 100 mm( 3/4" X 7.87" or 3.9" X 3.9" cutting capacity with 18" x 30 mm bore sawblade is driven by a 10 HP motor driving the saw spindle at 3,200 RPM; 2.7 HP servo drive feed system drives the stock up to 260 FPM; 0.787" min. distance between crayon marks; requires 75 to 80 PSI at the saw and 100 to 120 PSI at defect blow-off station. Machine comes completely wired and programmed. -- Machine is ideal for separating crayon marked waste zones from useable material before entering into a feed-thru End Matcher; provides (3) times greater production than manual cut-off saws.5% + Material recovery (yield increase) over manual cutting; compact and user-friendly design; controller adopts an industrial grade computer that employs a 32-bit floating-point DSP system and features flash and battery backup SRAM for double security; superior to conventional PC-based controls, it can fully eliminate the machine going down or being damaged due to a poor environment, such as, unstable voltage, high temperature, sawdust, etc. -- With defect blow-off system combined with computerized logic control permits the blow-off time and the length of defect to be set as desired; provides efficient defect removal and eliminates defects from bumping against the sawblade, resulting in the machine going down or sawblade damage. -- Computer control provides easy and fast maintenance; feed system driven by a servo motor for fast and accurate motion and position control; max. feed speed up to 260 FPM; cutting rate up to 80 cuts per minute with cutting accuracy within approx. ±1mm / 0.40"; control employs a touch screen for easy learning and operation.Features: -- New machine design features maximum maintenance convenience; high quality electric components provide maximum dependability; safety guards for maximum operator protection; 48" long infeed table standard - longer available option; 18" carbide blade included.(5) Cutting modes include: -- Adjustable end cuts to a max. of 10mm (0.4") -- Fixed length of cutting mode. -- Sequential cutting mode with (10) sets of cutting sizes held in memory (for sequential cutting mode only). -- Cutting on fluorescent marks with double-end trimming (perfect solution for end matching). -- Reading fluorescent marks with double end trim, fixed-length, random length end match, and finger joint block cutting. CANTEK "EM-12" END MATCHER -- Continuous through-feed system; handles random length min. 10.6" to any length x 0.4" to 1.38" thickness x 12" width capacity; -- 295 FPM max. feed speed; average speed of 75 FPM based on 6'-6" board lengths; with 118" infeed and 98" outfeed tables; -- 5.5 HP Shaper motors, 1 HP feed motor an

CANTEK C 371 WIDE BELT SANDER1-Head, 36" width cap., 20 HP motor, 5" motorized opening can be adjusted with the handwheel or automatically with the pre-set a the machine control. -- Single abrasive head with combination drum/adjustable platen using a 37" x 60" belt. -- 1 HP variable speed mechanical drive on the conveyor allows feed speeds of 15 to 60 FPM. The conveyor bed has (4) heavy support jacks. -- The pre-set controls have an LED display of the position of the bed opening along with AMP meter and start/stop buttons.

CANTEK - GOODSPEED CP-1250 AP Hydraulic Copy Lathe. -- General Data: 44" Length cap. with 4" min. length of stock and 1/2" - 4" max. diameter cap., hopper feed with automatic chucking, square or round stock can be hopper fed. -- Equipped with: 7.5 HP Spindle motor, 1,800 - 3,200 RPM spindle speed adjustable by pulley change, 3 HP hydraulic motor. -- Complete with: Swivel control panel, PLC sequence controller built into separate control cabinet, (3) pressure gauges, automatic way & support collar lubrication & safety wire mesh across the front of machine. -- Includes: Two hydraulic copiers (rough + fine). Travelling steady rest and installed knives. -- Production capacity: Approx. (5 - 7) pieces/Min for 600 mm length, (3 - 5) pcs./Min for 900 mm length, (2 - 3) pcs./Min for 1,200 mm length, depending on cutting speed, type of material, etc. -- Electrical load: 11.4 amps, 10.5 HP @ 575/3/60.volts.

DEWALT 10" Radial Arm Saw --Specifications: -- Blade diameter 10", Table size 27" x 30" x 36" H.

DEWALT GE Radial Arm Saw Specifications: -- 5 HP TEFC Saw motor; 16" dia. blade; 1" x 3-1/8" saw arbor; 4" thickness cap. @ 90°, 19" crosscut cap., cutting 1" board with long arm. -- Complete with: -- Blade guard, magnetic starter, metal stand, table clamps. -- Specifications subject to verification.

DIEHL - 990, ...Gang Rip Saw (Roll Feed)Specifications: -- 30 HP - 3,600 RPM arbor motor, ALLEN-BRADLEY "Size 4" Starter, 110 volt controls. -- 12" Arbor width with: 3-1/2" Max. thickness cap. -- 8-Roll feed: (4) Top (powered) & (4) Bottom. -- Antikickback fingers: Top & Bottom. -- (1) Saw Cartridge: 2-3/4" Saw blade bore. -- New arbor bearings.Equipped with & Features: -- 5 HP Feed: single speed. -- Rip fence. -- Outboard bearing on arbor. -- 3" Throat capacity to 1st saw blade.

DIEHL - 75, ...Straight Line Rip SawSpecifications: -- 10 HP Direct drive arbor motor, 2" dia. arbor, 18" blade cap. -- 4" Max. depth of cut, 12" min. part length. -- 21-1/2" Width of table to the right of blade & 37" to the left. -- 2 HP Feed speed motor; different speeds can be achieved by changing pulleys, 30 - 50 - 75 & 120 FPM. -- Twin chain drive, automatic dip lubrication. -- Top pressure system with: (6) Full width rollers & (2) split rollers over the blade.Note-1: The 1st feed speed does not work; this could be a simple electrical problem.Note-1: The Seller does not have a large enough Forklift to load it on a truck; a 3rd-party rigger would be needed...

DIEHL - DMG -12, ...Profile GrinderSpecifications: -- 1/2" Width cap. and 10-1/2" max. cutting circle. -- 1 HP TEFC Motor with 2,260 RPM grinding spindle. -- (2) 1-13/16" Dia.; 16" X-axis & 6" Y-axis table movement. -- 30° Clockwise & 90° counterclockwise base swivel rotation for face grinding of profile cutters or planer knives. -- +30° to -30° Vertical grinding spindle adjustment. -- 2" In & out adjustment. -- 1" X-Axis & 1-7/8" Y-axis template adjustment. -- 7" Min. & 10" max. grinding wheel dia.Equipped with & Features: --Coolant pump with 5-gallon tank.

15 HP Motor - 3,450 RPM belt driven fixed arbor, 14" - 16" blade dia., 2-1/2" max. thickness; 2 HP - 1,800 RPM feed drive, variable feed speed of 50 - 140 FPM. -- 30" Throat depth to right of blade, 18" of table to left of blade, 56" long table, cast iron pressure bar arms with ball bearing rollers, 60" guaranteed glue joint accurate. -- Multi-V, fully machined, pyramid corrugated single feed chain. -- Complete with: Adjustable rip fence, self-adjusting upper anti-kickback fingers with cam height control & lower anti-kickback fingers in table, pressure beam outfeed guard with pivoting side pressure, automatic pneumatic lubrication of feed chain & race, full overload & under voltage protection, automatic brake for arbor protection, and pressure bar curtain. -- Options: Diode laser & mounting bracket, please add ...$2195.00, 20 HP motor, add ...$2,035.00 208, 240, or 480 Volt

15 HP Motor - 3,450 RPM belt driven fixed arbor, 14" - 16" blade dia., 2-1/2" max. thickness; 1 HP - 1,800 RPM feed drive, variable feed speed of 50 - 140 FPM. -- 19" Throat depth to right of blade, 18" of table to left of blade, 56" long table, cast iron pressure bar arms with ball bearing rollers, 60" guaranteed glue joint accurate. -- 1.5 HP feed motor, Multi-V, fully machined, pyramid corrugated single feed chain. -- Complete with: Adjustable rip fence, self-adjusting upper anti-kickback fingers with cam height control & lower anti-kickback fingers in table, pressure beam outfeed guard with pivoting side pressure, automatic pneumatic lubrication of feed chain & race, full overload & under voltage protection, automatic brake for arbor protection, and pressure bar curtain. -- Options: Diode laser & mounting bracket, please add ...$ 1,195; 20 HP motor, add ...$ 1,365.

DIEHL - SL 50, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,450 RPM Direct drive arbor motor, 2" dia. arbor. -- 16" Blade cap., 2-1/2" max. depth of cut. -- 10" Min. part length. -- 49" Width of table to the right of blade & 26-5/16" to the left. -- 57" x 79" Tabletop size. -- 2 HP Feed drive, feed speed of 65 - 195 FPM.Equipped with & Features: -- Twin chain drive. -- Automatic dip lubrication. -- Top pressure system with: (6) Full width rollers & (2) split rollers over blade. -- Rip fence. -- Push buttons and magnetic starters. -- Floating rip fence. -- Self-adjusting antikickback fingers. -- Full overload & undervoltage protection.

DIEHL - 75, ...Straight Line Rip SawSpecifications: -- 10 HP Direct drive arbor motor, 2" dia. arbor, 18" blade cap. -- 4" Max. depth of cut, 12" min. part length. -- 21-1/2" Width of table to the right of blade & 37" to the left. -- 2 HP Feed speed motor; different speeds can be achieved by changing pulleys, 30 - 50 - 75 & 120 FPM. -- Twin chain drive, automatic dip lubrication. -- Top pressure system with: (6) Full width rollers & (2) split rollers over the blade.Note from seller: SLR in very good condition. Has been serviced by a Diehl factory technician. Chain is good with minimal slippage. Parts are still available from Diehl for this machine'The one and only reason we are selling this saw is that we need the floorspace'Factory-wired for 460v 3-phase, includes a transformer to reduce to 208V.

DIEHL - SL-52, ...Straight Line Rip SawSpecifications: -- 15 HP Motor, 3,600 RPM belt driven, fixed 2" arbor. -- 14" to 18" Blade diameter. -- 4-1/4" Max. thickness with 18" blade diameter. -- 2 HP - 1,800 RPM feed drive, variable feed speed from 65 to 190 FPM. -- 25" Throat depth to right of blade, 24" of table to left of blade. --Table size: 61" x 80".Equipped with & Features: -- Cast iron pressure bar arms with ball bearing rollers. -- Adjustable rip fence. -- Self-adjusting antikickback fingers with control cam. -- Automatic lubrication of feed chain & race. -- Full overload and under voltage protection. -- Manual arbor brake for safety with interlock.Shipping Dimensions 7-1/2' L x 7' W x 5-1/2' H; weight of 5,000 Lbs.

DIEHL - SL-52, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,600 RPM belt driven motor, fixed 2" arbor. -- 14" - 18" Blade diameter. -- 4-1/4" Max. thickness with 18" blade diameter. -- 2 HP - 1,800 RPM feed drive, variable feed speed from 65 to 190 FPM. -- 25" Throat depth to right of blade; 25" of table to left of blade. --Table size of 78" x 64".Equipped with & Features: -- Cast iron pressure bar arms with ball bearing rollers. -- Adjustable rip fence. -- Self-adjusting antikickback fingers with control cam. -- Automatic lubrication of feed chain & race. -- Full overload and under voltage protection. -- Manual arbor brake for safety with interlock; 34".Shipping Dimensions: 7-1/2' L x 7' W x 5-1/2' H; weight: 5,000 Lbs.

DIEHL - SL 55, ...Straight Line RipsawSpecifications: -- 15 HP - 3,450 RPM Direct drive arbor motor. -- 2" Dia. arbor, 18" blade cap., 4" max. depth of cut. -- 12" Min. part length. -- 21-1/2" Width of table to the right of blade & 30" to the left; 43" table length. -- 2 HP Feed motor, 55 or 110 FPM. -- Split feed chain with arbor from below the chains for best glue line cut possibleEquipped with & Features: --Automatic dip lubrication. -- Top pressure system with (6) full width rollers & (2) split rollers over blade.

DIEHL - TFM-68, ...4"; x 8"; 6-Head High Speed Jointed Moulder6-Head (B-R-L-R-T-B) with 8-5/8" x 4-1/2" capacity. Head sequence: Bottom 15 HP, Right 10 HP, Left 10 HP, Right 10 HP, Top 15 HP, and Bottom 20 HP motor.1st Bottom and 1st right side run at 3,600 RPM; all the other spindles run at 6,000 RPM utilizing the included Frequency Changer.Side heads tilt 35° inward and 5° outward. Specifications: -- Spindle diameter: Vertical 1-13/16"; Horizontal 2-1/8" dia. for top spindle only. -- Built-in straight & profile jointers on spindles 2 - 3 - 4 & 5. -- Variable feed speed from 20 - 150 FPM via 15 HP feed drive. -- Cardan Shaft driven. -- WAXLIT Pump and groove bed with groove cutters for 1st bottom. -- Air chipbreakers and feed roll tensioning. -- Starting panel and transformer included.Weight: Approx. 14,000 Lbs

DIEHL - SL-52, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,600 RPM Belt driven motor, fixed 2" arbor. -- 14" - 18" Blade diameter. -- 4-1/4" Max. thickness with: 18" Blade diameter. -- 2 HP - 1,800 RPM feed drive, variable feed speed from 65 to 190 FPM (need to be repaired actually single speed only). -- 25" Throat depth to right of blade; 25" of table to left of blade. --Table size: 78" x 64".Equipped with & Features: -- Cast iron pressure bar arms with ball bearing rollers. -- Adjustable rip fence. -- Self-adjusting antikickback fingers with control cam. -- Automatic lubrication of feed chain & race. -- Full overload and under voltage protection. -- Manual arbor brake for safety with interlock; 34".Shipping Dimensions: 7-1/2' L x 7' W x 5-1/2' H; Weight: 5,000 Lbs.

DIEHL SL-55 Straight Line RipsawSpecifications: -- 15 HP - 3,450 RPM Direct drive arbor motor, 2" dia. arbor, 16" blade cap. -- 4" Max. depth of cut, 12" min. part length -- 20-1/2" width of the table to the right of blade & 30" to the left, 66" table length.Equipped with & Features: -- 3 HP 4-Step feed drive 30 - 50 - 75 & 120 FPM; -- Twin chain drive. -- Automatic drip chain lubrication. -- Top pressure system with (6) full-width rollers & (2) split rollers over the blade.