HEIAN NC 442 P MC-1515W CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Twin Tables with: (2) 60" x 60" (1,525 x 1,525 mm) size; each table with (4) movable rails & (3) movable vacuum pods per rail.Twin tables can be controlled separately or locked together to form (1) 60" x 120" table.Vacuum pods are activated with (2) independent foot pedals. -- Head Travel/Stroke:"X" Axis 138" (3,500 mm), "Y" axis 73" (1,850 mm), & "Z" axis stroke is 9.8" (250 mm); max. material thickness 4" (100 mm). -- Positioning Speed:Positioning feed speed on all axes: 49 FPM (15 MPM). To guarantee the highest of positioning accuracy, all axes travel on precision ground ways and high precision large diameter ground ball screws.Axis drive motors are FANUC AC Servo type, closed loop. -- Boring Unit: FBU-20 Brings unit with 2" (50.8 mm) center spacing.(7) Independent vertical spindles in "X" axis & (7) independent vertical spindles in "Y" axis. (8) Horizontal drill spindles with: (3 + 3) in "X" Axis & (1 + 1) in "Y" axis. -- Machining:(1) 2P 10/12 HP (7.5 / 8.8 kW) Router spindle with BT 35 adaptor for automatic tool change.Variable speed control from 1,000 to 18,000 RPM & constant torque output between 9,000 and 18,000 RPM. Spindle is oil mist lubricated to insure smooth operation and long life, solid-state frequency inverter for spindle.(1) 8-Position automatic tool changer for BT-35 tool holders. -- Operator & Machine Control:FANUC Model "15M-A", 4-Axis Controller (32-bit processor) with: 9" CRT Screen, RS-232 interface; all in sealed cabinet w/built-in heat exchanger.15M-A Control features: High-speed M-code & S-code interface (PMC-N), self-diagnostics, absolute/incremental programming in inch & metric, automatic EIA/ISC recognition, etc. -- Complete with:(2) BECKER - 5 HP (3.7 kW) Vacuum Pumps; Original operator manuals & electrical/pneumatic diagrams. -- Actual Model is: HEIAN NC 442 P MC-1515W.

HOLZ-HER PRO-MASTER 7122 K 4X CNC MACHINING CENTER (W/ATC/BORING/ "C" AXIS): -- Specifications: Working capacity: "X" Axis 142" (3,607 mm); "Y" axis is 59" (1,500 mm); "Z" axis stroke is 22.2" (565 mm); max. material thickness: 8.26" (210 mm) from the top of the vacuum pod. -- Positioning Speed: "X" Axis is 393 FPM (120 MPM); "Y" axis is 328 FPM (100 MPM), "Z" axis 82 FPM (25 MPM)."X" Axis travel on high precision prismatic STAR guides & ground helical rack; "Y" & "Z" axes travel via hardened ground ball screw. -- Worktable:(6) Support rails, (2) adjustable vacuum pods per rail.Laser positioning system for quick positioning of pods and with value input from Controller according to part size and machining required.(6) Pneumatic pin stops located in the rear of the machine; (6) pneumatic pin stops located in the front of the machine.(2) Side stops & (2) central stops for mirror imaging; (2) independent working areas.Stops can be fitted with "quick fit" mushroom clamps for clamping of small or awkward shaped parts. -- Boring Head:4 HP (3 kW) Motor; variable spindle speed from 1,000 - 6,800 RPM; (18) independent vertical boring spindles with: (12) Spindles in "X" axis & (6) spindles in "Y" axis.(6) Horizontal spindles with: (2 + 2) in "X" Axis & (1 + 1) in the "Y" axis.(1) "X" Axis grooving saw for max 120 mm dia. blade. The boring head is arranged to accommodate (2) operating units. -- Machining Units:(1) 13 HP (9.7 kW) Vertically mounted liquid cooled electrospindle with: HSK 63F Adaptor; inverter driven 1,000 - 24,000 RPM with max. torque from 12,000 - 24,000 RPM.(1) NC Controlled "C" axis for 360° horizontal processing.(1) 18-Position ride-along rotary tool changer plate for "on the fly" ATC.Max. tool dia. 85 mm (if fully loaded) or 200 mm (with free spaces). -- Operator & Machine Control: SIEMENS PC Front-End + "CAMPUS" + Windows "7" operating system with 3D simulation.15" Color monitor; standard PC Keyboard & mouse; CD-ROM drive. - Card ports: (1) AGP, (1) PCI, and (1) ISA; (2) serial ports & (2) parallel ports; (2) PS/2 ports & (4) USB ports; (2) PCI Bus-Master IDE ports; (3) Com 905B-Combo fast Ethernet cards.Hand-held pendant for remote control start/stop of working cycle, speed control, reset function, etc."CAMPUS" is user-friendly CNC software with office and machine license; extensive 3D simulation module as standard feature; integrated CAD module and versatile macros for easy programming. -- Complete with:(1) 100 cbm/Hr Vacuum Pump; tool length "Touch-Off" Probe; emergency stop rope & pressure sensitive safety mats that will instantly place machine in "pause cycle" when stepped on.Sound absorbing protective head enclosure with debris curtain around bottom edge.Actual Model is: HOLZ-HER - PRO-MASTER 7122 K 4X.

HOLZ-HER 1619 BORING MACH. (CONSTR. & LINE BORING): -- Specifications:(19) Spindles on 32 mm centers; bores vertically from top and horizontally from the rear, repositions via manual air shock assisted tilting;2 HP motor with 2,800 RPM gear driven boring head. -- Features:4-Position turret style depth stop for boring depth and a 4-3/4" max. stroke of boring head;24-3/4" working width, 27-1/8" max. panel width, 19-1/2” x 38” x 32-1/2” H table size. -- Equipped & Complete with:RH & LH Indexing fence with flip stops, (2) indexing pins (for continuous line boring), (3) 4" Dia. pneumatic hold-down clamps, foot pedal actuator, and magnetic push button starter. -- Actual Model is HOLZ-HER 1619Dimensions of this specific machine with pallet: 52" x 40" x 65" H.Dimensions of this specific machine when vertical: 52" x 37" x 60" H.Dimensions of this specific machine when horizontal: 52" x 51" x 46" H.

HOMAGDRILLTEQ V-200 CNC MACHINING CENTER (VERTICAL/W/BORING): -- Specifications: Flexible "Vertical" Machining Center with "BORING": Uses less than 5 sq. meter of valuable floor space in addition to an innovative panel handling system. -- Working Cap.Max. workable part size for "X" axis is 120" (3,050 mm); "Y" axis 33.4" (850 mm); max. part thickness 3.1" (80 mm).Min. worktable part size for "X" axis is 7.8" (200 mm); "Y" axis 2.75" (70 mm); min. part thickness of 0.31" (8 mm). - Automatic infeed & outfeed from the LH or RH side. -- Positioning SpeedThe "V-200" can reach movement speeds of 164 FPM (50 MPM) in "X" & "Y" axis & 50 FPM (15 MPM) in "Z" axis with total safety, providing an unmatched working capacity. -- Boring Unit(1) 3 HP (2.3 kW); Variable speed from 1,500 - 7,500 RPM motor; (13) independent spindles with: (8) spindles in "X" axis & (5) spindles in "Y" axis.(6) Horizontal spindles with (2 + 2) in "X" axis & (1 + 1) in "Y" axis; boring block has "QUICK CHANGE" spindle system. -- Operator & Machine ControlHOMAG "POWERTOUCH" + Windows + WoodWOP Operating System; "IntelCore 2 DUO" Processor.21" TFT Monitor; international keyboard, soft touch keypad & industrial mouse; RS-232 Serial ports, USB ports; (1) 1.44 MB floppy disk drive, (1) CD RW drive, modem, Ethernet connection.Real-time multitask processing; programs can be transferred via diskette or downloading by wire is possible. -- Complete with:Pneumatic part clamping devices; sound enclosure and complete set of safety devices. -- Options Include:(1) "X" Grooving Saw; 9,000 RPM, max. saw blade dia. 100 mm.(1) 12 HP (9 kW) Electro Spindle router with manual Quick-Change adaptor; variable speed from 6,000 - 24,000 RPM. -- Actual Model is: HOMAG DRILLTEQ V-200 OPTIMAT BHX 055.

INTERWOOD B-3223 DOUBLE ROW LINE BORER(2) Drill heads of (23) spindles ea. and (1) motor for ea. drill head with 2 HP, 2,800 RPM; drills from top down. -- Equipped with: (3) Position turret stop for drill depth adjustment, buffer for "through-boring"; (2) pneumatic pin stops for multiple line boring, right and left hand fence with flip stops, foot pedal drill cycle, table top panel clamp to ensure that the panel is against the fence line. -- Capacity between drill heads of 7" (180 mm) Min. to 25-1/2" (650 mm) Max. -- Includes: Set of bits that are in machine.

J & P MACHINES - DH 2N, ...Double Hinge Drilling & InsertingDouble Drilling & Hinge Inserting Machine.Features: -- Fast setup from small to large doors. -- User-friendly movable head, which is easy to move to the preset stops. -- Pneumatic lock allows drilling at any distance. -- Quick-change hopper magazines with a loading capacity of (35) hinges. -- Insertion slide with UHMW non-wearing plastic. -- Creates chip-free bores on melamine and other sensitive materials by drilling from below. -- Boring heads with hardened gears and spindles. -- Linear bearings on slides for up & down movement. -- No tools required for precision depth adjustments. -- Double safety controls with: Metal detectors and photo eye prevent the boring unit from cycling again into the previously installed hinge. -- Dust extraction hoods with 4″ dia. -- Min. closing distance between heads is 7″ (180 mm). -- Max. opening distance is 60″ (1,520 mm); other sizes available upon request. -- PLC Control and proximity sensors. -- Emergency cord switch.Specifications: -- 2 HP - 3,600 RPM, 440 V, 3-Phase motors. -- Cycle time approx. (4) Sec. -- Compressed air 90 PSI. -- Weighs approximately 600 kG -- Dim.: 80″ L x 32″ W x 50″ H.

LAGUNA BM23E-2 ... Double Row Line Borer(2) 23-Spindle heads on 32 mm centers, (2) 3 HP motors, drills vertically from bottom.Specifications: -- Distance between first and last spindle 851 mm (33.50"). -- Spacing between zero and max. on the first head 0 - 4". Min. distance between two heads 7.25". Max. boring line spacing to the second head 24". -- 2,800 RPM spindle speed; collets accept 10 mm shank bits. -- Heavy overhead material holddown system with (4) pneumatic material clamps. -- (2) independent air throttles to control the drill-heads upstroke speed.Complete with: -- "Set screw" drill adapters, "quick set" system for depth of drilling. -- Extension fence with (3) flip-stops and foot pedal control.

MAGGI GT 800 CNC MACHINING CENTER (P TO P): -- Specifications:Flexible "Vertical/Horizontal" Boring & Grooving Machining Center that can reach movement speeds of 82 FPM (25 ) in "X" & "Y" axis & 49 FPM (15 MPM) in "Z" axis with total safety. -- Working field: Maximum part size for "X" axis is virtually Infinite, "Y" axis 31.5" (800 mm), max. part thickness 2" (50 mm). Minimum part size for "X" axis is 9.84" (250 mm), "Y" axis 3.93" (100 mm), min. part thickness of 0.39" (810mm);Panel End/Edge Reader for perfect panel positioning/placement. -- Boring unit:Suitable for drilling on face and sides of panels, including holes for dowels, hinges, KD Fittings and shelf holes(1) Boring block with 3 HP (2.2 kW) - 3,400 RPM motor; (7) vertical spindles with (4) spindles in "X" axis & (3) spindles in "Y" axis.(1) Horizontal spindles with (1+1) in "X" axis for top & bottom edge boring(1) "X" axis grooving saw, 5,000 RPM, max 100 mm saw blade diameter.Boring Capacity 0 to 800 mm (31.5") with any spindle -- Operator & Machine Control:PC front end with extremely intuitive user interface with up to 1,000 program storage space; Real-time multitask processing;12" TFT "Touch-Screen "Monitor; soft-touch keypad & industrial mouse; RS-232 Serial ports, USB ports; (1) CD ROM drive. -- Complete with:Pneumatic part clamping roller devices; auto lubrication system; sound enclosure & safety devices. -- Actual Model is MAGGI GT 800

MAGGI SYSTEM 21 PRESTIGE Construction & Line BorerAdjustable 21-spindle boring head on 32 mm centers with position indicator.Specifications: -- Stops in 0° and 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with magnifying glass viewer. -- 2 HP - 2,800 RPM Motor. -- 34" x 15" Table with mechanical digital side fences for mirror-image. -- 120" Line Boring fence with (2) repeat stops. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks.OPTIONAL: -- 230V Single Phase add $600.00 --29900100 Stop Reference Pin for Line Boring $195.00 -- 26000069 Set of Reference Fences for 45 and 90 degrees $195.00 -- 36000061 Additional Quick Change Bit Adaptor $27.50 ea -- 29971019 Additional Holddown Cylinder Assembly $395.00 ea -- Hinge Boring Head (Specify Blum, Grass, Salice, or Hettich) $695.00 -- TDBSE5705LH or RH 5mm x 57mm LH OR RH Brad Point $9.85 ea -- TDBSE5708LH or RH 8mm x 57mm LH OR RH Brad Point $11.95 ea -- TDBSEHB5735LH or RH 35mm x 57mm LH OR RH Hinge Point $26.80 ea -- FREIGHT TO ANYWHERE IN THE CONTINENTAL USA $ 300.00

MAGGI SYSTEM 23 Construction Hole Boring Machine Adjustable 23-spindle boring head on 32 mm centersSpecifications: -- Stops in 0° & 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with a mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 38" x 16" Table with mechanical digital side fences for mirror-image. -- 120" Line Boring fence with (4) repeat stops & spring loaded repeat pin. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks. -- Dust Outlet: 3".Net weight: 630 Lbs; Dimensions: 51.7" x 37.8" x 50" Tall; Crated Dimensions: 44" x 38" x 42" Tall; Crated Weight: 664 lbs.Available in single phase ... Add $ 600.00

MAGGI SYSTEM 29 CONSTRUCTION/LINE BORERAdjustable 29-spindle boring head on 32 mm centers with position indicator. -- Stops in 0° & 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 45" x 16" Table with mechanical digital side fences for mirror-image. -- 120" Line boring fence with (4) repeat stops & spring loaded repeat pin. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks. -- Other Accessories also Available!

MAGGI SYSTEM 35 CONSTRUCTION/LINE BORINGAdjustable 35-spindle boring head on 32 mm centers with position indicator. -- Stops in 0° & 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 45" x 16" Table with mechanical digital side fences for mirror-image. -- 120" Line boring fence with (4) repeat stops & spring loaded repeat pin. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks. -- Other Accessories also Available!

MAGGI SYSTEM 46 Double Head Line Boring Machine:Heavy Double Head Line Borer with (2) 23-spindle heads; 32 mm spindle spacing.Specifications: -- Drilling from the bottom up and with 5-1/8" - 25-19/32" distance between rows. -- Drilling vertically from the bottom allows the chips to drop down falling out of the holes. -- Drilling depth of up to 2-1/16" (55 mm) max., takes only seconds to set. -- (2) 2 HP - 3,500 RPM Commercial Duty motors; spindles with steel gears & high quality bearings. -- Easy repetition by (2) air index pins for continuous line drilling, left and right roller track supports extend up to 400 mm (15-3/4") for larger panels.Features and Includes: -- 120" Back fence with (4) repeat "flip" stops; includes 27-3/4" (704 mm) fence for quick positioning of flip stops. -- (6) Pneumatic holddowns to automatically actuate when the drill cycle begins. -- (46) "Quick Change" chucks for easy tool change. -- Magnetic motor controls and 1/4" air regulator with filter and oiler; 100 PSI required air pressure.

MASTERWOOD PROJECT 313 CNC MACHINING CENTER (W/ACT/BORING): -- Specifications:Working Capacity:"X" Axis 3,080 mm (121"), "Y" axis 1,100 mm (43") width; -- Positioning Speed:Programming speed in X-axis 197 FPM (60 MPM), Y-axis 162 FPM (49 MPM), Z-axis 58 FPM (18 MPM). -- Boring unit:(13) independent vertical spindles, (9) in X-axis, (5) in Y-axis; (4) horizontal spindles with (1 + 1) in X-axis for edge boring in the left- & right-hand panel edges. -- Machining:(1) 7.5 HP (5.6 kW) high speed router (1,000 - 24,000 RPM) by frequency inverter; 1.5 HP (1.1 kW), 6,000 RPM grooving saw with manual rotation for X-axis or Y-axis; -- Work Table: (6) moveable support rails with (2) vacuum cups ea., double zero settings, (6) pneumatic backstops and (2) pneumatic side stops creating (2) working zones. -- Operator & Machine Control:TECNOSUD "K68800" Microprocessor control for (3) axis, lineal, circular, and helical interpolation. Equipped with 14" color video graphic monitor, keyboard for data entry, 1.44 MB floppy disk drive, 64K RAM, RS-232 for possible connection to office PC, all mounted in separate free-standing control cabinet; features to run CPL/Parametric "TRIG" programming and "Spline" CAD/CAM. -- Complete with: Dual zone vacuum pump. Ontario Hydro approved electrics. -- Actual Model is MASTERWOOD PROJECT 313

ME.SA M21 BORING MACHINE21-Spindle boring head on 32 mm centers, drills vertically from bottom up and head rotates to horizontal position for edge boring, head rotation is manual tilting with assistance from a strut. -- 2-3/4" Max. drilling depth, 2 HP - 2,800 RPM motor, pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 34" x 20" table size, max. workpiece width 31-1/2". -- Equipped with: Left & right side fences with stops for mirror-image fence setting for right- & left-hand boring, (2) pneumatic holddown clamps, pneumatic foot pedal control, and magnetic starter with overload protection.

MORBIDELLI PLANET HP CNC MACHINING CENTER (W/EDGEBANDING): -- Specifications:"Bridge Gantry" TWIN TABLE Routing & Edgebanding Center with (2) independent working tables: (2) Independent routing units mounted to the back side of the support beam.1) Independent edgebanding unit mounted to the front side of the support beam; it is possible under some circumstances for all (3) units to work simultaneously & totally independent of each other. -- Working Fields:Working field with both tables locked together; "X" axis 157.4" (4,000 mm); "Y" axis 70.8" (1,800 mm); "Z" axis stroke 15.7" (400 mm); max. material thickness when machining 6.6" (170 mm).Working field for each individual table: "X" Axis 63" (1,600 mm); "Y" axis 70.8" (1,800 mm); "Z" axis stroke 15.7" (400 mm); max. material thickness when machining 6.6" (170 mm). -- Edgebanding:Minimum internal radius when edgebanding 1.18" (30 mm) & minimum external radius when edge banding 0.39" (10 mm), depending on the type of banding material; max. material height when edgebanding 2.36" (60 mm). -- Positioning Speed:"X" & "Y" Axes 492 FPM (150 MPM); "Z" axis 82 FPM (25 MPM); "X" & "Y" axes uses a helical Rack & Pinion system, "Z" axis uses precision ball screws.All axes movement is on precision linear guides & ways & controlled by digital, brushless AC Servo motors; all motion components are maintained by an automatic lubrication system. -- Worktables:(2) Independent Worktables with: (8) Tubeless support rails; (4) rails with (4) pneumatic lifters each table; (2) vacuum pods per rail; manual positioning of rails & vacuum pods via LED positioning indicators & according to the parts processing requirements from the NC Control.(4) Pneumatic backstops; (2) pneumatic side stops & (2) pneumatic centerstops per worktable. -- Boring Units:(2) Independent boring units, each with: (1) 4 HP (3 kW) motor, 4,500/6,000 RPM; each head with (18) independent vertical boring spindles; (14) spindles in "X" axis & (4) spindles in "Y" axis (one shared spindle).Each head with: (6) Horizontal spindles, (2 + 2) in "X" axis & (1 + 1) in "Y" axis. -- Routing Units:(2) Independent routing units, each unit with (1) 10 HP (7.5 kW) air cooled electro-spindles with "HSK 63" adaptors; programmable from 1,500 - 18,000 RPM;Each spindle with NC controlled "C" axis for 360° horizontal processing.(24) Automatic Tool Changers with: (1) 12-Position ATC toolholder mounted at each head for "on the fly" ATC (max. dia. tooling 180 mm when leaving open space on either side of the tool). -- The boring & routing heads are mounted to back side of the central support beam. -- Edgebanding Unit:(1) Edgebanding unit mounted to the front side of the support beam; NC controlled 360° operation for straight or contour edges with hot melt applicator and pressure rollers swiveling via a "C" axis;300 mm min. Part length for radius edgebanding; 0.4 - 3 mm PVC thickness and 0.4 - 2 mm veneer thickness.(1) 3-Coil magazine for automatic coil material feeding

MORBIDELLI AUTHOR 504 CNC MACHINING CENTER (W/ATC/BORING/"C" AXIS): -- Specifications Working cap. "X" Axis 122" (3,100 mm);, "Y" axis 48.4" (1,230 mm) for routing, 40.9" (1,041 mm) for boring; "Z" axis stroke 4.5" (115 mm) max. material thickness 3.1" (80 mm). -- Positioning SpeedPositioning speed on: "X" Axis is 213 FPM (65 MPM); "Y" axis 131 FPM (40 MPM); "Z" axis is 65 FPM (20 MPM). -- Work Area:(8) Adjustable panel supports with: (4) Pneumatic lifter roller bars for heavy panels.(8) Pop up front stops; (8) pop up backstops; (2) LH pop up side stops; (2) RH pop up side stops. Each panel support with (3) vacuum cups.Worktable setup for (4) separate working areas. -- Boring Unit(1) 4 HP (3 kW) Motor with (29) Independent vertical boring spindles forming a T-configuration.(15) Independent spindles on the "X" axis and (14) independent spindles on the "Y" axis.Total of (8) horizontal spindles for boring on all (4) edges of the panel: (3 + 3) on the "X" axis & (1 + 1) on the "Y" axis. -- Machining(1) 10 HP (7.5 kW) ISO 30 Vertically mounted router with "C" axis for 360° horizontal processing; inverter driven (FUJI) at 12,000 - 18,000 RPM. (1) 10-Position ATC tool rack mounted in the LH side of the machine. -- Operator & Machine Control"ESA TRIA 7500" CNC 32-Bit Multiprocessor (100% MS/DOS compatible); 1 MB RAM, 80 MB hard disk.12" Monitor; ergonomic extended keypad with: (18) Function keys; 3-1/2" floppy disk drive; RS-232 serial port can be linked directly to IBM compatible PC.The "TRIA 7500" offers an incredible list of functions from (a) autodiagnostic to (z) zooming.Programs can be transferred via diskette or download by wire is possible. -- Complete with:&#9679 Voltage stabilizer &#9679 208/230/460 V, 3-Phase Autotransformer &#9679 (1) 100 cbm/Hr "BECKER" vacuum pump &#9679 Auto lubrication of guides & "Y/Z" ball screws &#9679 manuals/documents/backup disk -- Actual model is: MORBIDELLI Author 504 STC.

MORBIDELLI AUTHOR 504 R CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Working Cap. "X" Axis 139-3/8" (3,540 mm); "Y" axis 48-3/8" (1,230 mm) for routing & 39.6" (1,008 mm) for boring; "Z" axis 3.1" (80 mm). -- Positioning Speed:"X" Axis 213 FPM; "Y" axis 131 FPM; "Z" axis is 65 FPM. -- Worktable:(8) Adjustable panel supports each with: (3) Vacuum pods; worktable setup for (2) independent working areas. -- Boring Unit:(29) Independent vertical boring spindles forming a T-configuration with: (15) Spindles on the "X" axis and (14) spindles on the "Y" axis.A total of (8) horizontal spindles with: (3 + 3) on "X" Axis; (1 + 1) on "Y" axis. -- Machining:(1) 9 HP (7 kW) Vertically mounted router; inverter driven (FUJI) at 12,000 - 18,000 RPM.(1) 8-Position ATC for Automatic Tool Changer. -- Operator & Machine Control:"NUM CN" Loaded onto a HP, PC Based Controller mounted in separate control cabinet.15" VGA Color monitor and ergonomic keypad. Remote Control Pendant: Allows the operator to move around and still control all the axis movements, speed, and emergency stop.Includes: USB Ports; (2) serial ports RS-232 & RS-242 (requires no 3rd party CAD system for downloading programs). XILOG-PLUS OPERATOR Interface: Offers incredible list of: Functions from (a) Auto. diagnostic to (z) zooming; controlled acceleration & deceleration, encoder feedback, dynamic tool correction via PLC due to active tool wear using space-and-time criteria; programs can be transferred via diskette or downloaded by wire. Equipped with: Onboard mini-CAD with built-in programming for writing circles, ellipses & angles with only a few keystrokes; on-board cycle optimization, on-board calculator, mirror imaging, and repeat imaging. -- Complete with:(1) 100 cbm/Hr Vacuum Pump. -- Actual model is: MORBIDELLI - Author 504 .

MORBIDELLI AUTHOR 504 CNC MACHINING CENTER: -- Specifications Working cap. "X" Axis 122" (3,100 mm);, "Y" axis 48.4" (1,230 mm) for routing, 40.9" (1,041 mm) for boring; "Z" axis stroke 4.5" (115 mm) max. material thickness 3.1" (80 mm). -- Positioning SpeedPositioning speed on: "X" Axis is 213 FPM (65 MPM); "Y" axis 131 FPM (40 MPM); "Z" axis is 65 FPM (20 MPM). -- Work Area:(8) Adjustable panel supports with: (4) Pneumatic lifter roller bars for heavy panels.(8) Pop up front stops; (8) pop up backstops; (2) LH pop up side stops; (2) RH pop up side stops. Each panel support with (3) vacuum cups.Worktable setup for (2) separate working areas. -- Boring Unit(1) 4 HP (3 kW) Motor with (29) Independent vertical boring spindles forming a T-configuration.(15) Independent spindles on the "X" axis and (14) independent spindles on the "Y" axis.Total of (8) horizontal spindles for boring on all (4) edges of the panel: (3 + 3) on the "X" axis & (1 + 1) on the "Y" axis. -- Machining(1) 10 HP (7.5 kW) Vertically mounted router; inverter driven at 12,000 - 18,000 RPM. -- Operator & Machine Control"ESA TRIA 7500" CNC 32-Bit Multiprocessor (100% MS/DOS compatible); 1 MB RAM, 80 MB hard disk.12" Monitor; ergonomic extended keypad with: (18) Function keys; 3-1/2" floppy disk drive; RS-232 serial port can be linked directly to IBM compatible PC.The "TRIA 7500" offers an incredible list of functions from (a) auto-diagnostic to (z) zooming.Programs can be transferred via diskette or download by wire is possible. -- Complete with:&#9679 Voltage stabilizer &#9679 (1) 100 m³/Hr vacuum pump. -- Actual model is: MORBIDELLI Author 504.

MORBIDELLI AUTHOR 600 S CNC MACHINING CENTER (W/ATC/BORING/ "C" AXIS): -- Specifications: Working capacity: "X" Axis is 114" (2,900 mm); "Y" axis 51" (1,300 mm) when routing & 39" (1,000 mm) when boring; "Z" axis stroke is 11" (280 mm); max material thickness is 7" (180 mm). -- Positioning Speed:"X" Axis 262 FPM (80 MPM); "Y" axis 131 FPM (40 MPM); "Z" axis 74 FPM (22.5 MPM); YASKAWA AC Servo motors in all (3) axes. -- Worktable:(8) Vacuum hold-down support rails; (2) adjustable vacuum pods per support; rails have pneumatic locking control; support rails slide on THK guides in the "X" axis for manual positioning.(8) Lifting bars to assist in loading/unloading heavy panels; (8) pop-up backstops; (8) pop-up front stops; (4) pop-up side stops; (2) pop-up center stops: which create (4) separate work zones (four 0/0 points). -- Boring Unit:(1) 5 HP (3 kW) Motors; variable speed from 1,000 – 4,500 RPM with HSK F 63 adaptor. (30) Independent vertical boring spindles: (16) Spindles on the “X” axis & (14) spindles in “Y” axis. (10) Horizontal spindles with: (3 + 3) in “X” axis & (1 + 1) in “Y” axis. -- Machining Units:(1) Vertically mounted 15 HP (11 kW) electro spindle router; inverter driven; variable speed from 1,000 - 18,000 RPM, with HSK F 63 adaptor(1) "C" AXIS for 360° NC controlled Horizontal processing.(1) Additional 9 HP (6.7 kW) electro-spindle router, inverter driven, variable speed from 1,000 - 18,000 RPM with HSK F 63 adaptor.(1) 10-Position Rotary Tool Changer mounted on the machine head for "on the fly" ATC.Both routers are programmable with RH & LH rotation; power & speed controlled by a KEB solid-state inverter with digital technology. -- Operator & Machine Control:PC Front-End with: MORBIDELLI "IXLOG" + "NUM CN" + Windows Operating System.15" VGA Color monitor; ergonomic keyboard & mouse; 20 GB hard drive; 56 K modem; integrated 3Com network card; 128 MB. CD ROM 24X, 3-1/2" Disk drive and (2) serial ports: RS-232 & RS-242. -- “XILOG” Interface offers:Incredible list of functions from: (a) Autodiagnostic to (z) zooming; controlled acceleration & deceleration; encoder feedback; dynamic tool correction via PLC due to active tool wear using space-and-time criteria. Programs can be transferred via diskette or downloading by wire is possible. -- Additionally equipped with: On-board mini-CAD with built-in programming for: Writing circles, ellipses & angles with only a few keystrokes; on-board cycle optimization, on-board calculator; mirror-imaging and repeat imaging. All mounted in separate dust-free control cabinet. -- Complete with: (1) 100 cbm/Hr “BECKER” Vacuum Pump; auto-forced lubrication system; safety bump stops, & safety barriers. -- Actual Model is: MORBIDELLI - Author 600 S