SELCO HSO-128A50 HORIZONTAL AUTO-TIE BALER -- Open end type -- 8" Cylinder -- 50 HP motor -- Infeed opening 36" x 28.5" -- Bale size 30" x 40" x variable -- Bale weight up to 1,200 lbs. (OCC) -- Production capacity 2 to 4.5 tph -- Shear blade -- Hopper size 36" x 28.5" -- Ram face pressure 103 psi -- System pressure 2,400 psi -- Platen force 120,637 lbs -- cycle time 11.5 sec. ( no load)

SELCO Model HL-12-LH HORIZONTAL BALER With Infeed Conveyor• 20 HP Motor • 6"; Main Cylinder• Hopper Opening: 50";x 28";• Cycle Time (No Load): 15 seconds• System Pressure: 2,000psi•Total Compression Force: 56,556 lbs

SELCO HL60-M Horizontal Closed Door BalerSpecifications: -- Full Penetration. -- Motor: 30 HP. -- Cylinder: 8". -- Feed Opening: 60" x 45". -- Shear Blade. -- Bale Size: 48" x 40" x 72". -- Max: 2,100 Lbs OCC. -- Feeding Cleated Motorized Belt Conveyor: 20' L x 36" W. -- Loaded onto your Truck.

SELCO - HLO-608-A40, ...Wide Mouth Auto-Tie Horizontal BalerSpecifications: -- Bale size: 48"; x 40"; x 72"; -- Main motor: 50 HP -- Cylinder: 8" -- Twister motor: 2 HP -- Cooler motor: 2 HP -- (4) Tension cylinders: 5" BoreAvailable NOW!

SELCO - HLO-608-A40, ...Wide Mouth Auto-Tie Horizontal BalerSpecifications: -- Bale size: 48"; x 40"; x 72"; -- Main motor: 40 HP -- Cylinder: 8" -- Twister motor: 2 HP -- Cooler motor: 2 HP -- (4) Tension cylinders: 5" BoreEquipped with: -- Conveyor controls -- Shear bar (tapered & serrated)Available NOW!

SEVEIN - 12KVA, operates on 50 - 60 Hz, ...Transformer with Neutral wire (on 400 V side). -- General-purpose enclosed, European made, 12 KVA, 3-Phase ventilated Autotransformer. -- Primary 400 V, Secondary 208 - 220 V, 50 - 60 Hz.

SHRED-TECH - ST100, ...Dual Shaft ShredderNew in 2019Specifications: -- Motors: (2) 50 HP. -- Cutter width: 1.5" Approx. -- Cutting Chamber: 32" x 60". -- Control Panel. -- Mounted on stand. -- The ST-100 Industrial Shredder is a complex, heavy-duty shredder machine that features a 32"; x 60"; cutting chamber, which enables it to handle a wide range of products as well as bulky wastes. It can tear through some of the tougher loads, such as wooden pallets, metals, hazardous wastes, passenger tires, and more.Once these products go through our shredder, they end up in a smaller, optimum shred size. It works with a large-duty throughput of up to 3 tons per hour, working much more efficiently for the business

SHRED-TECH - ST20, ...Dual Shaft ShredderSpecifications: -- Motor: (1) 20 HP. -- Cutter width: 3/4" Approx. -- Mounted on stand. -- Feed Hopper.

SHRED-TECH - ST50, ...Dual Shaft ShredderSpecifications: -- Motors: (2) 20 HP. -- Cutter width: 1" Approx. -- Cutting Chamber: 20" x 35". -- Control Panel. -- Mounted on stand. -- Feed Hopper: 21" x 40" Opening.Can be shown under power.

SHRED-TECH ST50 DUAL SHAFT SHREDDER With Control PanelSpecifications: -- (2) 20 HP Motors -- 1" Approximate Cutter Width -- Cutting Chamber 20" x 35" -- Control Panel -- Mounted on Stand -- Feed Hopper w/21" x 40" OpeningCan be shown under power

SHRED-PAK - 180, ...Double Shaft ShredderSpecifications: -- (2) 75 HP Motors. -- Hook Knives: 2"; (32) knives. -- Conveyor: 60" Wide x 24 ft. long for feeding or exit. -- Control Panel: 600 - 120. -- Stand.Loaded onto Truck.

SHRED-PAX - AZ-80, ...Shredder -- Dual Shaft Shredder. -- Motors: (2) 40 HP. -- Blades: 1" Width; (26) blades total. -- Crescent Moon Ram Assist. -- Ram rebuilt. -- Loaded onto your Truck.

SIEMENS - 75 KVA,... 480 - 380Y/220 Volt 3-Phase Dry Type TransformerSpecifications: -- General purpose: Intended for power, heating, and lighting applications. -- Enclosure Rating: NEMA 3R ventilated; for indoor or outdoor use. -- Multi-tap (432-504) Primary 480 V (Delta); Secondary 380/220 Volt Y - 60 HZ ventilated. -- Aluminum winding material. -- NEMA Class ANN. -- Catalog # 3F6Y075FCD16.(2) Available; priced per unit; make offer for both!

SIERRA - 700T, ...Shear BalerSpecifications: -- (2) 100 HP Electric Motors -- Preload Table -- Precompression -- Shearing: 14 - 17 Tons per hour -- Baling: 12 - 14 Tons per hour -- Logging: 15 - 17 Tons per hour -- Cylinders: (1) Main Compression ram; (6) folding box rams. -- Cylinder forces: Shear - 700 tons precompression; 115 tons main compression; 160 tons folding box; (6) cylinders @ 80 tons each; 240 tons each side. -- Folding Box Dimensions: 19 ft., 8 in. x 7-2/3 ft. Open: 19 Ft., 8 in. x 32 in. x 24 in. Closed: 34 In. x 22 in.Shear Throat

SIERRA - 700T, ...Shear BalerSpecifications: -- (2) 100 HP Electric Motors -- Preload Table -- Precompression -- Shearing: 14 - 17 Tons per hour -- Baling: 12 - 14 Tons per hour -- Logging: 15 - 17 Tons per hour -- Cylinders: (1) Main Compression ram; (6) folding box rams. -- Cylinder forces: Shear - 700 tons precompression; 115 tons main compression; 160 tons folding box; (6) cylinders @ 80 tons each; 240 tons each side. -- Folding Box Dimensions: 19 ft., 8 in. x 7-2/3 ft. Open: 19 Ft., 8 in. x 32 in. x 24 in. Closed: 34 In. x 22 in.Shear Throat -- Disassembled approx 3 years ago --Running when removed from service

AAF PULSE-PAK 21-3H Pulse-Jet Cartridge Dust Collector. (3H) is three-high filter elements. (21) is the total number of Panel Pak V's.The Panel Pak filter element has two flat panels of pleated media in a Vee-Configuration allowing installation and change-out with minimum time and effort. Each cartridge has its own gasket ensuring a positive, air tight seal. -- Consists of two modules: one containing (9) 3x3 filters and the second contains (12) 4x3 filter cartridges, for a total of (21) cartridges. -- Housing dimensions: 191.75" High (with 48" hopper clearance), 104.25" Wide, 94.25" Depth, and Weighs about 6,400 Lbs. -- Air consumption about 6 cubic feet/hr. at 90 PSI of clean dried air. -- Fan and Airlock available at extra cost. please inquire.

ACROWOOD 8' x 12' High Volume Chip Screen;Complete with the following features: -- Dual Drive, --Suspended, --The latest design screen. --Makes 3 separations. --Top screen is 2"; square hole, bottom screen is ¼"; round hole. --Was running fine when removed from service. --Price shown includes shop going through the machine to inspect, complete any needed repairs, test, clean and paint prior to shipping. Freight dimensions: 10’7"; wide x 18’ long x 6’ high. Total weight is approximately 10,000 Lbs.

ACT 3-6 Cartridge Dust Collector Cartridge style downward flow dust collector rated at 4,000 CFM. Specifications: -- Blower, 10 HP rated at 4,000 CFM @ 10" w.c. -- Holds (6) Nano Elite, merv 15, cartridge filters with up to 1,524 sq. ft. of filter media that are 99.9% efficient. -- Pulse control timer board with built-in digital pressure gauge. -- Drum lid with latch kit, quick-lock easy-access filter doors. -- Magnetic motor starter panel. -- (6) Filter Upgrade to ACT Nano-Elite, flame-retardant, Nano-Fiber media with industry best Merv 15 efficiencyEquipped with: -- Pulse control timer board with built-in digital pressure gauge. -- Automatic reverse jet cleaning via compressed air, (1) pulse valve per (2) cartridges for a total of (3) pulse valves. Goyen solenoids and diaphragm. -- Heavy Duty steel legs position unit approximately 4' above the ground made with 7 and 10-gauge construction. -- 12" in-letOptions: -- Fan outlet silencer. 10 year manufactures materials and craftsmanship warranty . Made in the USA

ACT 4-16 Cartridge Dust Collector Cartridge style downward flow dust collector rated at 8,000 CFM. Specifications: -- 20 HP Direct drive, top mounter blower rated at 8,000 CFM @ 10" w.c. -- (16) Nano Elite, flame-retardant, Nano-Fiber merv 15, cartridge filters with up to 4,064 sq. ft. of filter media that are 99.9% efficient. -- Pulse control timer board with built-in digital pressure gauge. -- Drum lid with latch kit, quick-lock easy-access filter doors. -- Magnetic motor starter.Equipped with: -- Automatic reverse jet cleaning via compressed air, (1) pulse valve per (2) cartridges for a total of (8) pulse valves. Goyen diaphragm and solenoid valves -- Heavy Duty steel legs position unit approximately 4' above the ground made with 7 and 10-gauge construction. Options: -- Fan outlet damper. -- Fan outlet silencer. -- All in one - Starter / disconnect / timer board / pressure gauge Other models available, please check with the Product Manager10 year workmanship and materials warranty -- Made in the USA

ACT 3-12 Cartridge Dust Collector Cartridge style downflow dust collector rated at 5,800 CFM. Heavy-duty with 7 and 10 gauge construction. Specifications: -- Blower, 15 HP rated at 5,800 CFM. -- (12) Nano Elite, MERV 15, cartridge filters with 3,046 sq. ft. of filter media that are 99.9% efficient. -- Reverse pulse filter cleaning system. -- Pulse control timer board with built-in digital pressure gauge. -- Drum lid with quick-lock easy-access filter doors. -- Magnetic motor starter and disconnect. -- 16" inletEquipped with: -- TCBI 15 HP Blower with direct drive, top mount. -- Automatic reverse jet cleaning via compressed air, (1) pulse valve per (2) cartridges for a total of (6) pulse valves. Goyen solenoids and diaphragm. -- Heavy Duty steel legs position unit approximately 4' above the ground made with 7 and 10-gauge construction. -- Drum Lid Latch Ring -- 10 year workmanship and materials warranty -- Made in the USA