HARRIS PIRANHA Full Closed Door Horizontal BalerSpecifications: -- Cylinder: 10" -- Main motor: 20 HP -- Feed opening: 56" x 36"Equipped with: -- Full Pen

HARRIS HRB-8/NF Two-Ram Horizontal Baler with ConveyorSpecifications: -- Cylinder: 12" -- Main motor: 100 HP -- Ejection cylinder: 8" -- Bale size: 45”W x 31”H x 64”L -- Charge box opening: 57”W x 110”L -- Hopper Opening: 74”W x 132”L -- In-feed belt conveyor width: 72"Equipped with: -- Upgraded PLC (Allen Bradley) with optical sensors -- Wide Steel Belt in-feed conveyor 72" wide

HARRIS HAL-60NF-FE-FP NON-FERROUS Closed Door Horizontal Baler with ConveyorSpecifications: -- Main cylinder: 10" -- Main motor: 75 HP -- Bale size: 45" x 30" x 60" -- Feed opening: 60" x 54" -- Door cylinder: 5" -- Cycle time: 15 sec (no load)Equipped with: -- 48"W Steel Pan Infeed Conveyor

HARRIS HLO-608-AR30 Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8" -- Feed opening: 60" x 45" -- Main motor: 30 HP -- Bale size: 48" x 40" x VariableEquipped with: -- Auto-Tie system -- Automatic cycle

HARRIS - CENTURION, ...Horizontal BalerSpecifications: --Motor: 150HP --System Pressure: 3,500psi --Main Ram Face Pressure: 280psi --Ejector Ram Face Pressure: 209psi --Bale Size: 45" x 31" x 64" --Hopper Opening: 86" x 114.5' --Charge Box Opening: 57.5" x 105.5" --Comes equipped with a L&P Wire Tier. --Feed Conveyor priced on request (not included)

HARRIS/SELCO HLO-60AREB HORIZONTAL AUTO-TIE BALER --Motor: 2 – 100 HP --Cylinder: Rebuilt 12″ --Hopper: 80″ Long --Hours of Operation: 14,000 --Tons Per Hour/OCC: Up to 26 Tons --Includes 72″ Mayfran Steel Belt Feed Conveyor

Selco HSO-170AR30 Auto TIre Baler• 20 HP Motor• 7” Main Cylinder• Bale Size: 30” x 36” x (variable)• Cycle Time (No Load): 23 seconds• Main Ram Face Pressure: 74psi• System Pressure: 2,250psi• Total Compression Force: 86,590 lbs

HARRIS-SELCO " HLO-608AR50" OPEN END AUTO-TIE HORIZONTAL BALER -- 50 HP motor -- 8" Cylinder with 80" stroke -- Infeed opening 45" x 60" -- Bale size 48" x 40" x variable -- Bale weight up to 1,800 lbs (OCC) -- Production capacity up to 6 tph -- Shear blade -- Platen force 113,100 lbs -- Completely refurbished --Warranty 180 Day - Parts/Labor Warranty -- Loaded on your truck

HARRIS SELCO HSO-127A30 AUTO-TIE Horizontal BalerSpecifications: -- Cylinder: 7" -- Charge box opening: 36" x 28" -- Bale size: 30" x 40" x Variable -- Main motor: 30 HP -- Cycle time: 17 sec (no load) -- Platen force: 86,590 LbsEquipped with: -- Operator control panel -- Bale cutting shear

HARRIS/SELCO - HRB-616N-BR-BD, ...2-Ram Horizontal BalerReconditioned with 12-week lead time.Specifications: -- Cylinder: 12" -- Eject Cylinder: 9" -- Main motor: 100 HP -- Hopper opening: 52″ x 80" -- Up to 1,350 Lb OCC Bales -- Up to 9 Tons OCC per hourReconditioned: -- New floor -- Pumps -- Cylinder packing -- New knives -- New holddown bars -- Much more! ...Ask me!

HARRIS - HRB-EHD-T100, ...2-RAM Horizontal Baler -- Model: Centurion -- Motors: (2) 100 HP -- Main cylinder: 13" -- Eject cylinder: 9" -- Wire: New Accent 470 Wire Tier -- Eject: Left Hand -- Power Unit: Right Hand -- Came out of use: RunningLoaded onto your Truck

HARRIS - CENTURION EHD, ...Horizontal Baler -- Bale Separation Door -- Hours: 23,269 ( at time of reading) -- Motors: 200 HP (2 x 100 HP) -- Bale Size: 45" x 30" x 63" -- Hopper Opening: 86" x 105" -- Upgraded Pumps to New Oil Gear 2020 -- New Remanufactured Cylinder 2021 -- Accent Wire Tier 340 -- Came out of Production: November 2022 -- Conveyor NOT Included -- Loaded onto your Truck!

HENDRICK PRO V Dust CollectorSpecifications: -- 5 HP, 2,500 CFM. -- (2) High Efficiency 1/8" thick needle felt cloth bags up and (2) collection barrels down -- Complete with: Direct drive centrifugal fan assembly with 5 HP TEFC motor non-sparking Heavy Duty cast aluminum impeller; (4) inlets, motor starter

HMC - Separator, ...Eddy Current Multi-Separation SystemSpecifications: -- Countering conveyor: 55" x 10". -- Bucket Elevator: 10" x 5'. -- Main motor: 0.37 kW.Equipped with: -- Push button control. -- Carrier with skates.

HMC 2-Saw Trimmer Model ET-10,;Complete with the following features: --16′ capacity. --Push Button Setworks. --Left hand (feeds from left to right). --Cuts up to 8″ thick. --Belt Conveyor for waste.NOTE: Removed from service and it was running just fine at the time of removal. Stored outside.

HURST 600 HP Waste Fired Boiler; -- Specifications:Complete in-place system with the following features: -- Decommissioned July 2019. -- 150 psi. (300 psi max wp), -- 20,700 lb per hour. -- Fuel House, Boiler Building and all Controls -- System has been "pickled" to maintain tube integrity.

HUSTLER - FC-2, ...ScreenSpecifications: -- OD at the longest point: 104" -- Long at longest point: 122" -- Tall at the tallest point: 65"Equipped with: -- (2) Shutoff switches

HUSTLER - 48", ...Inclined Infeed Cleated ConveyorThis Conveyor is "New, Never Used," and stored outside. Specifications: -- Width: 48 In. -- Horizontal load area: 8 Ft. -- Inclined height: 21-1/2 Ft. -- Total length: 31-2/3 Ft. -- Main motor: 5 HPEquipped with: -- Oiler -- Cleated

IBC TR-13-150 2-Ram Horizontal BalerSpecifications: -- Main Bore: 13" -- Eject Cylinder: 9" -- Horsepower: (2) 75 HP Each -- Feed Opening: 58" x 88"

INGERSOLL RAND - RS30IE-A125, ...40 HP Screw Compressor40 HP Motor, 196 CFM @ 115 PSI; totally integrated package.Specifications: Single-stage rotary screw air-end; max. modulate pressure 118 PSI; full sound enclosure keeps noise levels below (75) dBA. -- Equipped with: -- Microprocessor based control system, premium instrument panel, air-to-air 2-stage aftercooler, electronic stepper motor inlet air control, sealed SSR direct drive gear train, total positive lubrication system with spin-on filter. -- Control System: -- Finger touch membrane panel, LED diagnostic readout with (8) operating conditions, (12) programmable operating parameters, (4) fault warnings, and (11) fault shutdowns. Approx. (23,000) Total operating hours.