INTERNATIONAL MT-4843 Manual-Tie Horizontal Baler With Infeed ConveyorSpecifications: -- Cylinder: 8" -- Opening size: 60" x 46" -- Main motor: 40 HPEquipped with: -- Control panel -- Oil Cooler – Air-Over-Oil -- 10' Bale Run-Out Table -- High-Temp/Low Oil Level Shutdown -- 48" x 43" x 60" Bale Size

INTERNATIONAL - IB-4430-60-HD, ...Automatic Tie Horizontal BalerSpecifications: -- Bale size: 44" x 30" -- Hopper opening: 42" x 60" -- Cylinder bore: 8" -- Cylinder stroke: 82" -- Tension cylinder: 6" -- Cycle time: 15 Sec (no load) -- Ram force: 150,800 Lbs -- Main motor: 40 HPEquipped with: -- Oil cooler

IBC Horizontal Closed Door Baler Model NA-1296A-48 -- 50 HP Motor --10″ Main Cylinder --Bale Size: 30″ x 45″ x 60″ --Hopper Size: 57″L x 45″W --Platen Pressure: 134 PSI --System Pressure: 3,000 PSI --Total Force: 235,620 lbs --New cylinder installed approximately 6 months ago

INTERNATIONAL BALER - IB-4430-50, ...Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8". -- Ram force: 125,660 Lbs. -- (6) Tension cylinders: 4" Bore. -- Feed opening: 42" x 50". -- Main motor: 40 HP.Equipped with: -- Shear blade with adjustable striker bar. -- Regin hydraulics. -- LED Indicators for bale functions. -- Autostart electronic beam. -- Oil cooler. -- Replaceable T-1 floor.NOTE: Ram needs some repair.

INTERNATIONAL - NA-1295HD, ...Closed Door Horizontal BalerSpecifications: -- Bale size: 72" x 44" x 36" -- Main cylinder bore: 8" -- Total force: 113,000 Lbs -- Ram face pressure: 71 PSI -- Feed opening: 42" x 50" -- Cycle time: 30 sec -- Main motor: 30 HPFeatures: -- PLC Control -- Bale table -- Shear bar -- Heavy-duty welded construction -- Heavy-duty hydraulic system -- Easy-to-operate controls

INTERNATIONAL BALER - 1296, Wide-Mouth Closed Door BalerSpecifications: -- Cylinder: 8". -- Feed opening: 60" x 42". -- Bale size: 44″ x 36″ x 72″. -- Power unit: 40 HP.

INTERNATIONAL - 1272-HD, ...Horizontal Closed BalerNOTE: Complete with Fluffer!SPECIFICATIONS: -- Bale Size: 72" x 30" x 36" -- Main Motor: 30 HP -- Cylinder: 7" -- Feed Opening: 50" x 28" -- Total force: 86,500 Lbs -- Cycle Time: 23 Sec -- Shipping weight: Approx. 8,500 LbsFeatures: -- Single Fluffer -- Hopper is included

IPS - AT-752-20, ...Horizontal Auto-Tie BalerReconditioned Baler ready to handle your recycling needs! Specifications: -- Main cylinder: 7″ -- Tension cylinder: 6″ -- Bale size: 43″ x 43″ x Variable -- Charge box opening: 41″ x 50″ -- Total force: 115,400 Lbs -- Motor: 20 HP -- System pressure: 3,000 PSI -- Ram Face pressure: 63 PSI -- Oil reservoir: 125 Gallons

IPS - AT-752-50, ...Horizontal Auto-Tie BalerSpecifications: -- Charge box opening: 41" x 50" -- Main cylinder bore: 7" -- System pressure: 3,000 PSI -- Total force: 115,400 Lbs -- Ram face pressure: 63 PSI -- Tension cylinder bore: 6" -- Main motor: 50 HP -- Bale size: 43 x 43" x Variable length -- Bale weight: Up to 1,525 Lbs -- Bale volume: 66 Cu/Ft -- Cycle time: 20 SecFeatures: -- Hopper access door with safety interlock -- Oil Cooler

IPS - AT-872-50, ...Horizontal Open-End BalerSpecifications: -- Auto-Tie Model• 50 HP Motor• 8” Main Cylinder• Hopper Opening: 46”x 60”• Bale Size: 43” x 48” x (variable)• Main Ram Face Pressure: 74psi• System Pressure: 3,000psi• Total Compression Force: 150,800 lbs

IPS - AT-874-100, ...Auto-Tie Horizontal BalerSpecifications: -- Main Cylinder: 8” Bore -- Bale size: 43" x 43" x variable -- Main motor: 100 HP -- Production capacity: up to 11 TPH (OCC) -- Bale tension cylinder: 6" -- Bale weight OCC: Up to 1,580 Lbs -- Conditioned news: Up to 1,775 Lbs -- Cycle time: 15 Sec -- Oil Reservoir Capacity: (400) gallons -- System Pressure: 3,000 PSI -- Platen Force: 150,700 lbs. -- Ram Face Pressure: 83 PSIEquipped with: -- Programmable PLC controls -- 0 - 15 Sec adjustable time delay -- Precompression lid

IPS - AT-965-HS100s, ...Horizontal Open-End BalerSpecifications: -- Auto-Tie Model -- Motor: 100 HP -- Ram cylinder: 9" -- Push cylinder: 7" -- Ram force: 190,800 Lbs -- Feed opening: 54" x 60" -- Hinge side -- This Baler is a high-speed Auto-Tie with a Hinge Side (large feed hopper for large material 66" x 60"), multi-material Baler. High grade 25 TPH, OCC 15 TPH, aluminum cans 7 tph, HDPE 4.7 tph, PET 4.2 TPH, tin 25 TPH. -- Automatic operation has a 1,000 Lbs baling Wire System for higher production and longer operating systems before you have to change wire.Conveyor NOT included.

IPS - CD-751, ...Closed Door Horizontal BalerSpecifications: -- Bale size: 72" x 42" x 42" -- Main cylinder: 7" Bore -- Door cylinder: 4" Bore -- Main motor: 30 HP -- Charge hopper height: 90" -- Hopper opening: 40" x 50" -- Bale weight: Up to 1,700 Lbs -- Total force:115,400 Lbs -- Ram face pressure: 65 PSIFeatures: -- AR400 Alloy steel shear blade -- Steel floor with replaceable bearing strips -- 24 Volt control circuits -- Welded Frame, heavy reinforced channel & plate

JV MANUFACTURING - HE-60 BIG MOUTH, ...Closed-Door Horizontal BalerSpecifications: -- Cylinders: (2) 6" -- Main motor: 20 HP -- Bale size: 60” x 30” x 48” -- Feed opening: 18,000 LbsEquipped with: -- Conveyor hopper -- Factory infeed conveyor -- Full penRefurbished work. New: Guides, press head cover, main door hinge pin, main door patch pin, oil & filters, hoses as required, seals in control manifold, belt on conveyor, drive chain, and sprockets on conveyor.Rebuilt: Cylinders, door latch cylinder, shear blades sharpened and adjusted. - Gear oil changed in conveyor drive.

JV MANUFACTURING HE-60 BIG MOUTH Closed-Door Horizontal BalerSpecifications: -- Cylinders: (2) 6" -- Main motor: 20 HP -- Bale size: 60” x 30” x 48” -- Cycle Time (No Load) – 47 seconds -- Platen Force – 120,600 lbs normal - 140,800 lbs max -- Hydraulic Cylinder Bore Diameter: 8” -- Hydraulic Cylinder Stroke: 84” Equipped with: -- Conveyor hopper -- Heavy duty operator controlsNote: back cover is included.

JV MANUFACTURING - PH-04, ...Pre-Crusher CompactorSpecifications: -- Hydraulic Cylinder: 7" -- Charge Box Capacity: 4 Cu.yd -- Cycle Time: 56 Sec -- Total Force: 77,000 Lbs -- Ram Face Dimensions: 60" x 35" -- Motor: 20 HPEquipped with: -- Rear Deck

JV MANUFACTURING SC-T2-34 Self-Contained Compactor with Cart TipperSpecifications: -- Feed opening: 58" x 41" -- Cylinder: (2) 4" -- Main motor: 10 HP -- Capacity: 34 yd.Equipped with: -- Rear hydraulic Cart Tipper -- Universal rails

JV MANUFACTURING MODEL CC-02, ...Stationary CompactorSpecifications: -- Charge box capacity: 2 Cu/Yards -- Clear Top opening: 40"x 58 1/2" -- Average cycle time: 63 Sec -- Total normal force: 56,500 Lbs -- Max. total force: 67,900Lbs -- Normal ram pressure: 33 PSI -- Max. ram pressure: 39.7 PSIEquipped with: -- Standard 3-button controls -- Heavy-Duty structural steel components and welded by AWS Certified Welding TechniciansDesigned for: &#9679 Retailers &#9679 Hospitals &#9679 Hotels &#9679 Distribution Centers &#9679 Manufacturing Centers &#9679 Recycling Centers &#9679 Home Centers

(2) JV MANUFACTURING - VB-60-B & VB-72-B, ...Vertical Balers Lot: (2) Vertical Balers in great working condition!Specifications: -- Cylinder: 6" -- Main motor: 10 HPEquipped with: -- ANSI Z245.5 Compliant -- Key operated controls -- Quiet operating Vane Pump -- Gas spring assisted Loading Door

JV MANUFACTURING - VB-60B, ...Vertical BalerSpecifications: -- Bail size: 60" x 30" x 49" -- Bale weight (up to): 1,000 Lbs -- Cylinder: 6" -- Cylinder stroke: 44" -- Feed opening height: 24" -- Load height: 52" -- Main motor: 10 HP -- Platen force: 59,370 Lbs -- Platen face pressure: 45 PSI -- Average cycle time: 53 SecNOTE:: Refurbished and in great working condition with free loading onto your truck.