(3) CRAM-A-LOT - SCR-T2-34, ...34 Yard Self-Contained CompactorsLot of (3) Specifications: -- Cylinder: (2) 4" -- Main motor: 10 HP -- Feed opening: 41″ x 58″ (1,041 mm x 1,473 mm) -- Capacity: 34 Yard -- Ram force: Up to 24 tons

Cram-A-Lot HX-60, ...Closed Door Baler with Cart Dumper and Infeed ConveyorSpecifications: --The CRAM-A-LOT HX-60 HH & HX Series Balers are ideal for warehouses and designed for ease of installation, operation, and maintenance. --The CRAM-A-LOT® HH & HX Series Balers are built with extra heavy-duty construction and are ideal for warehouses and recyclers who deal with large quantities of corrugated and paper products.This machine is designed for long hours of operation and can operate either manually or automatically with photocell control. Optional custom-engineered feed conveyors and cart dumper systems efficiently control baler feed rates for optimum performance in a complete baling system.Standard features include:ANSI Z245.5 Compliant - All compactors meet or exceed ANSI Z245.5 safety standards.UL/CUL Listed Control PanelsUHMW Ram Shoes - Adjustable to assure straight tracking and readily replaceable, should the need ariseOil Sight Gauge - Oil level at a glanceOil Filter - Replaceable spin-on cartridge to keep your oil cleanHeavy Duty Controls - NEMA 4-rated pushbutton controls with key-lockable start switchAutomatic Single-Cycle Operation --Bale Size: 60" x 30" x 40" -- Bale Weight Up To (OCC) 1400 Lbs --Throughput (OCC) 2.5 bales /Hr -- 7" Cylinder

DAC-1200 DENSACAN - Can Denisfier -- The DAC-1200 is a fully automatic and will run continuously as long as cans are being fed. It features an automatic shut-off when empty. -- Capacity in pounds/hour; Aluminium 1,200 Lbs, Aluminium flat 2,000 Lbs, Ferrous 2,500 Lbs. -- Biscuit description: Typical size; 11" x 13" x 9" -- 20 HP motor

DAC-1200 DENSACAN - Can Densifier with Infeed Conveyor -- The DAC-1200 is a fully automatic and will run continuously as long as cans are being fed. It features an automatic shut-off when empty. -- Capacity in pounds/hour; Aluminium 1,200 Lbs, Aluminium flat 2,000 Lbs, Ferrous 2,500 Lbs. -- Biscuit description: Typical size; 11" x 13" x 9" -- 20 HP motor --Can Densifier with Infeed Conveyor

DENS-A-CAN DAC-600 Can DensifierSpecificationsAll DENS-A-CAN Densifiers feature high-quality hydraulic components, advanced manifold construction, and straight-thread O-ring fittings to minimize leakage. The DAC 600 is fully automatic and will run continuously, as long as cans are being fed. It features an automatic shut off when empty.Direct Charge is the processing of cans without the need for any preprocessing like pre-weighing. The DAC 600, like all DENS-A-CAN Densifiers, can be placed directly beneath a surge storage system.Can bridging is eliminated by the use of an agitator. The agitator rotates when the single compression ram is retracting; the rotating agitator breaks bridging and forces the cans into the compression chamber. The DAC 600 is fully assembled and mounted on casters to allow for easy cleanup. After the tank is filled with oil and electricity is run to the machine, it is ready to operate!All service areas of the DAC 600 have ample access. All wear components are bolted and designed for easy replacement.Capacity in pounds/hour: -- Aluminum: 600 --Aluminum Flat: 800 -- Bi-Metal: 1,020 -- Biscuit Description: -- Typical size: 8' x 10' x 11' with integral banding grooves. -- Weight and density of a typical biscuit: -- Aluminum cans- 20/22 lbs. each or 40/43 lbs./cu. ft. typical. -- Bi-Metal cans - 35 lbs. ea or 70 lbs./cu. ft. typical. -- Banded Bundle typical size and weight: 125 Biscuits, 40' x 50' x 55; no skid or pallet needed. -- Aluminum beverage cans: 2,500 Pounds -- Bi-Metal cans: 4,375 Pounds -- 40' Trailer capacity: (18) Bundles. -- Standard Power: 10 HP - 240 V, 3-Phase, 40 Amps -- Approx. weight with conveyor: 2,600 Lbs -- Hydraulic reservoir capacity: 30 Gallons

ECONOMY BALER - 5042E840F, Auto-Tie Open-End Horizontal Baler with ConveyorSpecifications: -- Cylinder: 8" -- Main motor: 40 HP -- Feed opening: 50" x 42" -- Bale size: 40" x 40" variable -- OCC Bale weight: 1,700 - 2,000 LbsEquipped with: -- Infeed Conveyor -- Open-End

ECONOMY - 60M36, ...Horizontal BalerSpecifications: -- Bale size: 60” x 36” x 30” -- Feed opening: 30” x 28-1/2” -- Cylinder: 6” -- Motor: 20 HP

EXCEL - 2R10, ...Horizontal Auto-Tie BalerSpecifications: -- Main cylinder: 10” -- Eject cylinder: 9”; 6” Bore -- Cycle time: 16 Seconds -- Bale size: 60” x 45” x 30” -- System pressure: 3,000 PSI -- Oil reservoir: 600 Gallons -- Platen force: 235,619 Lbs -- Main motor: (2) 50 HPEquipped with: -- U.S. Wire Tie -- Standard with either left-hand or right-hand eject -- Operator-free operation -- 50 HP TEFC Motor -- "EXCEL Autonetics" with absolute RAM position sensor with electronic display -- U.S. Wire Tie Systems "Automatic 342 Tier" with Turbo Motor -- Industrial Hardened Logic Controller -- Fully lined with: AR "Hardox 400" Replaceable wear liners -- 300-Gallon Hydraulic Reservoir with: Regenerative Circuit (600-gallon 2R10) -- Upper & lower photo eyes (sender/receiver upper photo eye with: Integrated Conveyor control) -- NEMA 12-Rated enclosures and controls with conveyor starter -- CASTELL Key Safety Interlocking Entry System -- Bale Chamber penetration: 2R9 - 27 In.; 2R10 - 24 In. -- Automatic bale release door -- Automatic shear jam correction

EXCEL 2R10 Horizontal Auto-Tie Baler with ConveyorSpecifications: -- Main cylinder: 10” -- Eject cylinder: 9”; Bore 6” -- Cycle time: 16 Sec -- Bale size: 60” x 45” x 30” -- System pressure: 3,000 PSI -- Oil reservoir: 600 Gallons -- Platen force: 235,619 Lbs -- Main motor: (2) 50 HPEquipped with: -- Bale Discharge Platform -- Steel Belt Feed Conveyor -- Automatic bale release Door -- US Wire Tie -- Standard with either left-hand or right-hand eject -- Operator-free operation -- 50 HP TEFC Motor -- EXCEL Autonetics with absolute RAM position sensor with Electronic display -- US Wire Tie Systems - Automatic 342 Tier with Turbo Motor -- Industrial Hardened Logic Controller -- Fully lined with Hardox® 400 replaceable wear liners -- 300-gallon Hydraulic Reservoir with regenerative circuit (600-gallon 2R10) -- Upper & lower photo-eyes (sender/receiver upper photo-eye with integrated Conveyor control) -- NEMA 12 Rated enclosures and controls with Conveyor starter -- CASTELL key safety interlocking Entry System -- Bale Chamber penetration (S2R9: 27”; 2R10: 24”) -- Automatic bale release door -- Automatic shear jam correction -- Bale discharge platform

EXCEL - 2R10, ...Horizontal Auto-Tie BalerSpecifications: -- Main cylinder: 10” -- Eject cylinder: 9”; 6” Bore -- Cycle time: 16 Seconds -- Bale size: 60” x 45” x 30” -- System pressure: 3,000 PSI -- Oil reservoir: 600 Gallons -- Platen force: 235,619 Lbs -- Main motor: (2) 50 HPEquipped with: -- U.S. Wire Tie -- Standard with either left-hand or right-hand eject -- Operator-free operation -- 50 HP TEFC Motor -- "EXCEL Autonetics" with absolute RAM position sensor with electronic display -- U.S. Wire Tie Systems "Automatic 342 Tier" with Turbo Motor -- Industrial Hardened Logic Controller -- Fully lined with: AR "Hardox 400" Replaceable wear liners -- 300-Gallon Hydraulic Reservoir with: Regenerative Circuit (600-gallon 2R10) -- Upper & lower photo eyes (sender/receiver upper photo eye with: Integrated Conveyor control) -- NEMA 12-Rated enclosures and controls with conveyor starter -- CASTELL Key Safety Interlocking Entry System -- Bale Chamber penetration: 2R9 - 27 In.; 2R10 - 24 In. -- Automatic bale release door -- Automatic shear jam correction

EXCEL EX-62 Horizontal Closed Door Baler With Infeed ConveyorSpecifications: -- Feed Opening: 54" x 35" -- Main motor: 20 HP -- Cylinders: (2) 6" -- Total Ram Force 159,400 lbsFeatures: -- Infeed rubber conveyor: 48" -- 3" Cleats -- Removable shear blade -- Tongue and groove floor -- Full Penetration -- Loaded on your truck

EXCEL - 2R10, ...2-Ram Horizontal Baler with Infeed ConveyorSpecifications: -- Main motor: (2) 50 HP -- Main cylinder: 10” -- Eject cylinder: 9” -- Pit section length with incline: 20’Equipped with: -- US Wire Tier -- Steel belt feed conveyor

EXCEL EX60(Non-Ferrous) Horizontal Closed Door Baler With In Feed ConveyorSpecifications: -- Motor: 20 HP. -- Cylinder: 9". -- Ram Force: 190,851 Lbs. -- Feed Opening: 40" x 55". -- Full Bale Chamber Penetration. -- Wear Liners: Hardrock 400 -- Automatic Shear Jam Correction.Price includes Loading onto your Truck.

EXCEL 2R63 2-Ram Horizontal BalerSpecifications: -- Main Cylinders: Twin 6" -- Eject Cylinder: 6" -- Main motor: 20 HP -- Cycle Time: 29 Sec -- Overall Force: 159,467 Lbs -- Feed Opening: 60" x 54" -- Bale Size: 60" x 48" x 30"Equipped with: -- U.S. 343 13 Gauge Wire Tier

GREEN - 60" X 27', ...Steel Belt Type ConveyorSteel Belt Feed Conveyor -- Width: 60" -- Length: 27 Feet -- Lower Horizontal: 10-1/2 Feet -- Drop Off: 10 Feet -- Working: Fine -- Loaded onto your Truck

GREENMAX - EPS-AC-100, ...Cold Press DensifierSpecifications: -- EPS Polystyrene Foam Densifier -- Ratio: 50 to 1 -- Volume: 220 Lbs/Hr -- No Conveyor -- Loaded ont your Truck

GREENMAX C100 SCREW COMPACTOR with Infeed ConveyorSpecifications: •Screw compression technology, Lower utility consumption, and higher efficiency•Able to deal with fish boxes that contain water•CE approved and comply with UL/CSA standards•A speed control device is designed to prevent EPS from melting•Reputable & High-quality components make the machine reliable and durable•SIEMENS control system guarantees easy and simple operation. --Capacity 220lbs/hr

(8) HARMONY - M60-CB, ...Vertical BalersLot of (8) Balers: Loaded on your truck!Specifications: -- Bale size: 60" x 30" x 48" -- Cylinder: 6" x 48" -- Motor: 5 HP -- Hi/Lo Power Unit

HARMONY T60-XDRC Vertical BalerSpecifications: -- Motor: 20 HP -- Large 10" Cylinder with Twin Torque Tubes -- Bale Size: 30" x 60" x 48" -- Feed Opening: 25" x 60" -- Ram Force: 235,620 LbsEquipped with: -- Conveyor Over the Back: 48" -- Loaded on your Truck!

(4) HARMONY - M60-CB, ...Vertical Balers with (1) PTR 3400-HD. ...Vertical BalerLot of (5) Vertical Balers; with free loading onto your truck.Specifications:Cylinder: 6"Power unit: 10 HP