ELGI EN04-125 5 HP ENCAP Series Rotary Screw Compressor; 19.3 CFM @ 125 PSIG Equipped with: -- Efficient air filtration system where air enters through a pre-filtered enclosure. -- After cooler is standard on all models to enable high efficiency TEFC, Super E, 5 HP motor operation up to 115°F ambient temperature.Complete with: -- "Neuron" controller that has been custom designed and engineered to monitor and control overall performance. -- Includes service indicators, fault alarms, safety shutdowns and a service / operational log feature for real-time feedback. -- Phase monitor, auto re-start and the ability to hook up to a RS 485 connection to monitor system remotely.Includes: -- 3-Stage efficient air-oil separation (less than 2 PPM). -- Single door access to routine maintenance points. -- Spin-on oil filter and separator elements for fast and easy routine service.6-Year Air End Warranty. - UL/cUL certified to ensure high levels of safety. -- (230 volt, 1-phase option available).

ELGI AB37V Oil-Free 50 HP Screw Air Compressor with Mikropor Refrigerated Air DryerWith the ELGi AB "Always Better" series, we bring you a disruption in oil free compressed air technology. Every ELGi AB series customer across the world is assured of zero risk of contamination in the compressed air. Our customers are assured of guaranteed emission reduction while ensuring class zero air, free of oil residue, at all times.Specifications: -- Horsepower: 50 -- Working Pressure PSIG: 100-150 -- Outlet Connection: 1-1/2" NPTIncluded: -- Mikropor Refrigerated Air Dryer - MK-US-250 -- 240 Gallon Tank + Kit: -- WaterHog Pneumatic Zero Loss Drain LH50-OLAAWCompressor Equipped with: -- Variable Speed Controls -- Two Stage Air Filtration -- Advanced Neuron III Controller -- Industrial Sound Enclosure -- Robust Cooling System -- Elimination of Oil Cooler with Water Injected Rotor Screws -- Three Stage Water Separation -- Low Operating Temperatures -- FDA Approved SS with Corrosion Protection -- Closed Loop Water Circuit -- Food Grade Approved Anodized Aluminum Housing -- Double Gear Case Design, Both Ends of Screw assembly -- Precision Machined, Hardened, Gear Case Gears. Balanced to ReduceRefrigerated Air Dryer Specifications: -- Air Cooled Refrigerated Compressed Air Treatment Package - With Integral Preand After Filters -- Air Quality ISO 8573.1 Class 1,4,1 Package -- 1-micron Particulate On Board Pre-Filter Included (GKO-US 700MX) -- 0.01-micron Coalescing On Board Post-Filter Included (GKO-US 700MY) -- 250 scfm Rated @ 40°F Dewpoint -- Performance Based on Customer Site Conditions -- Performance Based on 100°F Ambient Temp/100°F Inlet Air Temp/100psig -- 1.8 psi Pressure Drop Across MKUS-250 -- Reduces Air Compressor Energy Operating Costs -- R-134A Refrigerant

ELGI EGRD 300 Refrigerated Air Dryer (300 CFM)The ELGi EGRD 300 refrigerated dryer is designed to provide a constant 41ºF dew point and utilizes the latest advancements in refrigeration technology to provide low operating cost and years of trouble-free performance.The advanced “ALU Dry” aluminum heat exchanger module enables the packaging of the pre-cooler, evaporator, separator, and reheater all in one compact unit. This reduces the size, weight and pressure drop associated with conventional exchangers and optimizes the overall performance and reliability of the dryer which ensures effective removal of condensed liquids regardless of flow.Features: -- Microprocessor Controls with Dew Point Display Indication -- All-In-One Aluminum Design Exchanger -- Low-Pressure Drop -- Ozone Friendly Refrigerant -- De-Mister Type Moisture Separator -- Environmentally Friendly Refrigerant -- Hot Gas Bypass for Constant Dew Point -- Extended Service Life -- Timer Drain Options Include:ELGI Pre-Filter EPFP450 - 500 scfm - 2" NPTThe ELGi Premium Filter Series is constructed from premium materials and features with ease of installation and service in mind. Filter elements have a unique push-fit, double O-ring design to ensure no contaminants get down stream. -- High Quality Aluminum Construction -- Automatic Internal Float Drain -- Pop-up filter change indicatorPrice ...$ 1,150.00ELGI Zero Loss Drain, Model EZL10-110VELGi Electronic Zero Loss Drain, Model EZL10-110V, for compressors up to 500 scfm -- Unique sensor detects all kind of condensate -- High dirt resistance -- Low Maintenance -- Fully automatic -- Saves energyPrice ...$ 325.00

Plant Boiler System for up to 60,000 pounds of steam production per hour (1790 HP) with the following features and main components: -- (2) ENGLISH BOILER AND TUBE, INC. Boilers each rated for 20,700 pounds of steam per hour each. However, manufacturer specified they can be operated at 30,000 pounds per hour with dry wood or bark fuel (12 percent moisture). -- 250 PSI operating pressure ratings on each Boiler. -- VFD Drives on all main Motors. (The plant uses a maximum 75 HP for each boiler.) -- Electrical Controls. -- (1) Boiler has an Oil Burner for operating optionally on oil if sawdust or wood chips is not available. -- Chemical Water Conditioning System and Pumping System. -- De-aerator and Condensate Tank. -- Multi-clones for particle emissions reduction and abatement. -- (2) Fuel Storage Silos (25’x40’ & 20’x38’) with LAIDIG Model 243 Track-Driven Unloaders. -- Fuel Transfer Conveyors. -- The Silos also are included at the price shown and are available individually. See our listings DB-010162 and DB-010163 for details and individual pricing. -- Boilers can be purchased individually or as a pair. -- Professional removal and installation services are available.

Industrial Grade EUROVAC I Cyclone Separator & Cartridge Dust Collector Combination. -- Primary Separator: Cyclone on support stand and barrel waste collection: (A Rotary Air Lock with a larger waste bin can be added). Cyclonic action can remove up to 99% of dust and particles. -- SYS-030 Secondary Dust collection: Remaining 1% of dust collected using Cartridge Filter which are automatically cleaned by Pulse Jet cleaning using compressed air housed in a separate compressed air storage tank. -- Vacuum Producer: Heavy Duty cast iron turbine type pump with 10 HP energy efficient squirrel cage motors designed to run continuously all day. built-in thermal heat protection device, and overload protection in Control Panel. High 85" WC vacuum level. -- Control panel house pump starter controls with hand/auto selector for on demand starting. -- Features: Quiet operation with built sound deadening. Diaphragm valves for pulse jet cleaning. -- Approximate dimensions: 180" long x 70" wide x 72" high.

EVASHRED EV60E Dual Shaft Shredder with Infeed ConveyorEvashred is a well-known brand of commercial mobile and stationery shredders for solid waste designed and manufactured by F.V. Evans and Sons also known as Evans Engineering.Every type of shredder is designed specifically to shred a particular type of solid waste including Documents, Car & Truck Tyres, E-scrap (Hard Drives, Computers, Printers known as E-waste and e-scrap), Plastic, Foam rubber, Green Waste, Building Waste even Hospital WasteSpecifications: --30 kW / 40 HP Maximum Power --28-30 RPM Cutter Speed Rotation --Width 640 mm x 37 5mm Cutting Chamber Opening

EXCEL 2R10 Horizontal Auto-Tie Baler with ConveyorSpecifications: -- Main cylinder: 10” -- Eject cylinder: 9”; Bore 6” -- Cycle time: 16 Sec -- Bale size: 60” x 45” x 30” -- System pressure: 3,000 PSI -- Oil reservoir: 600 Gallons -- Platen force: 235,619 Lbs -- Main motor: (2) 50 HPEquipped with: -- Bale Discharge Platform -- Steel Belt Feed Conveyor -- Automatic bale release Door -- US Wire Tie -- Standard with either left-hand or right-hand eject -- Operator-free operation -- 50 HP TEFC Motor -- EXCEL Autonetics with absolute RAM position sensor with Electronic display -- US Wire Tie Systems - Automatic 342 Tier with Turbo Motor -- Industrial Hardened Logic Controller -- Fully lined with Hardox® 400 replaceable wear liners -- 300-gallon Hydraulic Reservoir with regenerative circuit (600-gallon 2R10) -- Upper & lower photo-eyes (sender/receiver upper photo-eye with integrated Conveyor control) -- NEMA 12 Rated enclosures and controls with Conveyor starter -- CASTELL key safety interlocking Entry System -- Bale Chamber penetration (S2R9: 27”; 2R10: 24”) -- Automatic bale release door -- Automatic shear jam correction -- Bale discharge platform

EXCEL - 2R10, ...Horizontal Auto-Tie BalerSpecifications: -- Main cylinder: 10” -- Eject cylinder: 9”; 6” Bore -- Cycle time: 16 Seconds -- Bale size: 60” x 45” x 30” -- System pressure: 3,000 PSI -- Oil reservoir: 600 Gallons -- Platen force: 235,619 Lbs -- Main motor: (2) 50 HPEquipped with: -- U.S. Wire Tie -- Standard with either left-hand or right-hand eject -- Operator-free operation -- 50 HP TEFC Motor -- "EXCEL Autonetics" with absolute RAM position sensor with electronic display -- U.S. Wire Tie Systems "Automatic 342 Tier" with Turbo Motor -- Industrial Hardened Logic Controller -- Fully lined with: AR "Hardox 400" Replaceable wear liners -- 300-Gallon Hydraulic Reservoir with: Regenerative Circuit (600-gallon 2R10) -- Upper & lower photo eyes (sender/receiver upper photo eye with: Integrated Conveyor control) -- NEMA 12-Rated enclosures and controls with conveyor starter -- CASTELL Key Safety Interlocking Entry System -- Bale Chamber penetration: 2R9 - 27 In.; 2R10 - 24 In. -- Automatic bale release door -- Automatic shear jam correction

EXCEL - 2R10, ...Horizontal Auto-Tie BalerSpecifications: -- Main cylinder: 10” -- Eject cylinder: 9”; 6” Bore -- Cycle time: 16 Seconds -- Bale size: 60” x 45” x 30” -- System pressure: 3,000 PSI -- Oil reservoir: 600 Gallons -- Platen force: 235,619 Lbs -- Main motor: (2) 50 HPEquipped with: -- U.S. Wire Tie -- Standard with either left-hand or right-hand eject -- Operator-free operation -- 50 HP TEFC Motor -- "EXCEL Autonetics" with absolute RAM position sensor with electronic display -- U.S. Wire Tie Systems "Automatic 342 Tier" with Turbo Motor -- Industrial Hardened Logic Controller -- Fully lined with: AR "Hardox 400" Replaceable wear liners -- 300-Gallon Hydraulic Reservoir with: Regenerative Circuit (600-gallon 2R10) -- Upper & lower photo eyes (sender/receiver upper photo eye with: Integrated Conveyor control) -- NEMA 12-Rated enclosures and controls with conveyor starter -- CASTELL Key Safety Interlocking Entry System -- Bale Chamber penetration: 2R9 - 27 In.; 2R10 - 24 In. -- Automatic bale release door -- Automatic shear jam correction

EXCEL - 2R10, ...2-Ram Horizontal Baler with Infeed ConveyorSpecifications: -- Main motor: (2) 50 HP -- Main cylinder: 10” -- Eject cylinder: 9” -- Pit section length with incline: 20’Equipped with: -- US Wire Tier -- Steel belt feed conveyor

EXCEL EX60(Non-Ferrous) Horizontal Closed Door Baler With In Feed ConveyorSpecifications: -- Motor: 20 HP. -- Cylinder: 9". -- Ram Force: 190,851 Lbs. -- Feed Opening: 40" x 55". -- Full Bale Chamber Penetration. -- Wear Liners: Hardrock 400 -- Automatic Shear Jam Correction.Price includes Loading onto your Truck.

EXCEL EX-62 Horizontal Closed Door Baler With Infeed ConveyorSpecifications: -- Feed Opening: 54" x 35" -- Main motor: 20 HP -- Cylinders: (2) 6" -- Total Ram Force 159,400 lbsFeatures: -- Infeed rubber conveyor: 48" -- 3" Cleats -- Removable shear blade -- Tongue and groove floor -- Full Penetration -- Loaded on your truck

EXCEL 2R63 2-Ram Horizontal BalerSpecifications: -- Main Cylinders: Twin 6" -- Eject Cylinder: 6" -- Main motor: 20 HP -- Cycle Time: 29 Sec -- Overall Force: 159,467 Lbs -- Feed Opening: 60" x 54" -- Bale Size: 60" x 48" x 30"Equipped with: -- U.S. 343 13 Gauge Wire Tier

EXTREMA DB-75 TYPHOON BLOWER. Capacity 7.5 HP motor and rated at 4,700 CFM. -- Solid heavy gauge steel construction. -- Heavy duty 13.5" dia. dynamically balanced steel impeller. -- 12" Inlet, 13.5" impeller, 14" outlet. -- Rotatable collection port for use in a variety of applications. -- Safety guards on all inlets. -- Complete with magnetic starter. -- Note: 460 Volt available

EXTREMA DCF-327E Baghouse Dust Collector.Features a 16" inlet; unit has (3) sections with (9) socks per section. -- Filter Socks: 6" Dia. x 70-7/8" for greater air-to-filter ratio; (1) Micron filter. -- Available for outdoor & indoor use; unit is enclosed. -- Excellent addition to the "DCY Typhoon" Dust Collector; ...ask us why!

EXTREMA DC-250.3 TYPHOON Cyclone & Fabric Filtration Dust Collection System. Powerful two-stage dust collection drops out heavier dust particles into a drum before passing finer particles through the fan and filter.Specifications: -- (1) Fabric filter bag placed above plastic collection bag. -- 2,975 CFM rated output. -- 5 HP Induction motor. -- 14-1/4" Steel blower fan impeller is dynamically balanced. -- Collection bag snap-in ring for easy addition or removal of plastic bag. -- Filter bag filters dust particles down to (1) Micron in size. -- Low noise operation. Includes: Sturdy steel tripod cyclone mounting stand. Drum dollie (drum not included).

EXTREMA DC-275.3 TYPHOON Cyclone & Fabric Filtration Dust Collection System. -- Powerful two-stage dust collection drops out heavier dust particles into a drum before passing finer particles through the fan and filter. -- (2) Fabric filter bags placed above plastic collection bags. -- Air volume output rated @ 4,850 CFM. -- 7.5 HP Induction motor. -- 14-3/4" Steel blower fan impeller and is dynamically balanced. -- Collection bag snap-in ring for easy addition or removal of plastic bag. -- Filter bags filter dust particles down to (1) Micron in size. -- Low noise operation. -- Includes: Sturdy steel tripod cyclone mounting stand and drum dolly. (drum not included).

EXTREMA DC-2100 TYPHOON Cyclone & Fabric Filtration Dust Collection System.Powerful two-stage dust collection drops out heavier dust particles into a drum before passing finer particles through the fan and filter.Specifications: -- (2) Fabric filter bags placed above plastic collection bags with 117 Sq. Ft. total cloth area -- 32 Cu. Ft. of storage capacity -- Rated at 6,400 CFM at 16" static pressure output. -- 10 HP Induction Motor. -- Inlet 13" with 16" Steel blower fan impeller that is dynamically balanced.Features: -- Collection bag snap-in ring for easy addition or removal of plastic bag. -- Filter bags filter out dust particles down to (1) Micron in size. -- Low noise operation. Includes: -- Sturdy steel tripod cyclone mounting stand and drum dollie (drums not included).

EXTREMA DC-3050.3 TYPHOON Fabric Filtration Modular Dust Collection System. -- With 1-micron dust filtration efficency this collector will make your shop cleaner, healthier, and more productive. -- (2) Fabric filter top bags are mounted above individual plastic collection bags. -- The multi-bag system is placed on sturdy steel legs in a horizontal series. -- 3,075 CFM Output with single-stage blower. -- Additional filtration sections can be easily added. -- Heavy Duty 5 HP blower motor. -- 13" Steel blower fan impellers are dynamically balanced. -- Collection bag snap-in rings for easy addition or removal of plastic bags. -- 1-Micron filter bags with 6 mil plastic bottom collection bags are standard. -- Options: Remote control and drum storage kit. -- Also available in Single Phase.

EXTREMA DC-3075.3 TYPHOON Fabric Filtration Modular Dust Collection System.With 1-micron dust filtration efficiency this collector will make your shop cleaner, healthier, and more productive. -- (3) Fabric filter top bags are mounted above individual plastic collection bags. -- The multi-bag system is placed on sturdy steel legs in a horizontal series. -- 4,550 CFM Output with single-stage blower. -- Additional filtration sections can be easily added. -- Heavy Duty 7.5 HP motor with push button control and motor starter, 12" inlet. -- 13.5" Steel blower fan impellers are dynamically balanced. -- Collection bag snap-in rings for easy installation and removal of bags. -- Filter bags filter out dust particles down to (1) Micron in size; 6 mil thick plastic bottom collection bags are standard. -- Options: Remote control and drum storage kit.