SHRED-TECH ST50 DUAL SHAFT SHREDDER With Control PanelSpecifications: -- (2) 20 HP Motors -- 1" Approximate Cutter Width -- Cutting Chamber 20" x 35" -- Control Panel -- Mounted on Stand -- Feed Hopper w/21" x 40" OpeningCan be shown under power

SHRED-PAK - 180, ...Double Shaft ShredderSpecifications: -- (2) 75 HP Motors. -- Hook Knives: 2"; (32) knives. -- Conveyor: 60" Wide x 24 ft. long for feeding or exit. -- Control Panel: 600 - 120. -- Stand.Loaded onto Truck.

SHRED-PAX - AZ-80, ...Shredder -- Dual Shaft Shredder. -- Motors: (2) 40 HP. -- Blades: 1" Width; (26) blades total. -- Crescent Moon Ram Assist. -- Ram rebuilt. -- Loaded onto your Truck.

SSI - SR-375H, ...Uni-Shear Shredder -- Singler rotor Shredder -- Main Motor: 150 HP. -- Hydraulic Ram Motor: 25 HP. -- Feed Opening: 49" W x 77" L. -- Soft Start. -- Speed: Medium. -- Ram: Hydraulic. -- Screen: 3" W x 6" L. -- Extra Set of new teeth (not installed). -- Ideal for: Wood, Paper, Plastics, and other brittle materials. -- Owner was shredding only plastic pails.

SSI - M-70-E, ...Dual Shaft, Low-Speed, High Torque ShredderEffective in bulky item reductio; product destruction or preconditioning (primary shredding) where output particle size variation is acceptable. Output consists of strips the width of the cutters (usually 1" - 3").Equipped with: -- 60 HP Drive motor; cutting chamber 29" x 40"; hopper opening 55" x 67"; cutting disc diameter 14.4"; cutting disc thickness 1-1/2". -- Auto reversal protects components; advanced bearing protection system assures longevity. -- Suitable for: Wood, plastics, electronic scrap, medical waste, textiles, and tires.

SSI Model - 1200-E, Slow Speed, High Torque ShredderSpecifications: -- 50 HP Motor; twin shafts with (27) 2" knives on each shaft; 52" x 22" chamber opening; 12-1/2" cutter dia., 1" thick; 25" x 58" bottom discharge.Includes: -- Stand, feed hopper; controls with spare 100 HP motor. -- Total footprint: 145" long x 4' wide x 55" stand height. -- Excellent for e-Waste/e-Scrap; tires, rubber, plastics, metals, hard drives, wood products, batteries, and large pieces of material.

SSI - 2400H, ...Mobile Tire ShredderSpecifications: -- Chamber Size: 60" x 40" -- 200HP Hydraulic Driven -- Mobile Shredder

SSI Model - 1000-E, Slow Speed, High Torque ShredderSpecifications: -- 50 HP Motor; twin shafts; 40" x 25" ChamberIncludes: -- Stand, feed hopper; controls

SSI Q85-ED QUAD SHAFT SHREDDER --Motor: 150HP --Voltage: 480v --Control Panel Included: Yes --Drive: Electric --Number of Electric Motors: Two --Horsepower: 150 --Shock Load Protection: Yes --Cutter Thickness: (nominal) 2"; (50 mm) --Cutter Diameter18.1"; (460 mm) --Cutter Material: HW5HW5 --Shaft Diameter: 6"; (152 mm) --Cutting Chamber: (WxL) 54"; x 52"; (1,380 mm x 1,315 mm) --Hopper Opening: (FxG) 81"; x 79"; (2,055 mm x 2,010 mm) --Hopper Height: (H)45"; (1,150 mm) --Stand Height: (I)48"; (1,220 mm)Shipping Information: --Overall Dimensions: 86"W x 119"L x 133"H --Shipping Weight: 29,500 Lbs.

STRIP-TECH MODEL 3000 Wire Stripper --Motor: 3 HP, 220 or 440 volts, 3 phase --Drive: Gear Driven --Feed: Auto Feeding --Production: Approx 100 ft/minute --Machine Height: 37″ --Machine Length: 46″ --Machine Width: 18″ --Leg Construction: 2.00″ tube --Machine Wt: 580 lbs. --Wire Size: 1/8 to 3 inch O.D.

SWEED MODEL 517 SCRAP CHOPPER With Dump HopperFeatures: --The Model 517 XHD provides a large cutting capacity. This is the chopper of choice for custom applications or for operations converting substantial quantities of linear scrap materials. Prepared for an abusive environment, the 517 XHD has a strong 1/2"; plate steel housing. The 517 XHD also features a magnetic starter to protect workers from an unexpected restart after loss of power. The powerful air activated feedworks is controlled with a footswitch for operator safety, and is also capable of despooling scrap wire and cable from reels. --Additional safety options are available. Material Reference The recommended model of scrap chopper is determined by scrap size, scrap volume, and requested custom features. Please consult a SWEED representative to determine the appropriate scrap chopper for your application.» High-tensile bale wire» Small, solid, aluminum and copper bars» Jacketed and non-jacketed wire and cable» For other materials, consult SWEED --Electric Motor 5 HP --Infeed Opening 6 "; W x 1 "; H Cut Length 3 ½"; standard (smaller cut lengths available with different knife configurations) --Number of Stationary Knives 1 --Number of Rotating Knives 1 standard --Overall Chopper Dimensions 56"; L x 34"; W x 30"; H --Chopper Weight 1,492 lbs --Chopper Shipping Weight 1,577 lbs -- Include Stand and Gaylord

TANA- SHARK 440DT, ... Portable Dual Shaft ShredderSpecifications: -- Approx 3900 Hours and New in 2015 --Bolt-on cleaning combs for easier maintenance --Magnet conveyor improvements - Discharge side to be selected from TCS + hydraulic magnet adjustment during operation --Rated power (SAE J1995) 399 kW (535 bhp) @2100rpm --Nominal torque 324,530 ft-lbs 440 kNm --Rotor length 9 ft 10 in --Number of rotor knives 33 / 44 --Screen sizes Available from Tana- 1.9", 3", 3.5", 3.9", 4.3", 4.7", 5.5", 6.6", 8.7", 10.8" --Screen area 29.6 sq ft

100HP Single Shaft Shredder With Infeed and Discharge ConveyorsSpecifications: --100 HP --Includes Infeed Conveyor- 50" Wide x 37’6"; Long, Sides 20"; high --Includes Discharge Conveyor - 47" Wide x 16' Long

UNTHA RS40-1000-37 QUAD SHAFT SHREDDER -- 1000 mm (39") cutting chamber -- (2) 30 HP motors -- 480 volts UL controls -- Wear lined, cast steel sidewalls -- 29 mm cutting system with 2 tooth main cutters -- Mechanical seals -- 60 mm screen with Hardox baskets -- Shimmed screen for position control -- Automatic central lubrication -- Quick change screen -- Brand new with warranty -- Loaded on your truck

VECOPLAN RG52/60 SINGLE SHAFT SHREDDER Includes Box Dumper and ConveyorsSpecifications: --In Feed Opening: 52″ x 58″ --Rotor Length: 52″ --Rotor Diameter: 15″ --Hopper Volume: (4) Cubic Yards --Cutters: 37 --Drive Motor: 60 HP --Box Dumper / Table --Infeed Conveyor --Discharge Conveyor for Gaylord Box Loading

VECOPLAN RG52/150 SPK SINGLE SHAFT SHREDDERSpecifications: --In Feed Opening: 52″ x 58″ --Rotor Length: 52″ --Rotor Diameter: 15″ --Hopper Volume: (4) Cubic Yards --Cutters: 60 --Nip Cutters: 29 --Drive Motor: 150 HP --Rotor Speed: 125 RPM --Hydraulic Ram: 3-5 HP

VECOPLAN RG 40-40 SINGLE SHAFT SHREDDERSpecifications; -- 40 HP Motor -- Opening 40" x 48" -- 10" Rotor -- (27) New Cutters -- (3) Screens -- New Allen Bradley Panel, Panel Counter Knife, New Guide Rails, New Ram Wipers.Price is Loaded on your truck

VECOPLAN - RG 52, ...Single Shaft ShredderCOMPLETELY Rebuilt!VECOPLAN "RG 52" Low Noise Waste Grinder with: Vertical hopper feed; suitable for wood, paper, and plastic applications; 52" x 58" opening. -- 60 HP Rotor motor, power belt drive; 15" dia. high output "Torsion Point" cutting rotor with a (74) 4-way indexable, replaceable cutterknives. -- Rotor/cutter head grinds at approx. 120 - 140 RPM; average noise level 60 - 70 dbA. -- Includes: Heavy Duty construction stress-relieved shell and frame; tramp metal protection; oversized gear box and Heavy Duty roller bearings. -- Precision hydraulic "Process Ram" with: 5 HP, 2-Speed pump motor; fluid "TurboCoupling; monitored by programmable logic control feeding system. -- Separate electrical Control Panel with push button controls. -- Machine weight: 10,000 - 12,000 Lbs.

VECOPLAN VAZ 120/105 Low noise Wood Waste GrinderSpecifications: -- Vertical 2.9 cubic yard hopper, 42" X 48" opening, 30 HP rotor motor. -- 10" Dia. rotor with (27) indexable, replaceable cutter knives, rotor/cutterhead grinds at 120 RPM. -- Hydraulic pusher ram; separate electrical control panel with pushbutton controls, 80 DBA noise level. -- Features: -- 4-Sided flared hopper, Fluid TurboCoupling. -- Easy access Screen, Suitable for Wood, Plastic or Paper applications.

VECOPLAN RG 70/200K Shredder with Steel Belt Conveyor & Dust CollectorSpecifications: -- Hopper Opening: 70″ x 80″ -- Hopper Volume: 4 – 6-1/2 Cubic Yards -- Main motor: 200 HP -- Rotor diameter: 20″ -- Number of cutters: 84 (triple row) -- Size of cutters: 40 mm x 60 mm -- Screen size: Holes 2″ -- Rotor speed: 145 RPM -- Rotor diameter: 20″ -- Hydraulic Feed Ram: 10 HP - 2-Speed -- Throughput: 2,000 – 28,000 Lbs/HrEquipped with: -- 10 HP Motor Dust Collector -- 48″ W kW SCHMIDT Shredder Infeed Conveyor w/ 20′ pit section