ELGI EG30-125 Rotary Screw Air Compressor; 40 HP - 170 CFM @ 125 PSIG40 HP Rotary Screw Compressor (Direct Drive); Air-End equipped with "eta-V" profile rotors. Equipped with: -- 4/5 Lobe combination designed to run at optimum speeds; low operating speeds for extended life, low maintenance and a reduced sound level; Intake Valve System with integrated blow down unit, solenoid controls & actuators designed for low losses. -- Optimal Capacity Control results in a direct saving on power consumption; air-oil separation with OSBIC process means oil-free air (1 PPM), per ISO standards and increasing the life of the separator element. -- Features: -- Efficient air cooling system; "Smart" cooling system maintains a lower temperature which increases the motor life, enables easy maintenance and the ducting is completely insulated internally from the other zones. -- Robust, reliable and able to perform at extreme temperatures - from cold to hot and from dry to extreme humid conditions. -- Complete with: -- Performance Control System's user-friendly intuitive backlit display for easy reading; remote monitoring through an RS485 connection; optimal pressure sensors monitor compressor internal pressure differences to optimize compressor maintenance. -- Includes: -- Phase Monitor, Auto Restart; custom designed, centrifugal type moisture separator with an automatic timer control drain which removes over 99% of bulk water from the compressed air.LIFETIME Air-End Warranty

ELGI EG37-125 Rotary Screw Air Compressor; 50 HP - 212 CFM @ 125 PSIGELGi’s Encap series screw compressors are designed to encapsulate all functional components and compressor within a common housing. With its small footprint, high reliability and low maintenance requirements, the compressors are ideal for all industrial applications where size, efficiency and cost matter.Specifications: • Horsepower: 50 • Starter: Wye Delta • CFM: 207 • PSIG: 125Standard Features: • 6 Year Airend Warranty • Low Sound Enclosure • Premium Efficiency NEMA motor w/F insulation • TEFC Drive and Fan Motor • High Ambient Oil Cooler for low operating temperature • UL/cUL Certified Control Panel with Wye-Delta Reduced Voltage Starter • Controls & Indications: Microprocessor Controller includes • Maintenance Schedules • Pressure Transmitter • Temperature Transmitter • Auto Restart • Remote Start / Stop • Modulation and Load / Unload Controls • Phase Monitor • DCS Connection through Rtu/RS 485 PortExtended Warranty (Parts and labor):Extended Warranty coverage requires commissioning report submitted within 30 days of the compressor start-up, the use of ELGi replacement parts, adherence to ELGi’s maintenance schedule, testing, and conditions as outlined below. Failure to follow these terms will void the Extended Warranty.Air End:72 months from date of start-up or 78 months from date of shipment from an ELGi warehouse, whichever occurs first.

ELGI EG45-125 Rotary Screw Air Compressor; 60 HP - 267 CFM @ 125 PSIG60 HP Rotary Screw Compressor (Direct Drive); Air-End equipped with "eta-V" profile rotors. Equipped with: -- 4/5 Lobe combination designed to run at optimum speeds; low operating speeds for extended life, low maintenance and a reduced sound level; Intake Valve System with integrated blow down unit, solenoid controls & actuators designed for low losses. -- Optimal Capacity Control results in a direct saving on power consumption; air-oil separation with OSBIC process means oil-free air (1 PPM), per ISO standards and increasing the life of the separator element. -- Features: -- Efficient air cooling system; "Smart" cooling system maintains a lower temperature which increases the motor life, enables easy maintenance and the ducting is completely insulated internally from the other zones. -- Robust, reliable and able to perform at extreme temperatures - from cold to hot and from dry to extreme humid conditions. -- Complete with: -- Performance Control System's user-friendly intuitive backlit display for easy reading; remote monitoring through an RS485 connection; optimal pressure sensors monitor compressor internal pressure differences to optimize compressor maintenance. -- Includes: -- Phase Monitor, Auto Restart; custom designed, centrifugal type moisture separator with an automatic timer control drain which removes over 99% of bulk water from the compressed air.LIFETIME Air-End Warranty.

ELGI EN05-125 7.5 HP ENCAP Rotary Screw Compressor w/Tank & Dryer; 26.5 CFM @ 125 PSIG.ELGI's 7.5 HP Rotary Screw Air Compressor wRefrigerated Dryer mounted on a 60 gal. receiver tank.Equipped with: -- 7.5 HP motor operation up to 115°F ambient temperature; "Neuron" controller that has been custom designed and engineered to monitor and control overall performance. -- Includes service indicators, fault alarms, safety shutdowns and a service / operational log feature for real-time feedback. -- Phase monitor, auto re-start, and the ability to hook up to a RS 485 connection to monitor the system remotely.Includes: -- 60 Gal. receiver tank, 25 CFM Refrigerated Air Dryer; single-door access to routine maintenance points. -- Spin-on oil filter and separator elements for fast and easy routine service.6-Year Air End Warranty. - UL/cUL certified to ensure high levels of safety. -- (230 Volt, 1-Phase option available).Compressor weight approx 860 LbsCompressor dimensions approx 54" x 45" x 58"

ELGI EN07-125 10 HP ENCAP Rotary Screw Compressor w/Tank & Dryer; 38 CFM @ 125 PSIG.ELGI's 10 HP Rotary Screw Air Compressor w/20 CFM Refrigerated Dryer mounted on a 120 gal. receiver tank. -- Equipped with: 10 HP motor operation up to 115°F ambient temperature; "Neuron" controller that has been custom designed and engineered to monitor and control overall performance. -- Service indicators, fault alarms, safety shutdowns and a service / operational log feature for real-time feedback. -- Phase monitor, auto re-start and the ability to hook up to a RS 485 connection to monitor system remotely. -- Includes: 120 Gal. receiver tank, 40 CFM Refrigerated Air Dryer; single-door access to routine maintenance points. -- Spin-on oil filter and separator elements for fast and easy routine service.6-Year Air End Warranty. - UL/cUL certified to ensure high levels of safety.

GANNOMAT Elite 25 Construction & Line Hole Boring Machine --25-SpindleConstruction hole and Line hole32 mm Boring Machine. --Specification: -- 2 HP - 3,400 Motor, 31" (768 mm) max. working width up to 34.4" (900 mm) through feed width. -- Adjustable drilling stroke up to 3-7/8", line drilling up to 11-3/4" from edge. -- Drills vertically from bottom and horizontally from rear, pneumatic tilting of boring head from 0° - 90°, with pneumatically operated rear stop with selector switch. -- Features quick, removable side stops for conversion to line boring, mirror-image fence setting device. --Complete with: -- Side fences with micro-adjustment, optional line drilling fence, (3) flip-stops. -- Pneumatic holddown clamps, foot control, and emergency stop button.

GANNOMAT COMBI 110 CONSTRUCTION LINE BORER(23) Spindle head, 2 HP - 2,800 motor, 31-1/2" max. working width, 3" drilling stroke, drills vertically from bottom and horizontally from rear, tilts pneumatically from lower to rear position with positive stop at 45° for angle drilling. -- Holddown clamp assembly tilts 90° for clamping short panels vertically for edge boring, no need to swivel boring head, hydraulic brake for through boring. -- Complete with: (4) Pneumatic holddowns, mirror imaging fences, 4,000 mm line boring fence w/stops and 1,500 mm butt joint fence with (2) flip stops.

GARDNER DENVER - VS80A, ...Rotary Screw Compressor 100 HP, 436 ACFM @ 125 PSI, 125 PSI operating pressure (175 PSI max), 2" air outlet, and 71 dBA.Also included: -- Full sound enclosures. -- GARDNER DENVER Air Dryer model "RCD500A8". -- Air tank: 1,60 gallons, year 2002 -- Operating hours: 36,652Note: Specifications need to be confirmed..

GARDNER-DENVER 2BV5121 15 HP Liquid ring pump:11.4 kW (15 HP), Volume flow 360 CFM; operates at a low noise level of 74 dBA.Specifications: -- The "2BV5121" series are compact plug-and-play systems for easy on-site installation; pumps are air-cooled, 100% oil-free, and do not require additional water during operation. -- Due to contact-free compression, they are virtually wear-free in operation and require no periodic maintenance. -- The patented discharge-air cooling system ensures that the pumps will not heat up by more than 15K above room temperature; pumps work reliably in continuous operation and are steam resistant & insensitive to condensation of the pumped air. -- Vacuum power units of the "2BV5121" split type are standardized liquid ring pump circulation systems with patented exhaust air cooling for large volume flows. -- A considerable amount of the water contained in the cool exhaust air condenses, remains in the system, and is available as operating water; as a result, many applications no longer require additional operating water.(2) Available, buy both for less than $9,000.

Sutorbilt Legend 5M -- Standard, medium-pressure -- Diameter (inlet/outlet): 4" NPT -- Shaft size: 1.125" -- 2,350 Max RPM

2L Sutorbilt -- 5 HP Motor -- 5,275 Max RPM -- Pressure to 15 PSIG -- Flows to 3015 CFM

GENERAL - 40-400, ...SINGLE SPINDLE SHAPERSpecifications: -- 7.5 HP Motor, 1-1/4" spindle. -- (4) Working speeds: 3,600 - 5,000 - 7,200 & 9,000 RPM. -- 5" Vertical spindle adjustment. -- Table dimensions: 30" x 36"; Distance in front of the spindle: 16-1/2"; table insert rings: 5-1/2" & 8-3/4"; split style adjustable fence.Includes: -- Push button magnetic switch & spindle reverse rotation switching. - Not included: Interchangeable spindles. -- Knives max. width cap.: 5".

GENERAL 350 10" Tilting Arbor Table Saw, with 5 HP Motor & Rip FenceSpecifications: -- Table size 20" LR x 28" FB x 34-1/2" H. -- Arbor dia. 5/8", Tilt 0° - 45° to right, Blade speed 4,000 RPM. -- Max. depth of cut: 3-1/8" at 90°, 2-1/8" at 45°, Max. width of dado cut 13/16". -- Max. rip cap. 52" Right.Equipped with: -- 8" Left & Right table extensions. -- 5 HP Motor.Complete with: -- DELTA "UNIFENCE SAW GUIDE" 43" L x 3-1/2" H Rip Fence System. -- Blade Guard. -- Miter Gage.

GENERAL ELECTRIC - 9T, ...3-Phase TransformerSpecifications: -- 208 Volt secondary to 480 Volt primary; 45 KVA @ 150° C rise; 120 V neutral line; 60 Hz - 3 Ph; Type 2 enclosure. -- Includes: -- Fused disconnect.

GENERAL UP0-1028 2-Bag Portable Dust CollectorSpecifications: -- Cloth filter bag size 18" Dia. x 30" L, Cloth collector bag size 18" Dia. x 30" L. -- Inlet dia. 6", Outlet size 4-1/2" x 6"Equipped with: -- (4) Swivel casters.Complete with: -- 6" - 3-1/2" Dia. Dust Hose 3-Way Fitting.

GENERAL 30-225 15" x 6" Single-Sided PlanerSpecifications: -- Planing thickness 1/8 - 6", Min. stock length 6-1/2", Max. depth of cut 3 mm (0.12"). -- Table size 14-1/2" W x 19" x 30-1/2" H. -- Cutterhead speed 5,000 RPM, Feed speeds 16 & 20 FPM. Equipped with: -- 3" Dia. 3-Straight Knife Cutterhead, with 3 HP Motor. -- Serrated spiral infeed & Smooth solid steel outfeed rollers. -- Anti-kickback fingers & Chipbreaker. -- (2) In-table rollers. -- 16-1/2" W x 20-1/2" L Infeed & Outfeed folding extensions. -- Built-in mobile base, with Pedal lock.Dimensions with infeed & outfeed tables extended: 61"; x 30"; x 48"; H.

GENERAL KINEMATICS Para-Mount II Single Deck Rectangular Vibratory Screener;Complete with the following features: --Model STM 96 X 20. --Carbon Steel. --Nominal screen size 96" wide x 20 long x 15" deep. --Designed for Trona mineral at a feed rate of 700 tons per hour at 80 pounds per cubic foot bulk density. --Driven by (2) 15 HP top mounted drives. --Current screen: Approximate 1" x 1" square openings. --Base mounted. --Overall dimensions: 290"L X 130"W X 90"H

GENOX V800 New Single Shaft ShredderIn Stock - Ready to Ship!Features: -- Shock Absorbing Gearbox that reduces stress on Drive Components -- 50 HP motor -- Hopper Opening - 59" x 56" -- Rotor Diameter - 15.75" -- Rotor Knives that can be used on four edges before replacement. -- Durable Counter Knives that adjust to maintain cutter clearance -- Quick Change Screens for accurate particle size control -- Segmented Shredding Chamber Floor with Brass Guides -- Twin Speed Hydraulics with an integrated air cooler -- Stand Alone Electrical Control Panel with Siemens PLC Control System -- Tested, Approved and Certified to the applicable CE safety standardsTypical Applications --Plastics --Wood --Cable --Paper --Aluminum --Foam --Textile

GENOX V600 New Single Shaft ShredderIn Stock - Ready to Ship!Features --Shock Absorbing Gearbox that reduces stress on Drive Components -- 25HP -- Hopper Opening - 48" x 43" -- Rotor Diameter - 9" --Rotor Knives that can be used on four edges before replacement. --Durable Counter Knives that adjust to maintain cutter clearance --Quick Change Screens for accurate particle size control --Segmented Shredding Chamber Floor with Brass Guides --Twin Speed Hydraulics with an integrated air cooler --Stand Alone Electrical Control Panel with Siemens PLC Control System --Tested, Approved and Certified to the applicable CE safety standardsTypical Applications --Plastics --Wood --Cable --Paper --Aluminum --Foam --Textile

DTX 340 - 14" BLADES" Alligator Shear Description -- DTX 340 --Blade Length: 14"; (340 mm) blades --4-sided reversible & regrindable --Lower blade in adjustable knife seat --Adjustable mechanical guard & adjustable jaw opening --Supplied with guard over cutting head --Foot pedal control