Automatically feeds, shapes & ejects Rosette blocks in sizes from 2-1/2" - 5" max. square blocks; 1.5 HP motor belt drives 2-7/8" spindle cutterhead @ 7,500 RPM. -- Operation: Adjustable hopper feed to side of spindle automatically indexes Rosette blocks under cutterhead up against a corner-V holding fixture with overhead spring fingers, cutterhead advances and machines Rosette, then automatically ejects block to front (hydraulic position of block and air eject cylinder). -- Features: Cutterhead equipped for standard 16°/60° corrugated back 1/4" thick knives to be ground at 0° hook angle. -- Produces up to (500) Rosettes/Hr; Rosette profiles can be ground on any profile grinder for infinitely variable design possibilities; table top unit may include base.

Automatically feeds, shapes & ejects Rosette blocks in sizes from 5-1/2" - 8" max. square blocks; 3 HP motor belt drives 4-3/4" spindle cutterhead @ 7,500 RPM. -- Operation: Adjustable hopper feed to side of spindle automatically indexes Rosette blocks under cutterhead up against a corner-V holding fixture with overhead spring fingers, cutterhead advances and machines Rosette, then automatically ejects block to front (hydraulic position of block and air eject cylinder). -- Features: Cutterhead equipped for standard 16°/60° corrugated back 1/4" thick knives to be ground at 0° hook angle. -- Produces up to (500) Rosettes/Hr; Rosette profiles can be ground on any profile grinder for infinitely variable design possibilities; table top unit may include base.

MOAK - NO. 7, ...Spindle ShaperSpecifications: -- 1.5 HP motor, belt driven to spindle; 9,000 RPM spindle speed; 1" diameter spindle. -- Length of spindle above table is 5"; 3-1/4" vertical adjustment of spindle; 22" x 42" table; manual starter; 750 Lbs machine weight.

MOAK "7" Shaper with STEFF 38 Feeder5 HP motor, belt driven to spindle; 9,000 RPM spindle speed; 1" diameter spindle; length of spindle above table - 5"; 3-1/4" vertical adjustment of spindle; 22" x 42" table; manual starter; machine weight - 750 lbs.Includes STEFF 38 Feeder.

Specially designed haunching machine for beaded face frames, picture frames and decorative cabinetry. This machine uses a specially designed 2-piece carbide insert adjustable cutter. -- The work piece is placed on the table and against the fence and the cutter travels in a vertical motion to achieve the precision cut. -- Any size cut width is attainable by adjusting the width of the cutter and indexing from the fence stops. -- TECHNICAL SPECIFICATIONS -- Motors: 1 @ 1.1 KW (1.5 HP), Voltage: 220/440V/3/60hz, RPM: 6,000 RPM @ 60 hz, Air: 6 Bar, -- TOOLING: Insert Carbide: Milling head 140 mm (5.5"), Height min: no min., width 1/6" (4.2 mm). Max Profile: Height 3.5" (88.9 mm), width no max. -- Machine Dimensions: L x W x H - 40" x 30" x 35". Machine Weight: 675 lbs. -- AVAILABLE OPTIONS (Call for Pricing): Tooling carbide insert head, additional set of inserts, additional flip stops, foot pedal control, left & right digital fence.

Rigid one piece welded steel frame, with 10 HP direct drive spindle motor at 7,800 RPM, 1-1/4" x 4-1/2" stackable multi-cutter spindle to mill stile, rail & raised panel profiles. -- Stackable cutter spindle with push button indexing to significantly reduce set-up time as each station is preset; the change from one cutter to another is achieved via a select switch for each operation. -- Complete with: X - Y Sliding table w/pneumatic holddown. -- 2-way linear movement for straight or arch top doors up to 50" long. -- 5" Dust collection hood, and cutter shield. -- Includes: (1) Cathedral arch templates, (1) complete set of tools.

OLIVER 4705 SHAPER 5 HP, Sigle phase or 7.5 HP, 3-PhSpecifications and Features: -- Massive cast iron precision ground table provides a solid work surface. -- Cast iron base provides a steady platform. -- 3/4” and 1-1/4” interchangeable spindles are included for added versatility. -- Three spindle speeds allow more choices to produce a better finish. -- Reversing spindle gives more options for each set-up. -- Innovative dovetail design accurately raises and lowers the spindle. -- Fence is independent and features micro adjustments for quick set-up. -- Top mounted control panel includes a digital readout for spindle height. -- Large hand wheel for quick spindle height adjustment. -- Magnetic controls with emergency off switch for safer operation. -- Includes miter gauge. -- Spindle Speeds: 5,000, 7,000 and 10,000 RPM. -- Maximum Tool Diameter: 7” Below Table, 8” Above Table. -- Spindle Diameter: 1-1/4” and 3/4” Interchangeable. -- Vertical Spindle Travel: 4". -- Table Height: 36-1/2". T-Slot: 3/4" x 3/8". -- Dust Port Diameter: 4". -- 800 CFM min. -- Optional collet for router bits available special order --[1/2" Spindle for Models 4705 & 10047 Shaper]1/2" Spindle for Models 4705 & 10047 Shaper$89.99Model 10047[3/4" Spindle for Models 4705 & 10047 Shaper]3/4" Spindle for Models 4705 & 10047 Shaper$89.99Model 10047[1" Spindle for Model 4705 Shaper]1" Spindle for Model 4705 Shaper$99.99Model 4705[1/4" Collet for Models 4705 & 10047 Shaper]1/4" Collet for Models 4705 & 10047 Shaper$69.99Model 4705[1/2" Collet for Models 4705 & 10047 Shaper]1/2" Collet for Models 4705 & 10047 Shaper$59.99Model 4705[1-1/4" Spindle for Model 4705 Shaper]1-1/4" Spindle for Model 4705 Shaper$99.99Model 4705 prices may vary.

ORTON TYPE F SHIP SHAPER/ROUTERORTON Type "F" Ship Shaper/Router, with a 40' x 60" Table Size, -- 7-1/2 hp, 230 Volts, 3 Phase, -- Oil Mist Lubrication. -- Machine has been Completely Restored. -- Can be used as a Shaper or Router. Comes with a Mandrel with Top Bearing Attachment so Machine can be used as a Tilting Spindle Shaper. -- Can also be used as a Tilting Spindle Router with Collet Chuck Attachment with 1" HSS Spiral Cutter and Template Guide. -- Heavy duty Spindle with Brown and Sharpe #11 Tapered Socket in Spindle. -- Spindle Tilts 30 degrees forward and 45 degrees backward. -- Great for Cutting Changing Bevels. -- Approx. weight 3000lbs. -- Lamp and cord not included.

PISTORIUS HM-1-S VERTICAL HAUNCHING MACHINEVertical hauncher/notcher with 7-1/2 HP drive motor and high speed spindle with 1-1/4" arbor dia. x 4" long, with maximum Cutter Diameter of 8 inch.Features: Heavy-duty precision linear bearing ways, pneumatically operated via foot pedal activation.

Porter 165 Double Sided Buck Shaper --4" Long spindle --, 8" vertical & 5" horizontal travel, interchangeable 3/4" spindle, -- 3 HP motor, 12,000 - 18,000 RPM.Will also include a Grizzly HP G4181 power feeder.

Accepts 3/4", 1", & 1-1/4" Dia. interchangeable spindles, 5.5 HP motor; 3,625 - 5,000 - 7,250 - 10,000 Spindle speeds. -- 4" Cap. under nut when using the 1-1/4" spindle, 6-19/64" spindle stroke; Approx. 39-1/2" x 31-1/2" extra thick cast iron main table, -- Complete with: Adjustable split fence, spring hold downs, removable table inserts, dust collection shroud, reversing switch, spindle brake, and cutterhead guard. -- Includes: Infeed and outfeed tables shown in picture. - Note: Needs some work on bearings.

POWERMATIC 26 SINGLE SPINDLE SHAPER -- Specifications: 5 HP - 3,600 RPM belt drive motor; 7,000 & 10,000 RPM spindle speeds via 2-speed step pulley, with reversing switch. -- 1" Dia. solid interchangeable spindle featuring 3-7/8" Cap. under the nut and 3" spindle travel w/hand wheel adjustment -- Complete with: 24" x 26" Cast iron table w/miter slot and 7" insert opening. -- Equipped with: Adjustable Fence, and Magnetic controls, 4-Roll 4-speed Power Feeder .

POWERMATIC 26 SINGLE SPINDLE SHAPER -- Specifications: 5 HP (3.7 kW) - 3,600 RPM belt drive motor; 7,000 & 10,000 RPM spindle speeds via 2-speed step pulley, with reversing switch. -- 1" Dia. solid interchangeable spindle featuring 3-7/8" Cap. under the nut and 3" spindle travel w/hand wheel adjustment -- Complete with:24" x 26" Cast iron table w/miter slot, 7" insert opening, adjustable fence, and Magnetic controls. -- Actual Model is POWERMATIC 26

POWERMATIC Shaper PM 2700, Spindle Shaper model 128-0102C 5 HP, Single Phase, 230 V - 1280101-CSpecifications & Features: -- Digital readout gives the use of exact spindle height and allows for 0.001" adjustments. -- 4" Spindle travel. -- 5 HP Motor -- Heavy-duty 30" x 40" precision ground tabletop for smooth stock feeding and Heavy-duty cast iron base. Includes: -- 3/4" and 1-1/4" spindles -- Independently adjustable fence sides. -- Micro-adjust control knobs allow for precision adjustment for the fence. -- Integrated casters can be raised and lowered to mobilize shaper. -- Superior clear cutter guard promotes safety, allows observation of the entire cut. -- Table predrilled and tapped for Power Feeder mounting.Dust Collection Minimum CFM Required (CFM) 600; 4"Dust Port Outside Diameter

POWERMATIC 28 SHAPER1-1/4" Dia. spindle, 7.5 HP - 3,600 RPM motor; with 3,300 to 9500 RPM spindle speeds via Factory installed Variable frequency Drive. 4-3/4" Cap. under nut when using the 1-1/4" spindle, spindle brake, 30" x 39" table.

POWERMATIC Shaper TS-29, with Sliding Table & Tilting SpindleSpecifications: -- 3/4", 1", & 1-1/4" Dia. interchangeable tilting spindle, 3/8" & 1/2" collet & router bit adapters, tilts 45° forward and 5° back, 7-1/2 HP - 3,600 RPM motor; 3,000 - 4,000 - 6,000 - 8,000 - 10,000 RPM spindle speeds via 4-step V-pulley with "quick release". -- 4-3/4" Cap. under nut when using the 1-1/4" spindle, 7-1/16" spindle travel; 51-1/2" x 33-1/2" extra thick cast iron main table, (3) removable table inserts 2-1/2" - 5-1/2" & 5-7/8" x 4-3/16" (oval).Complete with: -- Large scale "ACCU Fence" with integrated 4" dust collection shroud, reversing switch, AMBI-TECH electronic brake, cutterhead guard, clamping miter gauge & magnetic control; incl. owners manual & parts list. Actual Model # 1791284

RITTER R-30RP Raised Panel Door Shaper(3) Shaper Spindles mounted in a precision ground worktable (68" X 52" Deep X 36" Working Height ) Designed for running raised panels, as well as style & rail material for raised panel doors. -- Preset Spindle Locations, Equipped with (2) 5 H.P. Spindle Drive Motors On Right And Left Spindles, and (1) 7.5 H.P. Spindle Drive Motor At Center Spindle. -- The 1-1/4" Diameter Variable Speed Spindles are driven with Micro-V Belts. 5-1/2" max. cutter dia. -- 1st Spindle: 2" high x 12" wide max. tenon. 2nd Spindle: Setup for shaping of raised panels. 3rd Spindle: Setup for machining of style & rail and outside lip of door. -- Complete with: Micro Adjusting Fences, Miter Gage Slot at Right Hand Spindle (3/4" W X 3/8" Deep), Dust hoods (3 - 4" Connections), and Door Interlock Safety Switches.Suggested Options -- H154: PANELCRAFTER 24" Capacity Panel Jig, with 2 Cylinders. -- Jigs float on a cushion of air for smooth, easy operation. Proven design for years of trouble free use. Single thumb lever activates floating and clamping cylinders. Use with material thickness up to 2" thick. Self centering mechanism, and Variable flotation regulation. Large hand grips help operator control work piece. Change door style by simply changing the templates using a wide range of template designs and sizes. This Option requires 2 CFM at 80-100 PSI of supplied air.- R10TESA: Coping Attachment -- Fits any 3/4" by 3/8" deep slot, 2" X 12" capacity, with (3) Adjustable hold down clamps.- H161: Power Material Feeder, with reversing. -- (3) 20mm Rubber Rollers, 1HP Motor, 8 Adjustable Speeds (6,13,18,21,36,42,54,102 FPM)

Designed for machining of beaded face frames, cabinet doors and related joint construction. The machine miters all required corners and notches without the need to change a set-up. -- Production time is reduced to seconds with the use of the 6,500 RPM cutterhead capable of machining (2) parts at the same time. -- Standard Features: 7.5 HP spindle drive motor, 40 MM diameter 6500 RPM spindle, 7" maximum cutter head diameter, Adjustable pneumatic cutter head feed stroke, 60" stile & rail alignment fence, 16" material width capacity, (8) quick reference material fence alignment stops (6) quick reference fence offset stops, (4) hold down clamp cylinders. -- 48" wide table with 34" fixed work table height, magnetic controls, foot pedal controlled machining cycle. -- Tooling Options Sold Separately ($4,500): 7/8" Cutter head pattern, 5/16" bead carbide tipped, 1" cutter head pattern, 5/16" bead carbide tipped. Custom pattern heads upon request. -- Additional Options: 72" & 84" alignment fences, additional fence offset stops, additional fence stops. -- 4" diameter dust outlet. Weight: 1,430 lbs. -- This machine is also available with a 5 HP 220V single phase motor at the same price.

36" X 72" Work table area, 24" door width & unlimited door length capacity. Capable of producing a complete raised panel detail in one (1) minute. Routers are guided by the fences or templates attached to the fences. -- Equipped with: (4) 3" Bore AC 20 clamp cylinders; (4) 1-1/2" x 1-1/2" adjustable fences; (2) 1.5 HP router motors with dust hoods; (1) 7/8 HP router with dust hood; and (1) 1475-H Heavy Duty 3-1/2 HP Hogging Router w/ cutter & dust hood. -- Complete with: 1475-A Tooling set, template guides; regulator and gauge; and (4) 2-1/2" dia. X 8' long flexible dust collection hoses.

High quality American made fixed spindle Shaper. -- Fabricated steel base with precision ground built-in cast iron table. -- Table insert rings to easily accommodate a wide range of cutterhead dia. -- Interchangeable spindle with lock for easy tool change. -- (8) Spindle speed settings for a variety of size cutters. -- Spindle reversing switch as standard. -- Standard 3/4" x 3/8" groove in table for miter gauge (not included). -- Large hand wheel for manual spindle height adjustment. -- Electronic digital height display. -- Micro-adjustable fence that easily adjusts for short runs. -- Large cabinet style door for easy access to motor & quill assembly. -- Self-braking motor. -- Magnetic starter & thermal overload switch. -- Integrated dust shroud & spindle guard assembly with manual holddown. -- Emergency stop. -- Operations manual, parts list & tool kit.