TLAS COPCO - GA 65, ...Rotary Screw Compressor with Air Dryer 73.4 HP - 1,755 RPM Motor, totally self-contained, single-stage rotary screw air end; approx. 320 CFM at 132 PSI rated operating pressure, max. modulation pressure 135 PSI.Standard features include: -- Inlet air filtration. -- Oil injected lubrication, -- Motor starting control system. -- Air cooled after-cooler, moisture separator and drain trap.Operator Display Panel with: -- Pressure gauges, control mode selection, remote & automatic start, and hour meter.Includes:INGERSOL RAND "TS 325" Air Dryer wired on 230 Volt single-phase.Total operating hours: 52,774.

AUTO-V-GROOVE AVG-48 MFT UNIVERSAL V-GROOVER: -- Specifications:(1) Head automatic cross & linear V-Groover, 48" max. material width on cross-groove,Unlimited length for linear grooving, 1-1/4" max. material thickness. -- Features:(1) 10 HP - 3,600 RPM Motor, 30 mm dia. belt driven precision cutter arbor, 3-1/4" max. cutter width.2 HP Hydraulic feed motor for infinitely variable crosscut feed speed from 0 - 50 FPM & 0 - 60 FPM for linear feeding.Heavy-duty double belt feeder assembly for linear grooving. -- Includes: Adjustable pneumatic material hold-down bar.(1) 84" x 24" Main table, (1) 20" x 58" auxiliary table, (1) large 96" long floating table on rails. -- Complete with: Automatic tape applicator (12" max. dia. tape roll), manual quick crank tape applicator positioning system. -- Options Include: An assortment of V-Groove cutters as pictured.Actual Model is AUTO-V-GROOVE AVG-48-M/FT.

AUTOQUIP 48S60 SCISSOR LIFT.6,000 Lbs Cap., electro-hydraulic operation. -- With 36" x 64" smooth steel platform. -- 7" Lowered height, 48" travel to raised height of 55"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (33) Sec travel time up-or-down. -- Complete with: Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on base frame. -- Options: Up to 48" x 96" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black; .

AUTOQUIP 36S80 DL Double Long Scissor Lift.12,000 Lbs. max. cap. with standard 24" x 98" smooth steel platform top. -- 36" Travel with a 7-1/4" height and 43-1/4" raised height; (35) Sec up and down speed. Base frame 24" x 98". -- Power unit with 5 HP remote Super Torque Motor, 208-230-460V - 3 Ph - 60 Cy, fan-cooled, Intermittent (2 minute) duty. -- Polyethylene hydraulic fluid reservoir with a capacity of 5 gallons. Supply voltage must be specified. -- Complete with; Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe, -- Options; Guarded foot pedal control, Accordion skirt, larger platforms available. NOTE: Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 36S40 Scissor Lift.4,000 Lbs Cap., Electro-hydraulic operation. -- 36" x 60" smooth steel platform . Base frame is 24" x 48". -- 6.5" Lowered height, 17 Sec travel speed to a raised height of 42.5"; Internally mounted 1.5 HP Super Torque motor, 1-cylinder design. -- Complete with: Optional guarded foot control, velocity fuse on cylinder, and maintenance locks on base frame.

AUTOQUIP 48S40 Scissor Lift.4,000 Lbs Cap., Electro-hydraulic operation. -- 48" x 96" Smooth steel platform. Base frame 24" x 64". -- 7" Lowered height, 48" travel to raised height of 55"; internally mounted 1.5 HP Super Torque TENV motor, 1-cylinder design. -- Complete with: Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on base frame. -- Options: Up to 48" x 96" smooth steel platform, guarded foot pedal control, accordion skirt. -- AUTOQUIP Series 35, Surface mounted lift. Unit is painted AQ Black;

AUTOQUIP 36S25 Scissor Lift. 2,500 Lbs Capacity and 36" x 48" Platform with 24" x 48" base frame. -- 12-Second travel time. -- 6-1/2" Lowered height. -- 36" Travel to raised height of 42-1/2". -- Electro-hydraulic, 1-Cylinder design. -- Internally mounted Super Torque 1.5 HP TENV motor with prewired motor starter. -- 24 Volt Control transformer, -- 10' Straight SO cord with hand held up/down 24 V push button. -- 10' SO Power cord. -- Options: Foot pedal control, oversized platform up to a max. of 48" x 72".

AUTOQUIP 48S25 Scissor Lift.2,500 Lbs, Electro-hydraulic, 24" x 64" standard platform and 24" x 64" base frame. -- 7" Lowered height, 48" travel to raised height of 55"; .75 HP TENV motor, 1-cylinder design. -- Complete with: Hand held push button control with 10' cord. -- Options: Max. platform size up to 48" x 96", foot pedal control, accordion skirt ask for pricing.(Standard specs)

AUTOQUIP 60S60 Scissor Lift.6,000 Lbs. Cap., electro-hydraulic operation. -- Large 48" x 120" smooth steel platform. Base frame 32" x 87". -- 8" Lowered height, 60" travel to raised height of 68"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (44) Sec travel time up-or-down. -- Complete with: Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 60" x 120" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 60S100 Scissor Lift10,000 Lbs Cap., electro-hydraulic operation. -- Standard 32" x 90" smooth steel platform. Base frame 32" x 87". -- 12" Lowered height, 60" travel to raised height of 72"; internally mounted 5 HP Super Torque TENV motor, 2.8 GPM, 2-cylinder design, (36) Sec travel time up-or-down. -- Complete with: Wall mount up/down push button control with 20' cord (pre-wired), velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 60" x 120" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 36S60 Scissor Lift;6,000 Lbs Capacity and electro-hydraulic operation. -- 36" x 60" Smooth steel platform. Base frame is 24" x 48". -- 6.5" Lowered height, 25 Sec travel speed to a raised height of 42.5"; Internally mounted 1.5 HP Super Torque motor, 2-cylinder design. -- Complete with: Hand held control pendant.Autoquip Series 35, Surface mounted lift.

AUTOQUIP 60S40 Scissor Lift.4,000 Lbs. Cap., electro-hydraulic operation. -- Standard 32" x 87" smooth steel platform. Base frame 32" x 87". -- 8" Lowered height, 60" travel to raised height of 68"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (44) Sec travel time up-or-down. -- Complete with: Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 60" x 120" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 48S80 SCISSOR LIFT.8,000 Lbs Cap., electro-hydraulic operation. -- Standard 24" x 64" smooth steel platform. -- 7.5" Lowered height, 48" travel to raised height of 55.5"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (33) Sec travel time up-or-down. -- Complete with: Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 48" x 96" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 60S25 Scissor Lift.2,500 Lbs. Cap., electro-hydraulic operation. -- Standard 32" x 87" smooth steel platform. Base frame 32" x 87". -- 8" Lowered height, 60" travel to raised height of 68"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (44) Sec travel time up-or-down. -- Complete with: Hand held, push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 60" x 120" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 36S40 DL Double Long Scissor Lift.4,000 Lbs. max. cap. with 48" x 120" smooth steel platform top. -- 36" Travel with a 6.5" lowered height and a 42.5" raised height; (25) Sec up and down speed. Base frame 24" x 98". -- Power unit with 1.5 HP Super Torque Motor, 208-230-460V - 3 Ph - 60 Cy, fan-cooled, Intermittent (2 minute) duty. -- Polyethylene hydraulic fluid reservoir with a capacity of 5 gallons. Supply voltage must be specified. -- Complete with; Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe, -- Option; Guarded foot pedal control.. NOTE: Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 48S40 DL Double Long Scissor Lift.4,000 Lbs. max. cap. with 48" x 144" smooth steel platform top. -- 48" Travel with a 7" lowered height and a 55" raised height; (32) Sec up and down speed. Base frame 24" x 130". -- Power unit with 1.5 HP Super Torque Motor, 208-230-460V - 3 Ph - 60 Cy, fan-cooled, Intermittent (2 minute) duty. -- Polyethylene hydraulic fluid reservoir with a capacity of 5 gallons. Supply voltage must be specified. -- Complete with; Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe, -- Option; Guarded foot pedal control.. NOTE: Surface mounted lift. Unit is painted AQ black;

Baileigh DC-2100C Cyclone Dust CollectorSpecifications: -- 3 HP motor -- 2,111 CFM -- (1) Micron filter -- Hand crank system to clean the filter canister -- 3 Ports for multiple machine hookup -- Locking swivel castors on base -- Remote controlled start and shutoff capability -- 63-Gallon drum

BAKER Model BBR-O Single head equipped with: -- Separate 20 HP TEFC motor, -- Hydraulic feed drive via a 2 HP pump motor, -- 0 - 90 FPM variable feed speed. -- Endless flat belt infeed w/floating overhead feed rollers, each is hydraulically powered; spring blade tensioning. -- 3/4" - 7" Cutting width, 1/4" - 7" cutting height, uses 0.035" x 1" x 13'-2" blade length; BAKER flat guides for higher production, accuracy & extended blade life.

2-Head, 20 HP TEFC motor, hydraulically driven feed from head motor, feed speed from 20 - 120 FPM, feed works with 6" wide rough top belt conveyor on self-centering rollers, and holddown wheel. -- Mechanical spring blade tensioning, 0.035" x 1" x 13-1/6' blades, 0.072" kerf; BAKER flat guides for higher production, accuracy & extended blade life.Missing blade cover doors but otherwise was working fine when taken from service.

BALEMASTER 772 AO WIDE MOUTH HORIZONTAL BALER -- 25 HP motor -- Dual door cylinder -- Bale size 48" W x 26" H x 48" L -- Feed chute cross section 46" W x 48" L -- Air to Oil cooler included -- Number of bale ties 5 -- Loaded on your truck