DAC-3000 DENSACAN - Can Denisfier with Infeed Conveyor and Surge Hopper --DENS-A-CAN DAC 3000 densifier is specifically designed to densify ALUMINUM and STEEL food or beverage containers into high density interlocking biscuits that meet the aluminum and steel industry requirements. --The DAC 3000 will also process full beverage containers, trim stock, aerosol cans and like materials. Along with the high density biscuits, the DAC 3000 will process tin food containers into low density biscuits approved by the detinners. The process of switching from the high density biscuit to the low density biscuit is done by simply turning a switch on the control panel. Being direct charge makes the DAC 3000 well suited for a surge/storage hopper, in which the DAC 3000 is placed directly beneath a surge hopper. The 3000 may be purchased with an optional stand-alone separator. --The DAC 3000 is designed for the larger processor of cans. The DAC 3000 minimizes strokes and gets maximum production with fewer moving parts. Like all DENS-A-CAN equipment, it is simple to operate, highly reliable, and easy to maintain. --“STATE-OF-THE-ART"; ENGINEERING: • Fully automatic with manual override switches. • Two convenient density setting options from the control panel: one for aluminum, the other for steel cans. • Automatic biscuit size control, automatically adjusts for whole, mixed, or flat cans. • Agitator system breaks up can bridging even from the largest of surge hoppers. • Thermostat controlled heater and self contained cooler/filtration system. • High and low oil temperature protection. • Latest electronic and hydraulic controls utilizing tie rod cylinders. • TEFC motors and sealed electrical enclosures. • Reinforced heavy duty compression chamber with tongue and groove tracking system eliminates cylinder rod lift. • Four edged hardened tool steel cutter bar. • All components are easily accessible with fewer moving parts and sensing components. Wear areas are bolted for ease of service. The DAC 3000 Direct Charge densifier is perfect for the larger processor and material recovery facility, that needs a fully automatic high production densifier.

DENS-A-CAN DAC-600 Can DensifierSpecificationsAll DENS-A-CAN Densifiers feature high-quality hydraulic components, advanced manifold construction, and straight-thread O-ring fittings to minimize leakage. The DAC 600 is fully automatic and will run continuously, as long as cans are being fed. It features an automatic shut off when empty.Direct Charge is the processing of cans without the need for any preprocessing like pre-weighing. The DAC 600, like all DENS-A-CAN Densifiers, can be placed directly beneath a surge storage system.Can bridging is eliminated by the use of an agitator. The agitator rotates when the single compression ram is retracting; the rotating agitator breaks bridging and forces the cans into the compression chamber. The DAC 600 is fully assembled and mounted on casters to allow for easy cleanup. After the tank is filled with oil and electricity is run to the machine, it is ready to operate!All service areas of the DAC 600 have ample access. All wear components are bolted and designed for easy replacement.Capacity in pounds/hour: -- Aluminum: 600 --Aluminum Flat: 800 -- Bi-Metal: 1,020 -- Biscuit Description: -- Typical size: 8' x 10' x 11' with integral banding grooves. -- Weight and density of a typical biscuit: -- Aluminum cans- 20/22 lbs. each or 40/43 lbs./cu. ft. typical. -- Bi-Metal cans - 35 lbs. ea or 70 lbs./cu. ft. typical. -- Banded Bundle typical size and weight: 125 Biscuits, 40' x 50' x 55; no skid or pallet needed. -- Aluminum beverage cans: 2,500 Pounds -- Bi-Metal cans: 4,375 Pounds -- 40' Trailer capacity: (18) Bundles. -- Standard Power: 10 HP - 240 V, 3-Phase, 40 Amps -- Approx. weight with conveyor: 2,600 Lbs -- Hydraulic reservoir capacity: 30 Gallons

ECONOMY BALER - 5042E840F, Auto-Tie Open-End Horizontal Baler with ConveyorSpecifications: -- Cylinder: 8" -- Main motor: 40 HP -- Feed opening: 50" x 42" -- Bale size: 40" x 40" variable -- OCC Bale weight: 1,700 - 2,000 LbsEquipped with: -- Infeed Conveyor -- Open-End

ENTERPRISE 2 RAM Horizontal Baler --300hp --Overall Length - 33' 7' x Width 17'3" --Charging Chamber - 28"D x 60" W x 110" L -- Approx Bale Size 31" x 45" x 62"

EXCEL - 2R10, ...Horizontal Auto-Tie BalerSpecifications: -- Main cylinder: 10"; -- Eject cylinder: 9";; 6"; Bore -- Cycle time: 16 Seconds -- Bale size: 60"; x 45"; x 30"; -- System pressure: 3,000 PSI -- Oil reservoir: 600 Gallons -- Platen force: 235,619 Lbs -- Main motor: (2) 50 HPEquipped with: -- U.S. Wire Tie -- Standard with either left-hand or right-hand eject -- Operator-free operation -- 50 HP TEFC Motor -- "EXCEL Autonetics" with absolute RAM position sensor with electronic display -- U.S. Wire Tie Systems "Automatic 342 Tier" with Turbo Motor -- Industrial Hardened Logic Controller -- Fully lined with: AR "Hardox 400" Replaceable wear liners -- 300-Gallon Hydraulic Reservoir with: Regenerative Circuit (600-gallon 2R10) -- Upper & lower photo eyes (sender/receiver upper photo eye with: Integrated Conveyor control) -- NEMA 12-Rated enclosures and controls with conveyor starter -- CASTELL Key Safety Interlocking Entry System -- Bale Chamber penetration: 2R9 - 27 In.; 2R10 - 24 In. -- Automatic bale release door -- Automatic shear jam correction

EXCEL 2R10 Horizontal Auto-Tie Baler with ConveyorSpecifications: -- Main cylinder: 10"; -- Eject cylinder: 9";; Bore 6"; -- Cycle time: 16 Sec -- Bale size: 60"; x 45"; x 30"; -- System pressure: 3,000 PSI -- Oil reservoir: 600 Gallons -- Platen force: 235,619 Lbs -- Main motor: (2) 50 HPEquipped with: -- Bale Discharge Platform -- Steel Belt Feed Conveyor -- Automatic bale release Door -- US Wire Tie -- Standard with either left-hand or right-hand eject -- Operator-free operation -- 50 HP TEFC Motor -- EXCEL Autonetics with absolute RAM position sensor with Electronic display -- US Wire Tie Systems - Automatic 342 Tier with Turbo Motor -- Industrial Hardened Logic Controller -- Fully lined with Hardox® 400 replaceable wear liners -- 300-gallon Hydraulic Reservoir with regenerative circuit (600-gallon 2R10) -- Upper & lower photo-eyes (sender/receiver upper photo-eye with integrated Conveyor control) -- NEMA 12 Rated enclosures and controls with Conveyor starter -- CASTELL key safety interlocking Entry System -- Bale Chamber penetration (S2R9: 27";; 2R10: 24";) -- Automatic bale release door -- Automatic shear jam correction -- Bale discharge platform

EXCEL - 2R10, ...Horizontal Auto-Tie BalerSpecifications: -- Main cylinder: 10"; -- Eject cylinder: 9";; 6"; Bore -- Cycle time: 16 Seconds -- Bale size: 60"; x 45"; x 30"; -- System pressure: 3,000 PSI -- Oil reservoir: 600 Gallons -- Platen force: 235,619 Lbs -- Main motor: (2) 50 HPEquipped with: -- U.S. Wire Tie -- Standard with either left-hand or right-hand eject -- Operator-free operation -- 50 HP TEFC Motor -- "EXCEL Autonetics" with absolute RAM position sensor with electronic display -- U.S. Wire Tie Systems "Automatic 342 Tier" with Turbo Motor -- Industrial Hardened Logic Controller -- Fully lined with: AR "Hardox 400" Replaceable wear liners -- 300-Gallon Hydraulic Reservoir with: Regenerative Circuit (600-gallon 2R10) -- Upper & lower photo eyes (sender/receiver upper photo eye with: Integrated Conveyor control) -- NEMA 12-Rated enclosures and controls with conveyor starter -- CASTELL Key Safety Interlocking Entry System -- Bale Chamber penetration: 2R9 - 27 In.; 2R10 - 24 In. -- Automatic bale release door -- Automatic shear jam correction

EXCEL - 2R10, ...2-Ram Horizontal Baler with Infeed ConveyorSpecifications: -- Main motor: (2) 50 HP -- Main cylinder: 10"; -- Eject cylinder: 9"; -- Pit section length with incline: 20’Equipped with: -- US Wire Tier -- Steel belt feed conveyor

EXCEL 2R63 2-Ram Horizontal BalerSpecifications: -- Main Cylinders: Twin 6" -- Eject Cylinder: 6" -- Main motor: 20 HP -- Cycle Time: 29 Sec -- Overall Force: 159,467 Lbs -- Feed Opening: 60" x 54" -- Bale Size: 60" x 48" x 30"Equipped with: -- U.S. 343 13 Gauge Wire Tier

EXCEL EX60(Non-Ferrous) Horizontal Closed Door Baler With In Feed ConveyorSpecifications: -- Motor: 20 HP. -- Cylinder: 9". -- Ram Force: 190,851 Lbs. -- Feed Opening: 40" x 55". -- Full Bale Chamber Penetration. -- Wear Liners: Hardrock 400 -- Automatic Shear Jam Correction.Price includes Loading onto your Truck.

EXCEL EX-62 Horizontal Closed Door Baler Specifications: -- Feed Opening: 54" x 35" -- Main motor: 20 HP -- Cylinders: (2) 6" -- Total Ram Force 159,400 lbsFeatures: -- Removable shear blade -- Tongue and groove floor -- Full Penetration -- Loaded on your truck

GREEN - 60" X 27', ...Steel Belt Type ConveyorSteel Belt Feed Conveyor -- Width: 60" -- Length: 27 Feet -- Lower Horizontal: 10-1/2 Feet -- Drop Off: 10 Feet -- Working: Fine -- Loaded onto your Truck

GREENMAX - EPS-AC-100, ...Cold Press DensifierSpecifications: -- EPS Polystyrene Foam Densifier -- Ratio: 50 to 1 -- Volume: 220 Lbs/Hr -- No Conveyor -- Loaded ont your Truck

GREENMAX C100 SCREW COMPACTOR with Infeed ConveyorSpecifications: •Screw compression technology, Lower utility consumption, and higher efficiency•Able to deal with fish boxes that contain water•CE approved and comply with UL/CSA standards•A speed control device is designed to prevent EPS from melting•Reputable & High-quality components make the machine reliable and durable•SIEMENS control system guarantees easy and simple operation. --Capacity 220lbs/hr

(8) HARMONY - M60-CB, ...Vertical BalersLot of (8) Balers: Loaded on your truck!Specifications: -- Bale size: 60" x 30" x 48" -- Cylinder: 6" x 48" -- Motor: 5 HP -- Hi/Lo Power Unit

(4) HARMONY - M60-CB, ...Vertical Balers with (1) PTR 3400-HD. ...Vertical BalerLot of (5) Vertical Balers; with free loading onto your truck.Specifications:Cylinder: 6"Power unit: 10 HP

HARRIS PIRANHA Full Closed Door Horizontal BalerSpecifications: -- Cylinder: 10" -- Main motor: 20 HP -- Feed opening: 56" x 36"Equipped with: -- Full Pen

HARRIS HAL-60NF-FE-FP NON-FERROUS Closed Door Horizontal Baler with ConveyorSpecifications: -- Main cylinder: 10" -- Main motor: 75 HP -- Bale size: 45" x 30" x 60" -- Feed opening: 60" x 54" -- Door cylinder: 5" -- Cycle time: 15 sec (no load)Equipped with: -- 48"W Steel Pan Infeed Conveyor

HARRIS HRB-SR 2-Ram Horizontal BalerBC-011225: -- Main motor: 100 HP -- Cylinder: 12" -- Bale size: 45" x 45" x 56" -- Force: 198 Tons -- Bale ejector bore: 8" -- Bale ejector force: 88 Tons -- Side ram bore: 6" -- Side ram force: 9 Tons

HARRIS HLO-608-AR30 Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8" -- Feed opening: 60" x 45" -- Main motor: 30 HP -- Bale size: 48" x 40" x VariableEquipped with: -- Auto-Tie system -- Automatic cycle