You Have Selected
 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
24 Results Found for Pallet Viewing 1 - 24 of 24 results
Call for Price
(3) units available Commercial Bandsaw 21" Variable Blade Speed , 328ft/min-3,937ft/min Automated adjustable speed table Table Stroke 47-1/4" Table width-62" Throat-19-3/4" Max Vertical blade height/opening- 14-3/8" 2 HP Dust Hoods Included The owner has confirmed that these Ando saw's are in good working/running condition and are ready to load!
Equipment Location:AL
Call for Price
Specs (to be confirmed): 24" Wide x 6" capacity Single Arbor Misc Blades and spacers included 100 HP Motor on saw 30 HP Motor on Sizer
Equipment Location:VA
Call for Price
2-Head Resaw Return conveyor
Equipment Location:Monroe, VA
Call for Price
Model GE 2000 3E 3-head Resaw This machine will need work to be put back into service
Equipment Location:NC
Call for Price
(2) 40 HP Motors Infeed This machine is ready to be loaded!
Equipment Location:NY
Call for Price
Cornell Gang Rip Saw
Equipment Location:Monroe, WV
Call for Price
Hydraulic Infeed & Outfeed Rolls Cutting capacity: 8" x 12" Hydraulic blade movement 20 HP Blade motor 2 HP Hydraukic motor Up to 24" blade
Equipment Location:IL
Call for Price
TRIMMER with infeed, conveyors and dust collection manifold: 20' Machine with (6) saws set to trim 2"x2" - 2"x6" lumber 7.5 HP Motors on each saw with 22" carbide blades Each saw has quick adjustment feature to minimize downtime Built in transfer chain with hook stops, limit switch and photo cells for automation Built in pinch roll system with even end verification to ensure zero end trim (7) Star wheels with square bottom position under saw blades for cut lumber Currently has adjustable stops for 36-7/8", 39-7/8" & 47-7/8" board lengths Control panel is mounted on a swing arm and controls everything from the breakdown hoist through the outfeed conveyor. Lumber discharge belt and waste belt mounts under the machine and are hydraulically driven CHAMFER machine: Heavy plate steel construction with access doors (2) 7.5 HP 3600 RPM motors with grease lock arbor adapters Fixed lower head and moveable top head with grease lock moulder heads Removable polished steel bed plate and straight edge guides material through the machine Fixed vertical feed rolls and outside spring loaded feed rolls Upper spring loaded hold down shoe prior to top head to eliminate chatter Free standing control panel Aluminum belt conveyor raises up for service TURNER RESAW with soft start and spare blades: 48" Turner resaw with (4) hydraulic powered feedrolls on standard tipping table 50 HP Main motor with new belts and drive sheave; set for 9,000 RPM blade speed New soft start and local disconnect Air cylinder actuated feed roll "quick open" with remote control All new bearings, bushings and seals throughout the machine New style saw guiddes for "no tool" replacement New paint and guards CONVEYORS: Splitter conveyor: 4' x 16" mounts close to the saw blade, tall steel center rib behind the saw blade for separation, powered by hydraulic motor with flow control and ball valve Long belt conveyor: 10" Wide x 8'10" long with 5.5" tall sides, powered by hydraulic motor, flow control #1 #2 Landing tables: (3) Lines of camel back chainin plastic channel, 4' shaft centers, 39" top of chains, angled landingguide plates with debris shoots, moveable backstop for centering several lengths of material, overhead squaring device, hyradulic motor with flow control #1 and #2 Grading chains: (2) Lines of C-2060 conveyor chain riding in plastic channel spaced 24" apart, 10' 9-3/4" shaft centers, top of chain elevation is 36" (3" lower than landing table:, hydraulic motor with flow control, head end is contstucted to accept tail idlers for an inclideto future stackers
Equipment Location:OR
Call for Price
Max board length and width is 18ft 1" x 61/2" (tip to end is 8") The saw motor is 71/2 HP It has been at least 10 years since machine was powered up and run Blade size is 20" 5-Headed machine 2 conveyors; 1 for cutting and 1 for waste lcon Trim Saw ready for a new owner! Seller is not sure about voltage, but confirms it's a low voltage machine
Equipment Location:NY
Call for Price
This deduster was used daily before shutting down.
Equipment Location:VA
Call for Price
12" Cap. arbor & 6" throat, thickness 1/8" - 3-1/2" using 12" or 14" dia. tooling, 2-3/16" dia. arbor, min. length 22". Arbor Drive: 50 HP - 3,600 RPM TEFC Direct drive motor, electrical lockout on access door, arbor hand brake, and motor load meter. Feed Drive: 3 HP Feed motor, 30 - 150 FPM feed speed, shear pin drive pully. Feed Bed: 5" Pitch double-V chains with extruded aluminum slats & replaceable steel backed rubber inserts, and automatic oil mist lubrication system. Holddowns & bed plate: (4) 3" Dia. spring loaded overhead idle press rolls, (1) full width overhead spring loaded bed plate, thickness adjustment with scale & pointer. 4-light laser
Equipment Location:VA
Call for Price
Min length is 36", max is approx. 72" The width of board and distance between the notchers is adjustable Currently not under power includes unscrambler as well
Equipment Location:VA
Call for Price
25 HP Motor on heads 60" Capacity This machine is reported to be in good working condition.
Equipment Location:VA
Call for Price
75 HP Main Motor 24" Capacity Control Panel w/ Lasers Cameron Automation Scanning System Infeed Deck Ready to disconnect!
Equipment Location:NC
Call for Price
8' Wide x 8'6" Wide x 9'8" Long Nyle Unit is 4-years old Unit does not have power vents. Wood is monitered daily with moisture meters. Seller will load onto truck. This kiln was made with a shipping conatiner and spray foam. Seller uses it for small runs and is upgrading to a larger system.
Equipment Location:VA
Call for Price
Prescott Vertical Resaw 10" Silver Tooth blades; 37'7" Long 72" Bandwheels 250 HP Motor - no starter This saw is no longer required at the current facility. Available for immediate removal!
Equipment Location:GA
Call for Price
Nice Rayco Edge ready to be moved! MOTIVATED SELLER, MAKE OFFER. Video of machine running on website
Equipment Location:NV
Call for Price
Running and in service, per the seller. Has not been out of service since owner purchased it approx 18years ago. Can be wired differently, per seller. Basic Rogers Disc Dismantler.
Equipment Location:NY
Call for Price
7-Head Stenner Resaw Model MHS9 This system was purchased from an old mill and never installed.
Equipment Location:NY
Call for Price
5' Resaw Linebar Infeed Pressrolls Setworks Hands-off Control Booth Transfer Chains Return Roll Case Pop Up Roll Case Electrical Controls VFD Starters Approximately (20) Bands All spare parts included This system is under power until June, 2018. Pricing will include dismantling and loading onto provided trucks.
Equipment Location:NH
Call for Price
SELLER IS READY FOR ALL OFFERS! 15' Powered infeed roller High speed pallet dispenser 1-Man push button control (4) High speed pallet stackers with stop gates and transfers Outfeed gravity rolls from each stacker Stack eject gravity rollers This can be inspected under power Monday - Friday from 8AM to 4PM, call now to set up an inspection! This system is not longer needed by the seller. It is still under power and available for inspection. This was pulled off production about a year ago and they were running about a 1,000 pallets on a full 8 hour shift with the machine.
Equipment Location:MI
Call for Price
Unknown notcher ready for new owner!
Equipment Location:NY
Call for Price
Viking Champion 304A Pallet Nailer with Stacker This machine is still under power and available for inspection.
Equipment Location:NV
Call for Price
2 man operation Accumulation station add on included 6 second machine cycle times Makes both side and center beams Makes beams with and without fillers Templates allow repeatable fixture changes Auto off load release Accommodates beams from 5" to 12" high and up to 84" long This Viking Sprint machine is used for making bedrails. It is still under power and available for inspection. There is a 3 month turnaround from Viking on one of these but this one is ready to go!
Equipment Location:IN