STEFANI - SOLUTION HD, ...w/Premill & Corner Rounding -- Specifications:0.4 - 12 mm (0.47") Edgebanding cap.; 90 mm (3-1/2") min. panel width, 220 mm (8.66") min. length; 10 - 60 mm (2.36") panel thickness; variable feed speed 10 - 30 MPM (33 - 98 FPM). -- Front End equipped with: Premilling, 4.4 kW (6 HP) - 12,000 RPM motors with Servo driven infeed fence. -- Gluing System: Large 22 kG capacity overhead "fast heat-up" granular glue system; Teflon coated lower applicator glue pot; 1" dia. glue applicator roller w/reversible rotation through PC. -- Pressure Section: Servo controlled; (1) large dia. clutch-controlled drive roller, and (5) pneumatic pressure idle rollers.WORKSTATIONS: Edgebanding: -- End Trimming, front & rear beam mounted end trims; 0.35 kW - 12,000 RPM ea.; motors tilt 0° - 22° on horiz. plane. -- Pretrimming (flush): Top & Bottom super imposed 0.75 kW - 12,000 RPM motors. -- Fine Finishing: Top & Bottom flush/bevel/radius trim station, 1 kW - 12,000 RPM ea.; motors bevel from 0° - 30°; Servo motor positioning for easy setup. -- Corner Rounding with: (4) Motors; 0.35 kW - 12,000 RPM each; 2-postition preset trimming through controller. -- Profile Scraping Unit: Top & Bottom for thick PVC, quick change insert knifes for different edge thickness scraping; PVC shavings collection box; air pressure nozzles to support removal. -- Flat Glue Scrapers: Top & Bottom pneumatic controlled scraping knives with bearing guide-wheels. -- Buffing Unit: Top & Bottom oscillating; 0.4 HP - 3,000 RPM motor ea.; units tilt 0° - 10°. -- Reactivation Unit: Top & Bottom hot air blowers to reactivate potential discoloration on certain PVC edges.Control & Operation: -- Windows XP based "WinEdge" Operator interface; unlimited program capacity; input/output on-screen viewing; hour meter; linear foot meter; unlimited program storage; ON/OFF control of all working unit; productivity reports. -- Servo controlled raise & fall of pressure beam; 80 mm V-grooved top belt; 3/4" track chain with "non-slip" chain pads. -- Features & Supplied with: Insulated sound enclosure w/large window area; rotating operator control panel at eye-level height; telescopic panel support; frequency inverter & used tooling. -- Actual Model is STEFANI SOLUTION HDNOTE: Pictured Return Conveyor is "NOT INCLUDED"

STEFANI SOLUTION 8600 (W/PRE-MILL & CORNER ROUNDING) + CNC HORIZONTAL & VERTICAL POSITIONING. Basic Specifications: 0.4 - 25 mm 0,98") Edgebanding cap., 90 mm (3.5")min. panel width, 220 mm (8.66") min. length; 10 - 60 mm (2.36") panel thickness; variable feed speed 10 - 30 MPM (33 - 98 FPM). -- Front-End equipped with: Pre-Milling, 4.4 kW (6 HP) - 12,000 RPM motors with Servo driven infeed fence, 2-Roll Vertical Coil Magazine. -- Gluing System: Large 22 kG capacity overhead "fast heat-up" granular glue system, Teflon coated lower applicator glue pot, 1" dia. glue applicator roller w/reversible rotation through PC. -- Pressure Section: Servo controlled, (1) large dia. clutch controlled drive roller and (5) pneumatic pressure idle rollers.WORKSTATIONS Edgebanding: -- End Trimming, front & rear beam mounted end trims (0.35 kW - 12,000 RPM ea.), motors tilt 0° - 22° on horiz. plane. -- Pre-Trimming (flush), top & bottom super imposed (0.75 kW - 12,000 RPM) motors. -- Fine Finishing: Top & Bottom flush/bevel/radius trim station (1 kW - 12,000 RPM ea.), motors bevel from 0° - 30°, Servo motor positioning for easy setup. -- Corner Rounding with: (4) Motors (0.35 kW - 12,000 RPM each); 2-postition preset trimming through controller. -- Profile Scraping Unit: Top & Bottom for thick PVC, quick change insert knifes for different edge thickness scraping; PVC shavings collection box; air pressure nozzles to support removal. -- Flat Glue Scrapers: Top & Bottom pneumatic controlled scraping knives with bearing guide-wheels. -- Buffing Unit: Top & Bottom oscillating (0.4 HP - 3,000 RPM motor ea.), units tilt 0° - 10°. -- Reactivation Unit: Top & Bottom hot air blowers to reactivate potential discoloration on certain PVC edges.Control & Operation: -- Windows XP based "WinEdge" operator interface, unlimited program capacity, input/output on-screen viewing, hour meter, linear foot meter, unlimited program storage, ON/OFF control of all working units, productivity reports. -- Servo controlled raise & fall of pressure beam, 80 mm V-grooved top belt; 3/4" track chain with "non-slip" chain pads. -- Features & Supplied with: Insulated sound enclosure w/large window area, rotating operator control panel at eye-level height, telescopic panel support, frequency inverter & used tooling. -- Actual Model is STEFANI SOLUTION 8600

STEFANI - MD, ...Production Edgebander with EVA & PUR Gluing System, Premilling & Corner RoundingBasic Specifications: -- 0.3 - 15 mm Edgebanding cap., panel thickness (min./max.) 10 - 60 mm; panel width min. 90 mm (3-1/2"); panel length min. 140 mm (5-1/2"); variable feed speed 10 - 25 MPM (33 - 82 FPM).Frontend equipped with: -- Air Cushion infeed table: To facilitate insertion of workpieces; 600 mm x 1,600 mm. -- Premilling: (2) Motors, 4 kW (5.3 HP) - 12,000 RPM ea. -- Horizontal Coil Magazine; spraying unit (Anti-sticking liquid).Gluing System: -- Hot Melt Glue + Quick Melt System; additional PUR Glue Pot.Pressure Section: -- (1) Large dia. clutch controlled drive roller and (4) pneumatic pressure idle rollers.WORKSTATIONS: -- End Trimming: Front & Rear (0.55 kW - 12,000 RPM ea.); motors tilt 0° - 22° on horiz. plane. -- Rough Trimming Unit: Top & Bottom flush trimming (0.55 kW - 12,000 RPM ea.) with pneumatic setting for flush or slight overhang. -- Fine Trimming Unit: Top & Bottom radius or chamfer trimming, Servo driven positioning to process up to (3) radii and chamfer trimming; tiltable from 0° - 25°. -- Corner Rounding Unit: (2) Motors (0.35 kW - 12,000 RPM each); for complete panel machining with double corner rounding and top & bottom edge trimming function; automatic positioning to change between radius and chamfer trimming. -- Multi-Profile Scraping Unit: Top & Bottom for thick PVC; automatic positioning for different edge thickness and radius scraping; PVC shavings collection box; air pressure nozzle to support removal. -- Flat Glue Scrapers: Top & Bottom pneumatic controlled scraping knives with bearing guide wheels. -- Buffing Unit: Top & Bottom oscillating (0.3 kW - 3,000 RPM ea. motor); units tilt 0° - 15° with hot air blower to restore edge color; an adjustable heater up to 3,500 Watts.CONTROL & OPERATION: -- Maestro Pro Edge: 21-1/2” Touchscreen graphic interface; dynamic virtual process preview; real time status and user-friendly interface; automatic batch size, one processing with function and tools for a separate working unit management. It is not necessary to empty the machine when changing programs. -- Just In Time piece & edge programming in (10) Sec combined with Pro-Edge functions: Extremely fast and highly qualified processing mode (including edge tolerance compensation). . -- Servo controlled raise & fall of pressure beam, 80 mm V-grooved top belt; 3/4" track chain with "non-slip" chain pads.Features Include: -- Insulated sound enclosure w/large window area; rotating operator control panel at eye-level height; telescopic panel support, frequency inverter.