SNX NVISION SYSTEM2 G3 Edgebanders For Sale
Category
Edgebanders
Manufacturer
SNX
Model
NVISION SYSTEM2 G3
3 Results Found
SNX - nVISION System2 G3, ...SEMI-AUTOMATIC CONTOUR EDGEBANDER: -- Specifications: Curved (Contour) Edgebander to allow 360° edgebanding to contoured (shaped) panels.Edgebanding is applied automatically as part is advanced past the edgebanding workstations via turntable.Reduced learning curve/expertise for operation as operator simply loads part to vacuum turntable, then activates the edgebanding cycle. -- Working Capacity: The "nVision" Contour Bander can band a minimum material size of 150 mm (6") diameter.Max. material size: 2,400 x 2,400 mm (94" x 94"); max. material weight: up to 104.5 kG (230 Lbs).Material thickness from 10 - 60 mm (0.4" - 2.36"); banding thickness from 0.5 mm thin tape w/low temp adhesive - 3 mm tape. -- Radii Capacity:Min. internal (inside) radius 80 mm (3.14"); min. external (outside) radius 30 mm (1'-18") based on 1 mm thick edge tape. ● Edgebanding thickness: 1 mm, min. = R 30 mm. ● Edge thickness: 2 mm, min. = R 50 mm. ● Edge thickness 3 mm, min. = R 80 mm. ● Panel thickness 10 - 60 mm with edge thickness 1 mm. ● Panel thickness 10 - 60 mm with edge thickness 2 mm. ● Panel thickness 10 - 45 mm with edge thickness 3 mm.IMPORTANT: ALL minimum & maximum radii are affected by tape thickness, quality of adhesive, and edgebanding being applied. Radius size dramatically affected by adhesive temperature and quality of edge tape, semi or rigid. -- Equipped with:Thermal-regulated glue pot heated via (2) 800-Watt heating elements with electronic temperature controls; holds up to 1 kG (2.2 Lbs) of granules. (2) Pressure rollers to copy the shape of the piece; automatic guillotine for coiled material up to 3 mm (0.11") thickness & 57 mm height (0.125" - 2.25"). -- Features: Laser for easy length identification with closed parts without the need for additional length measurement.The Laser also detects a tight radius and will automatically slow the speed + resume the set speed when the detected radius has passed.The machine is still equipped with the foot pedal for manual control/intervention. Motorized turntable for automated edgebanding application to large panels.Holding or support arm has a large interchangeable vacuum pod to secure panels for edging and trimming.NOTE: Panels can be irregular in shape but must conform to the min. tolerances of inner & outer radii and fit within the work area. -- Complete with: ● Top & Bottom Trimming unit. ● Centralized control panel with individual controls for all stations to enable manual feeding of panels if desired. ● Banding Station. ● Edgebander Coil Stand. ● Standard size vacuum pod for articulated arm. ● 80 mm (3") Dia. dust extraction outlet. ● Foot pedal activation/deactivation control. ● Larger feed roller. ● QC Glue tank with sensor. -- Actual Model is: SNX nVISION System2 G3
SNX - nVISION System2 G3, ...Semi-Automatic Contour Edgebander -- Specifications: Curved (Contour) Edgebander to allow 360° edgebanding to contoured (shaped) panels.Edgebanding is applied automatically as part is advanced past the edgebanding workstations via turntable.Reduced learning curve/expertise for operation as Operator simply loads part to vacuum turntable, then activates the edgebanding cycle. -- Working Capacity: The "nVision" Contour Bander can band a minimum material size of 150 mm (6") dia.Max. material size 2,400 x 2,400 mm (94" x 94"); max. material weight up to 104.5 kG (230 Lbs).Material thickness from 10 - 60 mm (0.4" - 2.36"); banding thickness from 0.5 mm thin tape w/low temp adhesive - 3 mm tape. -- Radii Capacity:Min, internal (inside) radius 80 mm (3.14"); min. external (outside) radius 30 mm (1'-18") based on 1 mm thick edge tape. ● Edgebanding thickness: 1 mm, min = R 30 mm. ● Edge thickness: 2 mm, min = R 50 mm. ● Edge thickness: 3 mm, min = R 80 mm. ● Panel thickness: 10 - 60 mm with edge thickness 1 mm. ● Panel thickness: 10 - 60 mm with edge thickness 2 mm. ● Panel thickness: 10 - 45 mm with edge thickness 3 mm.IMPORTANT: ALL minimum & maximum radii are affected by tape thickness quality of adhesive and edgebanding being applied. Radius size dramatically affected by adhesive temperature and quality of edge tape, semi or rigid. -- Equipped with:Thermal regulated glue pot heated via (2) 800 Watt heating elements with electronic temperature controls; holds up to 1 kG (2.2 Lbs) of granules. (2) Pressure rollers to copy the shape of the piece; automatic guillotine for coiled material up to 3 mm (0.11") thickness & 57 mm height (0.125" - 2-1/4"). -- Features: Laser for easy length identification with closed parts without the need for additional length measurement.The Laser detects a tight radius and will automatically slow the speed + resume the set speed when the detected radius has passed.The machine is equipped with the foot pedal for manual control/intervention. Motorized turntable for automated edgebanding application to large panels.Holding or support arm has a large interchangeable vacuum pod to secure panels for edging and trimming.NOTE: Panels can be irregular in shape but must conform to the min. tolerances of inner & outer radii and fit within the work area. -- Complete with: ● Top & Bottom Trimming unit ● Centralized Control Panel with individual controls for all stations to enable manual feeding of panels, if desired ● Banding station ● Edgeband coil stand ● Standard size vacuum pod for articulated arm ● 80 mm Dia., (3") dust extraction outlet ● Foot pedal activation/deactivation control ● Larger feed roller ● QC Glue tank with sensor -- Actual Model is: SNX nVISION System2 G3
Call for Price
SNX nVISION System2 G3 SEMI-AUTOMATIC CONTOUR EDGEBANDER + Optional Dual Telescoping Arms for simultaneous Contour Banding & Trimming. -- Specifications: Curved (Contour) Edgebander to allow 360° edgebanding to contoured (shaped) panels.Edgebanding is applied automatically as part is advanced past the edgebanding workstations via turntable.Reduced learning curve/expertise for operation as operator simply loads part to vacuum turntable, then activates the edgebanding cycle. -- Working Capacity: The "nVision" Contour Bander can band a minimum material size of 150 mm (6") diameter.Maximum material size: 2,400 x 2,400 mm (94" x 94"); maximum material weight: up to 104.5 kG (230 Lbs).Material thickness from: 10 - 60 mm (0.4" - 2.36"); banding thickness from: 0.5 mm thin tape w/low temp adhesive - 3 mm tape. -- Radii Capacity:Minimum internal (inside) radius: 80 mm (3.14"); minimum external (outside) radius: 30 mm (1'18"), based on 1 mm thick edge tape. ● Edgebanding thickness: 1 mm, min = R 30 mm. ● Edge thickness: 2 mm, min = R 50 mm. ● Edge thickness: 3 mm, min = R 80 mm. ● Panel thickness: 10 - 60 mm with edge thickness 1 mm ● Panel thickness: 10 - 60 mm with edge thickness 2 mm ● Panel thickness: 10 - 45 mm with edge thickness 3 mmIMPORTANT: ALL minimum & maximum radii are affected by tape thickness, quality of adhesive, and edgebanding being applied. Radius size dramatically affected by adhesive temperature and quality of edge tape, semi or rigid. -- Equipped with:Thermal regulated glue pot heated via (2) 800-Watt heating elements with electronic temperature controls; holds up to 1 kG (2.2 Lbs) of granules. (2) Pressure rollers to copy the shape of the piece; automatic guillotine for coiled material up to 3 mm (0.11") thickness & 57 mm height (0.125" - 2.25"). -- Features: Laser for easy length identification with closed parts without the need for additional length measurement.The Laser also detects a tight radius and will automatically slow the speed + resume the set speed when the detected radius has passed.The machine is still equipped with the foot pedal for manual control/intervention. Motorized turntable for automated edgebanding application to large panels.Holding or support arm has a large inter-changeable vacuum pod to secure panels for edging and trimming.NOTE: Panels can be irregular in shape but must conform to the min. tolerances of inner & outer radii and fit within the work area. -- Complete with: ● Top & Bottom Trimming unit .● Centralized control panel with individual controls for all stations to enable manual feeding of panels if desired. ● Banding station. ● Edgebanding coil stand. ● Standard size vacuum pod for articulated arm. ● 80 mm (3") Dia. dust extraction outlet. ● Foot pedal activation/deactivation control. ● Larger feed roller. ● QC Glue tank with sensor. -- Options include:(1) Additional Telescoping Actuator arm & foot pedal for si