2015 Cantek FL-08 Jointer and Finger Jointer$88,500

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Jeff Terrill

800-374-5009 ext:349

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=56511&FILE=THMB_FJ-0106341.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=56511&FILE=THMB_FJ-0106342.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=56511&FILE=THMB_FJ-0106343.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=56511&FILE=THMB_FJ-0106344.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=56511&FILE=THMB_FJ-0106345.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=56511&FILE=THMB_FJ-0106346.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=56511&FILE=THMB_FJ-0106347.jpg" />

Description

 

CANTEK FL-08 Automatic Vertical Finger Joint Line - with the Following: -- MODEL "F-I29-T2" Automatic Infeed Table -- Table Size is 35” long x 23” wide and equipped with 1/2 HP motors. "F-C07" Auto Finger Joint Shaper, Left and Right Sides:Incoming Block Capacity: -- Block Lengths from 5.9” to 35.4” -- Block Widths with Vertical Jointing from 0.78” to 2.36”. -- Block Width with Horizontal Joint up to 6” (wider possible – optional). -- Thickness, Vertical Jointing from 0.78” to 6.3”. -- Thickness Horizontal Jointing from 0.78” to 2.36”.Specifications: -- 20 HP Motor for Shaper Spindle. -- 5 HP Motor for Trim Saw. -- 2 HP Motor for Bottom Scoring Saw. -- 1/2 HP for Feed Conveyor with Variable Speed Frequency Drive. -- Cycle Speed of max. 3~4 Cycles/Min. -- Note: Right side Shaper equipped with roller type glue applicator. "F-D16" Transfer Roller (From RH Shaper to Assembly Machine) -- Table Size: 23.6" wide x 35.4” long."F-A05-6" Two-Staqe Auto Finger Assembler -- Output Length: Up To 236” - 19.68’. -- Width from 0.78” to 6.3”. -- Thickness from 0.78” to 2.36”. -- 2 HP Drive for Feed Table. -- 5 HP Motor for Cut Off Saw. -- 5 HP Motor Hydraulic Pump. -- Speed of approx. (4) to (5) Finished boards/Min. All Electrics are to UL/CSA Standards with Wye Delta – Includes Soft Starter.Includes: Extra belts, blocks, cutter heads and some knives. Note: This system performs best when incoming blocks are run thru a 4-Sided Planer or Moulder.Production Example running 2" x 6" Blocks: -- 1-1/2" x 5-1/2" Blocks, 23.6" table = (15) blocks per cycle. -- (3) Table cycles per minute x 15 Blocks = (45) blocks per minute. -- (4) Table cycles per minute x 15 Blocks = (60) blocks per minute. Average Block Length of 24" = 90 to 120 LINEAL FPM

Details

Year:2015

Make:Cantek

Model:FL-08

Stock Number:FJ-010634

Location:WEST COAST,


SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Jeff Terrill

800-374-5009 ext:349

View Seller's Entire Inventory and Information