1995 I M A NOVIMAT 12/275 ST EdgebanderCall for Price

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Karl Balg

800-374-5009 ext:355

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55448&FILE=THMB_EO-0121961.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55448&FILE=THMB_EO-0121962.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55448&FILE=THMB_EO-0121963.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55448&FILE=THMB_EO-0121964.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55448&FILE=THMB_EO-0121965.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55448&FILE=THMB_EO-0121966.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55448&FILE=THMB_EO-0121967.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55448&FILE=THMB_EO-0121968.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55448&FILE=THMB_EO-0121969.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55448&FILE=THMB_EO-01219610.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55448&FILE=THMB_EO-01219611.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55448&FILE=THMB_EO-01219612.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55448&FILE=THMB_EO-01219613.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55448&FILE=THMB_EO-01219614.jpg" />

Description

 

IMA NOVIMAT 12/275 ST Edgebander with Pre-mail and Corner Rounding; 0.4 - 3 mm Edgebanding thickness cap,, with all stations, and fully equipped, Specifications: -- 10 - 60 mm Panel thickness (min. 10 mm - 40 mm with contour trimming, max. 60 mm without contour trimming); -- Min panel width 65 mm, minpanel length 150 mm, edge length min. 250 mm with material up to 3 mm). -- Ability for strip & solid edgebanding up to 3 mm, HD reinforced guillotine for 3 mm PVC.Infeed Section/Work stations: -- Pre-Milling station with (2) motors @ 12,000 RPM each. -- Infrared Heating unit for side of panel set before the Gluing unit. -- Gluing & Pressure Station: Pre-Melter located over Glue Pot; (8) Pressure rollers with (1) large driven roller & (7) conical small rollers. Work Stations: -- Horizontal End Trimming unit (2 motors - 12,000 RPM); Unit is mounted on top pressure beam for easy adjustment. -- Top & Bottom Rough trimming unit (0.67 HP - 12,000 RPM) motors. -- Top & Bottom Fine Trim station for Profile or Bevel trimming (0.67 HP - 12,000 RPM) motors. -- (4) Motor Corner Rounding station for Leading & Trailing corners of panel when banding all (4) sides (0.45 HP - 12,000 RPM) each motor. -- Top & Bottom profile scrapers for up to 3mm thick PVC banding, vertical & horizontal tracing shoes, SIKO digital readouts for easy setup. -- Top & Bottom Glue scraping Unit. -- Patented IMA Superfinishing unit with spheres to finish and reactivate the color on thick PVC/ABS banding. -- Operator Control Interface: BECKHOFF Control. -- Sound-proof enclosure cabinet over all the working units with interior lights.

Details

Year:1995

Make:I M A

Model:NOVIMAT 12/275 ST

Stock Number:EO-012196

Location:MIDWEST,


SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Karl Balg

800-374-5009 ext:355

View Seller's Entire Inventory and Information