Biomass Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 30 of 30
597 Results Found
Sort By 
Recently Added Items
1998 Morbark 22rxl
$66,000
1998 Morbark 22rxl
2015 Morbark 23NCL
$225,000
2015 Morbark 23NCL
2012 Weima TH 1500 Briquette Press
Call For Price
2012 Weima TH 1500 Briquette Press
1992 Granutech-Saturn BIG MAC
Call For Price
1992 Granutech-Saturn BIG MAC
Call for Price

WEIMA TH 714 Briquette Press (Cylindrical). -- Produces 2-3/4" (70 mm) dia. x 4" (100 mm) long compacted logs. -- Specifications: Approx. 1.4 m³ vertical hopper, 18 HP (13.5 kW) motor; vertical hydraulic ram compacts the material in the extrusion chamber to produce uniform material, extrusion chamber is continually filled via rotary screw type auger. -- Approx. hourly output between 240 - 280 Lbs/Hr ("quoted output is an average and can be influenced by density, material size, screen size, feeding form, and other factors"). -- Equipped with: Centralized control panel for easy operation, MITSUBISHI Logic control & solid German engineering. -- Complete with: Auto on/off switch, auto length adjustment, & oil level sensor. -- Optional:: Hydraulic oil heater, hydraulic oil cooler, transfer piping and customization to customer material handling.

Jim Reedy
800-374-5009 ext:455
Call

$ 72,500

WEIMA WLK 15 Vertical Hopper-fed Low Noise Grinder Specifications: -- Single shaft Shredder/Grinder, 59" x 59" rear-flared hopper opening; 3 cu. yds. cap.; 368 mm (14.5") rotor dia.; 150 HP motor; hydraulic ram with 4-sided serrated ram. -- Equipped with: -- Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters; reduce friction, and dedicate more horsepower to grinding. -- (82) Welded knives, (4) broaching cutters & (4) counter-knives, recessed concave cutters with low clearance over the rotor to extend cutter life, protect the bolts, and reduce machine wear. -- Features: -- Drop out discharge, hydraulically actuated lift up door for easy purge cleaning; extended screen basket; cut-out for conveyor (not included). -- Hydraulic serrated ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system, Hydraulic clutch enables motor to start with the hopper full. -- Complete with: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components. -- Recommended for plastic, paper or wood applications.

Jim Reedy
800-374-5009 ext:455
Call

$ 99,500

WEIMA TH 614 HD Metal Briquette Press w/WEIMA ZMK 30 4-Shaft Shredder & ConveyorProduces 60 mm dia. x 4" (100 mm) long compacted logs; approx. 1 cu. m square vertical hopper.Specifications: -- 18 HP motor; vertical hydraulic ram compacts the material in the extrusion chamber to produce uniform material, extrusion chamber is continually filled via rotary screw type auger. -- Volume reduction from chip/dust to block up to 10:1 ratio; approx. -- Centralized control panel for easy operation. Auger, oil cooler, auto. on/off switch, oil level sensor, auto length adjuster. -- Includes: -- Metal package for TH 614 HD; catch pan with level switch; fluid pump with 10' of hose; tool steel pressing rod, wear sleeves and clamp; discharge pipe for conveying 60 mm diameter briquettes (3 sections: 1 x 45°; 1 x 90° & 1 x straight). WEIMA ZMK 30 4-Shaft Shredder 4-Shaft Shredder with electrical cabinet & controls.Specifications: -- Dual drive motors - (2) 11 kW (15 HP) Drive motors; hopper opening measures 39.4" x 55.1" (1,000 x 1,400 mm); cutting chamber opening of 18.2"x 27.6" (462 x 700 mm); rotor length of 18.2" (462 mm); Rotor speed 25 RPM; cutting disc 11" (280 mm) diameter.JORGENSEN Transfer Conveyor18" Wide steel belt; collection hopper for under ZMK 30; coolant pump and float switch for fluid transfer.

Jim Reedy
800-374-5009 ext:455
Call

$ 16,000

WEIMA WL-4S Vertical Hopper Fed Low Noise Grinder, with 25,244 Hrs. (As of 10/31/23), with New Bearings & Belts in 2022!Specifications: -- 23-1/2" x 31-1/2" (600 - 800 mm) Hopper opening at top, 0.8 cu. yds. (0.6 cu. m) cap. -- 22 kW (30 HP) Motor with Hydraulic clutch, 14-1/2" Dia. Rotor grinds at 90 RPM. -- Patented "V-Rotor" design utilizes V-groove rotor closely matched to grooves in counter-knife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding.Equipped with: -- Spiral cutterhead, Welded knife holders, Approx. 14 - 15 Recessed concave cutters with low clearance over rotor to extend cutter life, protect bolts, and reduce machine wear. -- 3/4" Screen 8" dia. chip collection outlet (1,900 CFM required). -- Hydraulic ram, with 0.75 kW (1 HP) Hydraulic unit, Optimizes feed pressure by monitoring rotor motor amperage, lateral force on ram is minimized by unique "U-Joint" mounting system. Features: -- Heavy-duty structural steel frame, Welded construction, Integrated "plug-and-play" electrical control system with UL-approved components. -- Capable of processing 600 - 1,500 Lbs./Hr. depending on material and screen size.

Jim Reedy
800-374-5009 ext:455
Call

Call for Price

Weima TH1500 Briquette Press

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 67,500

WSM - 2852BH, ...Heavy Duty Hammermill/Shredder. -- 200 HP - 1,165 RPM Motor -- Infeed opening size: 52" L x 28" W -- Infeed with: Feed roll, 1-1/2" teeth with 6" spacing. -- (2) Types of Hammers: One a rounded style with hard-faced tips.Machine is part of a Pallet Recycling Plant and includes: -- Pallet Feeder -- Dual Chain Conveyor. -- Vibratory Feeder. -- Inclined Oscillating Table.

Bill Christoffersen
800-374-5009 ext:365
Call

Call for Price

Wood Pellet Manufacturing Plant Equipment;Complete with the following features: -- Design capacity 15 tons per hour. -- (1) Pellet Mill (Pellet Press) – custom built in USA and was producing at a rate of 4½ tons per hour. Comes complete with spare parts. -- WEST SALEM Model 4-4-60S Hammer Mill. -- Bulk storage. -- Conveyors to bagging system. -- Blowers Cyclones & Piping.NOTES: &#9679 Plant was planned for several pellet mills but was shut down due to lack of sales. &#9679 Operated only 3-4 years but has been down for a few years now. &#9679 All equipment remains installed. &#9679 Wood supply was from several sources: processing plants by-product, shavings from planer mills, finger jointing plant, and ground trim blocks. &#9679 No Dryer - Owner using it. &#9679 More details on request. &#9679 Professional rigging is available.

EX-FACTORY INC.
704-841-2001
Call

$ 250,000

MLS Number 12321010 WEST SALEM WSM5472 Horizontal Grinder -60” Millpower Shaker conveyor/finger screen – deck removed, used to meter flow of material fed by operator and reduce bed depth to make cross belt and head pulley magnets most efficient. -60” Eriez cross belt electro magnet. -Eriez 10K42 kW Silicon Rectifier incorporating: To convert 480 volt, 60 Hz, 3 phase AC to230 volt DC 10,000 watts output Normal convection cooled, full wave bridge circuit Fused AC switch Nema 3r Enclosure -Eries beefy magnet stand to support magnet and chain fall. -60” x 28’6” Slider Bed (Heavy Duty Feeder Type Conveyor) with 8’ section of stainless steel non-magnetic for Eriez cross belt magnet to perform at peak -20”x60” Dodge magnetic head pulley – installed to double up on magnets on conveyor, prior to material entering WSM grinder drag chain feed. Downstream from this is the WSM 5472bh Titan horizontal grinder. Schematics and wiring diagram can be supplied as well. WSM also supplied the chip discharge conveyor and magnetic head pulley and electrical panel with touch screen (by Emerson). Price includes dismantling and loading on buyer's truck. Manuals available for components.

Mike Stuck
828-773-2204
Call

$ 79,900

WILLIAMS - 60KS, ...Hammermill Crusher -- 200 HP Motor. -- Mill RPM 1,000. -- Feed Opening: 62" x 24". -- Ridge Arm Construction. -- Manual Available. -- Loaded onto your Truck.

Katie Lechelt
800-374-5009 ext:452
Call

$ 33,500

WILLIAMS - Hammer Mill: Half-round Type ConfigurationFeatures: -- 220 HP Main Drive Motor with Belt Drive; complete with Guard. -- 26” x 12” Input Opening. -- Powered Input Pull Rolls -- 4” Main Shaft with Swing Hammers, approx. 3/8” thickness -- Ratchet Lift Access Lid. -- Mounted on Steel Support Structure with Access Platform and Ladder -- Pneumatic Bottom Discharge with built-in Viewing Window in Ducting below the Hammermill (no fan included) -- Electrical Cabinet with Motor Starters -- NOTES: This machine was last utilized to break up virgin dried pulp for further processing. Already been removed from service – ready to load.

Bill Christoffersen
800-374-5009 ext:365
Call

Call for Price

Williams Hog S/N 14482 150HP Electric Motor

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

SALE PENDING

2005 WOODSMAN 440 TREE CHIPPER 2,743 HOURS CAT ENGINE GOOD FEED CHAIN GOOD DRUM REMOTE CONTROL VERY GOOD CONDITION FINANCING AVAILABLE

 Dover, NH
Granite Heavy Equipment and Finance
603-953-5983
Call

Call for Price

Woodsman 790 Grinder Power it how ever you want Was Running off a Diesel Power Unit.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

(3)Yulong XGJ 560 Pellet Mills Available - 125HP Motor.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

1994 Zeno ZTLL 1400 x 1600 Slow Speed Low Noise Grinder 55HP 480V & Hood

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

MODEL ZTLP 1800 X 1600 Zeno Low Noise Single Shaft Shredder/Chipper Specifications: --Model ZTLP 1800 X 1600 -- Feed opening 70’’ (1800mm) wide x approximately 62’’ (1600mm) long. --24’’ Diameter x 70’’ long single rotor with bolt-on blades. --Hydraulic pusher ram feed. --Shredder driven by a 105 kW (140 hp) --3/60/460 volt --1780 rpm motor --No Control Panel --New in 2005

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

Recently removed from service Available immediately

Carolina Machinery Sales, Inc
704-288-1904
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved