Woodworking Equipment For Sale

SCM Sandy 10 -RCS-110 Wide Belt Sander (2) Heads43" Width cap. Drum, Combination HeadHead Configuration:1st. Head: 7" diameter corrugated metal roller for calibration 35 HP ( Drives both Heads )2nd Head: Combination head with 7" dia. contact roller (spiral grooved rubber covered); air/jump finishing platen controlled with timers to eliminate any rounding on leading & trailing edges of the panel, 2" wide platen.Specifications --103" long x 43" wide Abrasive belts --Air tracking, floating & rigid bed for sanding of veneers & solid panels; infeed & outfeed spring loaded holddown rolls -- Minimum workpiece length 16" --Thickness capacity 6.25". --Separate 2.5 H.P. variable speed feed motor delivering feed speeds from 15 to 70 FPMNote: The seller has 20 boxes of various sandpaper belts (80 – 150 grit) that will be included.

SCM SANDYA 15S (3) Head Wide Belt Sander42" Width cap, Drum, Drum, Combination HeadHead Configuration:1st Head: Steel contact roll, 7" dia., 35 HP motor;2nd Head: Rubber-covered contact roll, 24 HP motor3rd head: Combination head, rubber-covered contact roll (45 Shore) and 3" wide finishing platen, 17.4 HP motor.Specifications: -- 43" x 103" Abrasive belts -- Electronic tracking & pneumatic belt tensioning, abrasive belt grit compensation. -- Conveyor belt feed with dual feed speed, 4 HP motor -- Automatic part thickness adjustment -- Motorized thickness opening via (4) precision conveyor bed jacksEquipped With & Features: -- LED readout, 0" - 6-1/4" opening. -- Infeed & outfeed spring loaded rubber covered hold-down rollers -- Motor load meters -- Infeed and outfeed roller conveyor extensions.

SCMI Olimpic K201 Edgebander

Belt size 43” x 85” (2) six inch dust ports 1st head 24 HP 230 2nd head 18 HP 230 Fiest head contact drum Second head combination with finish platen Feed rate 3 to 68 feet per minute Weight 4550 lbs 230 volt 3-phase

SCMI M3 Rip Saw Still under power for inspection

SCMI Concept NT Double End Tenoner Specifications coming.

Dip Chain Multi Saw Believed to be a SCMI 2 extra arbors Extra blades

Working Areas: X-Y Axes Dimensions (Depending on Machine Configuration) (Mm): 5510×1320 Axes: Vectorial Speed X-y Axes M/min: 56 (Prospace), 78 (Prospeed) Z Axis Panel Passage mm: 180 Routing Unit: Motor Power (Max.) Kw (Hp): 15 (20,5) Rotation Speed (Max.) Rpm: 24000 Available Tools on Tool Changer (Max.) Places: 24 Spindle: HSK63 Machine has a drill block that was never used. Still under power but ready to move.

Motor Horsepower 12 HP Working Width 630mm (24 3/4”) Working Height 3 – 300mm (1/8” – 11 3/4”) Max. Depth of Cut 8mm (5/16") Minimum Length of Stock 260mm (10 1/4”) Cutter Head Diameter 120mm (4 3/4") RPM 4500 No. of knives 105 Knife Dimensions 15mm x 15mm x 2.5mm Table Size 630mm x 1000mm (24.75” x 39.4”) Feed Speeds (Variable) 4 - 20 m/min (13 - 65 FPM) Infeed Roller Steel sectional, power driven Outfeed Roller (x 2) Rubber, power driven Dust Hood Diameter 150mm Noise Level (dB) 70 Overall Dimensions (L,W,H) 51" x 40" x 45” Shipping Weight 1230kg (2,710 lbs) Net Weight 1155 kg (2,550 lbs) Electrical Requirements 45 amps @ 230 volts Dust Extraction 980 CFM

SCMI Gang Rip Saw S/N B.540480

2014 SCMI Olimpic K600 Edgebander Premill Corner Round Still used daily!

This machine needs some cleaning up. It is still used periodically in the current shop.

SCMI Superset XL Moulder 480 V/3 PH

SCMI 6-Head Moulder - Ready to load.

SCMI Sandya Uno 37" Wide Belt Sander

SCMI S630K Planer 10 HP Motor Straight Knives

SCM F520 Nova Jointer with Tersa cutter heads 20" Machine

SCMI Sliding Table Saw

Mini Max Sander 24” width Single head 240 volt 3-phase