Stationary Wood Chippers For Sale
Category
Wood Chippers - Stationary
78 Results Found
Call for Price
Very clean Newman G-200 Knife grinder. In good working order, grinds 17" on the inside and 20" on the outside.
Call for Price
Call for Price
Nice Newman G-280 that has been refreshed. Has extra cylinder wheels that come with it.
Call for Price
Complete Chip Mill that is ready to be moved System includes: - Log Deck - Log Singulator - Control Room - Nicholson A5 Debarker - Peeled Log Outfeed Bin - Reclaim Log Infeed Deck - Bark conveyor and stacker - Bark Shredder - Progress 84" 6 Knife Chipper w/ 600 HP Motor - Progress Chip Screen: 7'x14' - Chip Blower and Truck Loading Conveyor - MCC Center
Call for Price
Nicholson Flat Drum Chipper 9'5' x 55" Includes: Trailer, AC power, belt conveyor, switch gear option. System chipped just over 120 truckloads
PHL chipper/ shaker, 6 knives 3 are blocked, includes shaker screen and chip blower, good working condition
$ 28,000
75" Precision 4 knife chipper with side discharge. Progress 7 x 7 Chip Shaker. Will not separate.
Precision Chipper 58" 3 knives. 24' flat belt conveyor for intake. Top discharge with elbow with pipe. No power. Used to make mulch and chips.
58” Precision - Husky Chipper - 58” RH Chipper - Chipper Size: 58-15 - Serial #: C2555 (built in 1993) - QTY 3- new sets of chipper knives (19.625” x 4” x 0.375”) - QTY 6- used sets of chipper knives (19.625” x 4” x 0.375”) - QTY 1- 150HP Motor (old style) HP: 150 RPM: 1780 FRAME: 445T HERTZ: 60 PHASE 3 - SN: U1950114132 - Spare Parts: (6) Fan Blades or “Paddles” (2) Horizontal anvils + (1) Vertical anvil (1 ea. per set) (11) Counter knives (6 per set) Feed Plate Background: - Incredibly reliable machine for 30 years (installed in July 1993) - Rebuilt most recently in April 2023 –including belly plate - Only missing component in “complete rebuilt set” is the belly plate - Previously handled waste from 5MMBF/year post mill operation for 30 years without issues, rebuilt as needed - We needed to upgrade to a larger chipper once we started adding an additional 5MMBF/year scragg mill operation and the additional sideboard waste - Spare / used parts value ~ $17,100
Call for Price
Precision 58" Chip Pac 6-Knives 72" Cyclone H-Type blower with dual load out chutes 6'x6' Screen 25' Vibrating Infeed with transition chute to chipper with fiberglass section and MDI metal detector
Call for Price
The seller has confirmed that this 96" Precision chipper is in good working/running condition and is ready to load. This was not heavily run. This came out of a chip plant in WA. Model 96.27 - Horizontal feed - Side discharge - 4-Knife whole log chipper - 8" thick chipper dissc - Built in disc brake - Extended front shaft for hydraulic starter - Hydraulic starting motor - Side discharge pipe with motorized outlet adjustment - 27" maximum log diameter - Many spare parts and knives included - Average production rate: 125 tons per hour - No hydraulic pump - No motor - an 800HP one can be added for additional cost though... The photo's show the optional extended shaft and hydraulic starting motor which is a special feature....
Call for Price
Complete chip plant includes: - The infeed is 12’ above ground level. They were feeding it one log at a time with a shovel. - There is a single chain 12” wide leading to the debarker. - The debarker is a Salem 20” ring debarker with mcdiarmond controls. - From the debarker it goes through I think is a metal detector. It’s is enclosed, 8’ long with a belt conveyor. - 75’ of 3-strand chain that reduces to 2-strand chain for 35’ then goes to another 2-strand chain for 12’ then goes into the chipper. - The chipper is a Precision with 2- 400 hp high efficiency 3 phase motors. - From the chipper the chips drop onto a 42”x50’ inclined belt that leads to the 2 deck screen. The screen is 92”x20’ - The waste goes on a 9”x20’ incline belt and dropped into a truck. - The chips go out on a 3-strand 100’ conveyor (strands are 14” wide) to a radial stacker for loading trucks. The stacker belt is 42”x65’ - Chips can be redirected to blower unit system that will transport them to a rail siding to so they can be loaded into a rail area. It starts out with 75’ of 12” pipe running on the ground. Then it sweeps straight up to a height of about 24’ and goes 150’ to a siding across the county road. The chip loading facility is intact. - The hog is located back by where the logs are loaded onto the chain going to debarker. Here’s a list of the conveyors going back to the Kockums hog. It has a 24”x36” opening at the top. - Conveyors: 12”x100’, 12”x 25’, 12”x60’. All of these conveyors are 1 strand steel.