Mobile Wood Chippers For Sale

2007 Morbark Typhoon 20 Whole Tree Chipper, Equipped with Loader and Operator Platform, John Deere 325 HP Turbo Diesel Engine, New Completely Rebuilt Engine with 20 Hours, 6,000 Frame Hours, Hydraulic Tongue Jack , Autofeed System, No Winch . Great Running Machine... HEIGHT 11' WIDTH 8' LENGTH 26'8" GROSS WEIGHT 18,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Morbark Hurricane 18 with 4,942 hours. 18" chipping capacity, Caterpillar 213 pre emission diesel, 1,593 hours on newer motor. Machine has full hydraulics- 360' rotation chute, (3) jacks and 5000 LB winch. New: blades , blade bolts , blade pockets, cutter bar, drum bearings, blade belts , feeder wheel chain, 150' winch line with dog bone, batteries, leaf springs, fluids, filters, paint, waiting on sticker kit from Morbark. Ready for work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Morbark Inc model 23 chipper with mor-lift 500 grapple, Caterpillar 3412 engine, 3195 hours before clock was changed and now showing 121 Hours on the clock. Computer showed 3320 at service last week, Set up for 7/8 inch chip size, Tilt cab, Hydraulic moving/folding chip chute, All the hydraulic functions are working, A/C/heat unit in cab was not functioning when checked, On board mounted air compressor, It’s a good solid machine ready to work, Contact us to set up a time to see it!

1993 MORBARK 30/36 TREE CHIPPER HOURS ARE UN-KNOWN 325 CAT ENGINE REPLACE IN 2009 NEW BRAKES AND TIRES ALL HOSES REPLACED RECENTLY VALVE BANKS REBUILT ON BOARD AIR COMPRESSOR NEW BELTS AND CHAINS REW RADIATOR JOYSTICK CONTROL WORKS DAILY FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2009 Morbark 40/36 A3 Drum Chipper with 4,000 hours on a Cat C15 630 HP engine, 4,500 hours on frame. Updated Anvil, newer Infeed chain and paint. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

MORBARK MODEL 20 TRACK CHIPPER 5,888 HOURS CATERPILLAR 425 ENGINE RECENT ENGINE REBUILD RECENT CLUTCH PLATE RECENT BEARINGS GOOD UNDERCARRIAGE GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

1983 MORBARK RXL 27 TOTAL CHIP HARVESTOR 5,110 HOURS 600 CUMMINS UPDATED SPREAD BEARINGS RUNS GREAT WORK READY FINANCING AVAILABLE WITH NO MONEY DOWN GRANITEHE.COM

2014 Morbark Flail 223 Debarker, has a Caterpillar 9.3 that's been deleted. It has 9,249 frame hours and 600 on the engine rebuild. New Hydraulic Clutch Last Year, New Rear Feed Wheels 23" Capacity Ready for the Woods. Length (transport) 33'5" Height (transport) 9'11" Width 9'10" Weight 46,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Morbark 1821 Tracked Chipper, Cat 173HP Diesel, Winch, Remote. Excellent Running Machine.

Cat 3412E 860hp Engine status report shows 43% average load factor, 3317 idle hours. 8899 hours on original engine. Completely serviced and runs properly. Morlift 500 loader with tight grapple, A/C cab all nicely fitted. Auxiliary air compressor Michigan model 40 knife grinder Extra knives Very sound, tidy chipper throughout. Call for complete condition report.

Microchipper, recently installed all new pocket liners and hardware. Fully functional, with remote. Ready to go. CAT C15 540HP Advantage 3 Drum- 12 knife Twin Disc Clutch Air Compressor Light Package

2016 Morbark Model 23NCL with Separate Flail 223 Debarker, Caterpillar C18 Engine with 8,200 Hours, New Clutch 3 months ago, New Water Pump, Caterpillar 9.3 on Flail with 9,000 Hours, New Bottom Flail, New Head and Injectors, Bark Pusher, New Pads, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Morbark 30/36 whole tree chipper -1884 hours -Cat Engine -Pintle hitch towed -Extra sets of knives and parts -Factory Engine warranty remaining PRICE REDUCED!!!!!!!

1994 Morbark 23WCL 23" disk chipper With loader Good condition Includes: extra (new and used) knives, counter knives, & top plate

-400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back

2008 MORBARK 30/36 TREE CHIPPER 5.100 HOURS GOOD DRUM JOHN DEERE ENGINE 500 HP GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

400HP, 25" wide drum, original hours

Good running machine Disc hardware recently installed Remote

1998 Morbark 22RXL Disc Chipper -Unkown hours -Cummins Recon engine(600hp) -Needs new inside hood but has replacement for it -Tires are good -No lights On Job Chipping now videos upon request!!!!!! Available as a package with two chip trailers 42x96 rear load CALL FOR PRICE!!!!!!

600HP, Advantage 3 drum, Wireless Remote, compressor, rebuilt turbo, serviced, nice machine for age