Mobile Wood Chippers For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 3 of 6
108 Results Found
Sort By 
Recently Added Items
1998 Morbark 22rxl
$66,000
1998 Morbark 22rxl
2015 Morbark 23NCL
$225,000
2015 Morbark 23NCL
2017 Bandit 3090T
$400,000
2017 Bandit 3090T
2019 Morbark 40/36
$350,000
2019 Morbark 40/36
$ 129,000

2011 BANDIT 2290 TREE CHIPPER 4,500-5,000 HOURS C-13 440 HP ENGINE GOOD FEED CHAIN HYD CHUTE GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

 Dover, NH
Granite Heavy Equipment and Finance
603-953-5983
Call

$ 17,900

2005 Bandit 150 Chipper 7300 hours Deutz intercooled engine No blow by New teeth New drum bearings New springs Good tires Work ready

Mitch Stevens
828-773-6986
Call

Call for Price

2008 Bandit 1590XP Drum Chipper with140hp John Deere Engine, winch, auto feed, lift cylinder, Ex municipal machine in very good shape. Length: 12' 6" Width: 8' 6" Height: 9' 3" Weight: 12,500 pounds (approximate) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Atlanta, GA
NEF Equipment
855-251-2648
Call

Call for Price

2019 Bandit 18XP with 165hp V8 GM gas engine with 2200hrs, Winch and loaded with extras, Lift Cylinder, Hand Crank Turn and Height Adjustable Discharge. Length: 20’ 2” Width: 7’ 4” Height: 8’ 8” Weight: 9,700 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Atlanta, GA
NEF Equipment
855-251-2648
Call

Call for Price

2004 Brush Bandit 254XP Chipper, Cummins 130 HP Turbo Diesel, 1,600 Hours, Twin Disc Clutch, Winch, Hand Crank Height Chute, Telescoping Tongue Cylinder with a 2-1/2" Pintle Hitch, Hand crank swivel chute, Auto-feed System, Aluminum Rims. Weight, 7,800 lbs. Width, 89" Height, 100" Length, 188" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Blakeslee, PA
NEF Equipment
855-251-2648
Call

$ 249,900

2006 Bandit 3680 Beast Recycler, C15 cat 545 HP Non-emissions engine with 9284 hours Radio Remote, Magnetic Head Pulley, 5th Wheel, Bandit rebuilt the mill area in 2019. Weight. 62500 lbs. Width. 130 in. Height. 162 in. Length. 528 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Rockville, MD
NEF Equipment
855-251-2648
Call

$ 13,500

2015 Bandit 200UC Chipper -751 hours -74 hp kohler diesel -12 inch Ready to work

Josh Digirolamo
828-302-7264
Call

Call for Price

In Stock Bandit 2590 Tracked Whole Tree Chipper, 755HP Cat C18 with Reversing Fan, Cat 320 Undercarriage with Double Grouser Pads, Air Compressor Assy. Call Today for Rental Or Sales.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

$ 65,000

2022 Carlton 2015 Tree Chipper, Deere 140HP Diesel, Hydraulic Winch.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

$ 28,500

2011 Carlton 2012 12” Disc Chipper, 125hp John Deere Diesel with 2,894 original hours, Auto Feed, Lift Cylinder, Ready to chip... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Rockville, MD
NEF Equipment
855-251-2648
Call

Call for Price

FARMI CH 100 F is designed as a robust and inexpensive disc chipper for landscaping to chip branches and small trees up to a diameter of 100 mm. The FARMI CH 100 F can be mounted onto a small tractor giving a compact chipping machine in gardens, parks, yards and road sides. Two knives and an anvil take care of chipping and feeding. CH 100 F chipper is available as a tractor PTO versions or as a hydraulic driven option.

 Spencer, NY
Northeast Implement
607-589-6160
Call

$ 28,000

2016 Morbark Beever M12D 1,237 Hours Auto Feed 89hp Power Solutions International (PSI) 3.0L gas motor TorqMax Feed Wheel Compression System Hydraulic Lift Yoke Cylinder 53" Folding Feed Table 18" x 12" Throat Capacity Fully serviced with new fluids, filters, tires, wheels, knives, battery and rain cap 360 Degree Rotating Adjustable Chute LED lights

Mitch Stevens
828-773-6986
Call

$ 79,000

MORBARK 27RXL WHOLE TREE CHIPPER BAD MOTOR V-12 CAT LOTS OF NEW PARTS DISC SHAFT BEARINGS DECK CHAIN AND SPROCKETS JUST WENT THRU CHIPPER AND MOTOR THREW A ROD LOTS OF NEW PARTS JUST NEEDS MOTOR

 Manton, MI
Lutke Equipment LLC
231-824-9505
Call

$ 139,000

2002 MORBARK 30RXL WHOLE TREE CHIPPER ENCLOSED CAB WITH HEAT AND AIR CAT V-12 MORLIFT 1000 BOOM READY TO GO

 Manton, MI
Lutke Equipment LLC
231-824-9505
Call

$ 47,900

1992 Morbark Model 27 Whole Tree Chipper Cat V12 800 HP Engine Currently in production PRICE REDUCED

Mitch Stevens
828-773-6986
Call

Call for Price

1996 Morbark Model 20 Whole Tree Chipper ,Caterpillar 425 HP Engine, Enclosed Cab with Heat and AC, Needs a Condenser for the AC, Machine has Separator ,Ready for the Woods... Overall Length 21’6” Overall Width 8’0” Overall Height 13’6” Weight 10,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Albany, NY
NEF Equipment
855-251-2648
Call

Call for Price

1994 Morbark 23 WCL Whole Tree Chipper Engine is a 3412, Seperator, Enclosed Fold Down Cab with Heat, 6 Sets of Knives and New Anvil, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Albany, NY
NEF Equipment
855-251-2648
Call

$ 65,500

2008 MORBARK TYPHOON 20 CHIPPER -400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back

Keith Comeau
704-929-9122
Call

$ 250,000

1050 HP C27 engine, Morlift 500, 3 flail with bark conveyor. Boom cylinder being repacked, one owner, original engine

Forestry First
855-588-7871 ext:1
Call

Call for Price

2006 Morbark Hurricane 18 with 4,942 hours. 18" chipping capacity, Caterpillar 213 pre emission diesel, 1,593 hours on newer motor. Machine has full hydraulics- 360' rotation chute, (3) jacks and 5000 LB winch. New: blades , blade bolts , blade pockets, cutter bar, drum bearings, blade belts , feeder wheel chain, 150' winch line with dog bone, batteries, leaf springs, fluids, filters, paint, waiting on sticker kit from Morbark. Ready for work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Blakeslee, PA
NEF Equipment
855-251-2648
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved