• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
4 Results Found for Moulder Viewing 1 - 4 of 4 results
RECENTLY ADDED
STANDARD LISTINGS
WEING U 23 E "STANDARD" Feed Through Moulder; 5-Heads, (B-R-L-T-B), working capacity 9-1/16" x 6" profiling.Head Sequence: Bottom 10 HP, right & left by 15 HP, top 20 HP and bottom 10 HP motor.Spindle dia.: 1-13/16" with cutterhead speed of 6,000 RPM; mechanical digital readouts on spindle adjustments for both axis, radial adjustment only on 1st bottom head. -- Motorized feed beam adjustment with independent adjustment of top heads, receding chip breakers on left and top heads. -- Tool cutting circles of 7-7/8", table plates adjustable to the cutting circle on vertical spindles with axial adjustment of 3-1/8" for multiple profiles.Feed motor: 7.5 HP, variable speed from 18 - 118 FPM, overhead feed wheels with pneumatic pressure; (2) powered rollers in machine table.Infeed: Straightening table 2 M (6-1/2') with adjustable fence & adjustable outfeed table; side pressure roller mounted to infeed table. -- Central lubrication, full sound/safety enclosure and manual bed lubrication pump.
Equipment Location:SOUTHEAST
Bob Dykstra
800-374-5009 ext:378
WEINIG - UNIMAT 23E/005, ...Moulder (Feed Through) - 6-Head (B-R-L-T-T-B), working capacity 9-1/16" x 6" profiling. -- Head sequence: Bottom 15 HP, right & left by 15 HP, top 20 HP, top 15 HP and bottom 20 HP motor. -- Spindles: 1 13/16" with cutterhead speed of 6,000 RPM. Mechanical digital readouts on spindle adjustments for both axis, radial adjustment only on 1st bottom head. Cutting circles left and last bottom 8-7/8", table plates adjustable to the cutting circle on vertical spindles with axial adjustment of 3-1/8" for multiple profilesNew Spindle bearings 2-6! -- Motorized feed beam adjustment with independent adjustment of top heads. Receding chip breakers on left and top heads. Mechanical digital readouts on chipbreakers and pressure elements. -- Feed motor of 7.5 HP variable speed from 18 - 118 FPM; overhead feed wheels with pneumatic pressure, (2) powered rollers in machine table. . -- Infeed: straightening table 1.2 M (4'0") with adjustable fence & adjustable outfeed table. Side pressure roller mounted to infeed table. -- Includes: Central lubrication, full sound/safety enclosure and manual bed lubrication pump. New Spindle bearings 2-6! -- NOTE: VFD as shown in the photos NOT included. Seller using for converting single phase to 3 phase on the moulder.
Equipment Location:MIDWEST
Bob Dykstra
800-374-5009 ext:378
WEING U 23 E Feed Through Moulder; 6-Heads, (B-R-L-T-T-B), working capacity 9-1/16" x 6" profiling. -- Head Sequence: Bottom 10 HP, right 10 HP, left 10 HP, top 20 HP, top 15 HP and bottom 15 HP motor. -- Spindles: Dia. 1-13/16" with cutterhead speed of 6,000 RPM; mechanical digital readouts on spindle adjustments for both axis, radial adjustment only on 1st bottom head. Motorized feed beam adjustment with independent adjustment of top heads, receding chip breakers on left and top heads. Tool cutting circles of 9-7/8", table plates adjustable to the cutting circle on vertical spindles with axial adjustment of 3-1/8" for multiple profiles. -- Feed: Motor 10 HP variable speed Carden drive from 18 - 118 FPM, overhead feed wheels with pneumatic pressure; (2) powered rollers in machine table. -- Tables: Infeed straightening table is 2 M (6-1/2') with adjustable fence & adjustable outfeed table; side pressure roller mounted to infeed table. Central lubrication, full sound/safety enclosure and manual bed lubrication pump. Short stock attachment after right spindle. -- Note: This Moulder was running in production and removed from service from a furniture Mfg.
Equipment Location:SOUTHEAST
Bob Dykstra
800-374-5009 ext:378
WEING U 23 E Feed Through Moulder; 6-Heads, (B-R-L-T-T-B), working capacity 230 x 160 mm (9 1/16" x 6 3/4"). -- Head Sequence: Bottom 7 kW (10 HP), right & left 15 kW (20 HP), top 11 kW (15 HP), top 7.5 kW (10) HP and bottom 7.5 kW (10 HP) motor. -- Spindles: Dia. 38.1 mm (1 1/2") with cutterhead speed of 6,000 RPM; mechanical digital readouts on spindle adjustments for both axis, radial adjustment only on 1st bottom head. Motorized feed beam adjustment with independent adjustment of top heads, receding chip breakers on left and top heads. -- Variable feed speed from 6 .1 - 36 MPM (20 - 23.77 FPM), overhead feed wheels with pneumatic pressure; (2) powered rollers in machine table. -- Table: Infeed straightening table is 1828.8 mm (6' 6") with adjustable fence & adjustable outfeed table; side pressure roller mounted to infeed table. Central lubrication, full sound/safety enclosure and manual bed lubrication pump. Infeed fence with idle rollers for future attachment of hopper feeder. -- This machine is under power being sold from our client’s facility. We always recommend machine be inspected in person to verify condition. -- Note: When this moulder it was built the owner preferred the machine to be red so Weinig used Hydromat panels instead of the blue Unimat panels.
Equipment Location:SOUTHEAST
Bob Dykstra
800-374-5009 ext:378