BioMass Equipment For Sale

2011 Bandit Beast Model 3680, Caterpillar Model C-18 765 HP Turbo Diesel with Only 2,300 Original Hours , Magnetic Head Pulley on Discharge Conveyor, , Air Compressor, Wireless Remoter Control,and Tether Cord Control, Autofeed Reverse System, Tri-Axle Unit with Hydraulic Tongue Jack with Air Brakes... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Bandit 3680 Beast Recycler, C15 cat 545 HP Non-emissions engine with 9284 hours Radio Remote, Magnetic Head Pulley, 5th Wheel, Bandit rebuilt the mill area in 2019. Weight. 62500 lbs. Width. 130 in. Height. 162 in. Length. 528 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

In Stock 2021 Bandit 3680T Horizontal Grinder Tracked, Call Today for Sale Pricing or Rentals.

2020 Bandit 3680T BEAST Tracked Horizontal Grinder - 1416 Engine Hours - 900 Grinding Hours - Cat C27 w/ 875 HP - PT Fluid Clutch - Remote Control - Automatic Greaser - Automatic Chain Oiler - On-board air compressor - Adjustable Discharge - 36"" Capacity - 30 Tooth Cutter mill This machine was just ran through by the Quality Equipment & Parts Service Department. Bandit dealer of 10 Years. - Infeed Chain: New Headshaft and Tailshaft, new bearings, some new infeed slats - New teeth & rakers on cuttermill - New Screen & Gate - New Poly slide boards on Primary Discharge - New Anvil Bar - On-board air compressor serviced - New grease lines

1994 Brush Bandit Model 250 Brush Chipper, Equipped with a Cummins 4BTA3.9 Turbo Diesel Engine, Engine reading 2,000 Hours, Rockford Clutch, Machine recently serviced and has a new turbo. Ready for work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1995 BANDIT 280XP MOBILE CHIPPER 3,200 HOURS 8.1 JOHN DEERE 300 HP ENGINE 6 SETS OF KNIVES NEW FEED WHEEL MOTOR GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2012 Bandit 3090 Tree Chipper 24" Diameter Capacity 26" x 36" Opening Cummins 600 HP Only 700 Hrs New Drive New Pump New Hoses New Belly Plate New Auto Feed

2013 Bandit 3090 4,600 hours on the Cat C18 765 HP Engine, Tires are 11R x22.5 length of unit 39'7" width 9'9" Height 12'4" weight 54000 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 3090 BANDIT WHOLE TREE CHIPPER 1,445 TOTAL HOURS GOOD DRUM CAT C-18 ENGINE GOOD FEED CHAIN HYD SHUTE VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN NO PAYMENTS FOR 3 MONTHS WITH GOOD CREDIT GRANITEHE.COM

New In Stock Bandit 3090 Tracked Whole Tree Chipper.

2017 Bandit Model 3090 Track Whole Tree Chipper, Only 500 Original Hours, Volvo Turbo 800 HP Diesel Engine, 24" Whole Tree Chipper 26" x 36", 6 Knife Chipper drum, Opening, Air Compressor, Undercarriage is 99%, Radio Remote Control System, 7-1/2' Infeed Conveyor, Hydraulic Discharge Chute for Discharge Ready to Chip. Length: 33’ 6” Width: 11’2” Height: 12’ 3” Weight: 59,000-62,000 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

CAT (755HP) 37" DIAMETER X 36" WIDE DRUM WITH (6) KNIVES 30" DIAMETER X 36" WIDE TOP FEED WHEEL 10 5/8" DIAMETER X 36" WIDE BOTTOM FEED WHEEL STANDARD 7 ½" INFEED CONVEYOR FORESTRY STYLE DISCHARGE WITH HYDRAULIC SIDE/UP OR DOWN END DEFLECTOR AIR COMPRESSOR DOUBLE GROUSER TACK PADS 62,000 LBS

2017 Bandit 3090 Track Chipper -560 hours -800 hp -Like new Turn key chipper

New In Stock Bandit 60FM Mulching Heads. Call for Pricing.

2002 Bandit 5680 Beast Recycler, Cat 3412E 1050 hp, 80” Wide x 50” tall Mill opening, 3 speed Infeed 2 speed discharge, Radio remote, Magnetic head pulley, Pintal hitch, Extra screens. W 11’11” L 39’6” H 13’ 3” 92,000 lbs 20,000 lbs Tongue weight Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

BANDIT BRUSH BANDIT MODEL 95 CHIPPER Hydraulic Dump Bed Rebuilt Deutz 300 Hours Low Use Machine

Bandit 990TK Tracked 12" Chipper. Remote Control, Low 380 Hours. Chipper in excellent shape. Call today.

2006 Bandit 3680 Beast Recycler with a Cat C15.565 hp Engine with 4,800 hours. Radio Remote and Magnetic pully. Weight. 62500 lbs. Width. 130 in. Height. 162 in. Length. 528 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Bandit 3680T Wood Grinder -147 Hours -5 Year CAT Warranty -Excellent Condition - More photos and info coming.

2017 Bandit Beast 4680T -1800 hours -1050 hp Cat c27 -Spare New Screens -48 tooth mill -New overband magnet -Newer discharge belt