Veneer Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 2 of 2
31 Results Found
Sort By 
Recently Added Items
Diehl VS-81
Call For Price
Diehl VS-81
2005 Wemhoner Variopress Basic 1000 Plus
Call For Price
2005 Wemhoner Variopress Basic 1000 Plus
Call for Price

SAVI HFK - 400 Veneer Guillotine with 2nd Cut Feature.General Specs: -- 157" Width cap., 3-3/16" daylight opening, Motorized parallel fence adjustable from 1" to 30" (fence traverses with two lead screws), push-button operated with LED readout. -- Hydraulically operated knife stroke and hydraulic overhead pressure beam with self-contained hydraulic unit. -- Features: 2nd Cut feature with automatic reset, safety photoelectric barrier guard for knife and holddown beam, 2-hand operation of knife cycle. -- Includes: Fully refurbished.

Tony Cornacchione
800-374-5009 ext:432
Call

$ 17,500

SCHEER Veneer Panel Saw. -- General data: 122" Cutting length, 1-1/2" depth of cut, 3/4" - 42" max. back fence cap. with extension fingers, 5 HP arbor motor; saw carriage travels on hardened & ground ways. -- Equipped with: Manual operated saw carriage with hand crank Full-width rear fence with support, hand wheel operated rear fence with scale & arrow readout for positioning. -- Lockable fence at cutting position, fence line also pivots up to permit end trimming against the left guide fence. - Pneumatically controlled hold-down pressure beam. -- Complete with: Push button control and dust collection chute with channel in table base.

Tony Cornacchione
800-374-5009 ext:432
Call

Call for Price

Vac-U-Clamp FT800+ Thermofoil Press 52" x 105" Work area Dispenser Rack (3) Vac bags new in boxes still

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Vac-U-Clamp FT900 Thermafoil mPress Brand new - Seller never used it!

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

The Vantec 2800mm Spindleless Veneer Lathe is designed to process veneer for plywood production from both hard and soft logs. Its metal tempered grooved rollers and lathe knife inclination system work perfectly to make sure there will always be a precise contact area between the lathe knife and the log during the peeling process by eliminating vibration that could cause damage to the Veneer sheets. Vantec Spindleless lathe proves its efficiency by delivering consistent thickness variation and a impressive top linear speed of 180 m/ min throughout the peeling process for face or core veneers with smooth surfaces. - Log diameter up to 600 mm; - Max log length: 2750 mm; - Min log Length: 2300mm; (with stacker) - Min log length:1800mm (no stacker); - Veneer thickness: 1.0 to 4.0 mm; (Pine and eucalyptus); - Log core after peeling: 40 to 45mm; - Maximum linear speed 180 m/min; - Drive panel included; - Each motor is individually connected by a Variable Speed Drive for torque control in two points of traction on the rollers to pre- vent excessive load on tip ends; - Log Central aligner with maximum of 2200 mm of movement; - Pneumatic scriber Knives (02 fitted on the sides to cut in width and 01 in the Center to cut the length); - Width: 7640 mm; - Length: 3400 mm; - Height: 2550 mm; - Approximate weight: 14000 kg.

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

The Vantec Automatic Rotary clipper is designed to clip 2800 mm veneer sheets into specific sheet sizes as per the auto stacker preselection. It comes with electronic drive panel, automatic gauge system, positioning of clipper knife by Servomotor and encoder. It is de- signed to work with one tensioned clipper knife with gear motor. It also comes with a 2 HP motor on the output. The clipper knife is not included. - Veneer Thickness : 1 to 4 mm; - Max. Log: 2.750mm; - Minimum veneer width cut: 800 mm; - Max. Veneer length cut: 2700 mm; - Min. Veneer length cut: 700 mm; - Min. Venner rounding length: 150 mm; - Rotor gear motor: helical gears; - Clpper rollers power drive: 4 hp 6P; - Outlet conveyor Motor: 2hp 4P (input) 1 hp 8P (output); - Clipper Servomotor: 40 Nm (2x); - Width: 4800 mm; - Length: 6000 mm; - Height: 1700 mm; - Approximate weight: 7.000 kg

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

The Vantec Veneer Auto Stacker, ELV 1.82B is a Vacuum stacker for 2800 mm Veneer lathe. It is fitted with double stacking system (04 bins), with four veneer transport lines and four 5hp exhausters. with of two stoppers and eight ejecting arms. With drive Panel, VSD for exhaust fans and hydraulics lifting tables. Min veneer sheet length sheet: 2300 mm; • Max veneer sheet length sheet: 2700 mm (or Two sheets of 1350mm); • Min veneer sheet width: 800 mm; • Max veneer sheet width: 1500 mm; • Max height of stacks: 1000 mm; • Exhaust motor: 10 hp 4P (8x); • Inlet conveyor motor: 2hp 8P; • Transport conveyor motor: 6hp 4P; • Hydraulic pump motor: 5hp 4P (3x);

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Model ODW Pressing area 5’ x 8’ electric to hot oil heat 2 trays for continuous production Siemens control

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Wemhoner Variopress

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 119,000

WEMHONER Hot Oil Feed Thru Press - 7’ x 12’ Platen, 7.5’ x 13’ motorized feed belt - 340 Ton pressure, 8 cylinders, 6” opening - 12’ gravity outfeed conveyor - Includes natural gas boiler for hot oil. - Machine is no longer in service and disassembled. - $119,000.00

Sawmill Exchange
713-729-6455
Call

Call for Price

Wemhoner Variopress Basic 1000 Plus Model KT-MB-28/MB/15-240 Single Daylight Upstroke Hydraulic Press Max. Opening 2,540mm X 1250mm ( 100” X 49” ) 2 Trays Pin System 3D Application Foil Types PVC, PET, PP,ABS, Veneer And HPL Total Press Capacity 240 Tons Top/Bottom Heated Platens Working Height Approx. 900 mm (35.4”) Daylight Opening 150mm (5.9”) Upper Platen Heated by Thermal Oil Circulation 6 Cyclinder 125mm ( 4.9”) Diameter Total Press Pressure 2,400 KN Two Tray System with Pin System Tables arranged in over-under Configuration with Scissor Lift entering and exiting press on the same End Vacuum Pump and Vacuum Tank Foil Roll Storage Carousel ( Paternoster) for Vinyl Rolls Programmable Logic Controller PLC Model Siemens Simatic S7 Setting Parameters and operation of Pin System Year 2005 AS NEW CONDITION 460 volt 3 phase

Carolina Machinery Sales, Inc
704-288-1904
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved