• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
6 Results Found for Hogs and Wood Grinders Viewing 1 - 6 of 6 results
RECENTLY ADDED
STANDARD LISTINGS
VECOPLAN VH-18 Horizontal Wood Waste Grinder w/16' Vibratory Infeed Conveyor18" Wide x 5" high infeed opening, 60 HP rotor motor with power belt drive.Specifications: -- 15" Dia. rotor with (24) 4-way indexable, replaceable cutter knives, 1-piece counter bed knife, rotor/cutterhead grinding speed of 350 - 400 RPM. -- Top & bottom infeed rollers, Heavy Duty Industrial Grade construction with stress-relieved shell & frame; Heavy Duty outboard roller bearings. -- Up to 3,000 Lbs/Hr capacity, depending upon species and moisture content. -- Separate electrical control panel with programmable logic controls. Complete with: -- Interchangeable screen (3/4" installed), 12" dia. collection outlet and 16' long vibratory infeed conveyor. -- New counterknife anvil installed, all teeth and pockets checked. -- Two sides of teeth already used, 2 side are still good with a few exceptions where there are on 3rd edge.
Equipment Location:MID ATLANTIC
Jim Reedy
800-374-5009 ext:455
VECOPLAN VAZ 2000 M-N SP Wood Waste Grinder Heavy-duty, Single shaft, high output "TorsionPoint" cutting rotor. Low speed / High torque design with low RPM and noise. Heavy Spherical Roller Bearings in a stress-free frame that is robotically welded. Specifications: -- Machine In-feed Opening 78" x 78" -- Hopper Volume 11.9 cu/yds --Rotor Diameter 25" -- Number of Cutters 186, 4-way indexable -- Rotor Speed 30 - 200 RPM via Speed Master Drive -- Drive Motor 200 HP, Heavy-duty Direct Drive -- Precision Hydraulic Process Ram with 12.5 HP, 2-speed -- Includes: Bridge Breaker and Tramp Metal Options, PLC Control Panel and LED Monitoring -- Does not include complete discharge set-up.New machine, still in the crate!
Equipment Location:MIDWEST
Jim Reedy
800-374-5009 ext:455
VECOPLAN VAZ 2000 M-N SP Wood Waste Grinder Heavy-duty, Single shaft, high output "TorsionPoint" cutting rotor. Low speed / High torque design with low RPM and noise. Heavy Spherical Roller Bearings in a stress-free frame that is robotically welded. Specifications: -- Machine In-feed Opening 78" x 78" -- Hopper Volume 11.9 cu/yds --Rotor Diameter 25" -- Number of Cutters 186, 4-way indexable -- Rotor Speed 30 - 200 RPM via Speed Master Drive -- Drive Motor 200 HP, Heavy-duty Direct Drive -- Precision Hydraulic Process Ram with 12.5 HP, 2-speed -- Includes: Bridge Breaker and Tramp Metal Options, PLC Control Panel and LED Monitoring.
Equipment Location:MID ATLANTIC
Jim Reedy
800-374-5009 ext:455
VECOPLAN RG52-60-U Low Noise Grinder with Vertical Hopper FeedSpecifications: 52" x 58" opening, 60 HP rotor motor, power belt drive; 15" dia. high output "Torsion Point" cutting rotor with a (37) cutters. -- Rotor/cutterhead grinds at approximately 120 RPM fixed speed, average noise level 60 - 70 dbA; 4-way indexable, replaceable cutter knives. -- Features: Heavy Duty construction stress-relieved shell and frame, tramp metal protection, oversized gear box and Heavy Duty roller bearings. -- Complete with: Precision hydraulic "Process Ram" with a 10 HP 2-speed pump motor, fluid "TurboCoupling; monitored by programmable logic control feeding system; separate electrical control panel with push button controls. -- Includes: Inclined infeed conveyor; transformer to 600 volts. -- Teeth still have two turns left.
Equipment Location:EASTERN CDN
Jim Reedy
800-374-5009 ext:455
VECOPLAN VTH 35/8/2-VU Low Noise Grinder with Horizontal Feed, 14" wide x 3-1/2" high infeed opening, 40 HP rotor motor with power belt drive. -- Equipped with: 12" Dia. rotor with: (18) 4-Way indexable, replaceable cutter-knives, 1-piece counter bed knife, rotor/cutterhead grinding speed from 350 - 400 RPM. -- Features: Top & bottom infeed rollers, Heavy Duty Industrial Grade construction with stress-relieved shell & frame; Heavy Duty outboard roller earings; separate electrical control panel with programmable logic controls. -- Complete with: Interchangeable screen to produce desired particle size; 10" dia. collection outlet; 16' long infeed conveyor. -- Output cap. up to 1,500 Lbs/Hr, depending on screen size.
Equipment Location:SOUTHEAST
Jim Reedy
800-374-5009 ext:455
VECOPLAN - VAZ 800, ...Rotary Waste Grinder.Low Speed / High Torque Design and Low RPM / Low Noise Wood Waste Grinder in Heavy Duty Industrial Grade Construction.Specifications:• Machine Infeed Opening 32" x 42" • Hopper Volume 1.3 cu/yds • Rotor Length 32" • Rotor Diameter 10" • Number of Cutters 20 (40 mm x 40 mm)• 4-Way Indexable Cutting Inserts• Rotor Speed 100 RPM• Drive Motor 20 HP, Heavy Duty Direct Drive• Hydraulic Feed Ram 1.5 – 2 HP, 2-SpeedApplication Description:Type of material to be ground: MDF, Particleboard, Hardwoods Form of material to be ground: Scrap wood-waste Size of material to be ground: Varies Amount of material to be ground: 1,000 Lbs/HrDesired screen or particle size : 1" (larger & smaller available)Special Features & Benefits:• Oversized Gearbox and Large Infeed Hopper• Heavy Roller Bearings and Precision Hydraulic "ProcessRam"• High Output "TorsionPoint" Cutting Rotor • LED Monitoring •• Easy Accessibility and Tramp Metal Protection
Equipment Location:SOUTHEAST
Jim Reedy
800-374-5009 ext:455