Unique Shaper For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 1
11 Results Found
Sort By 
Recently Added Items
Weaver 2536
$2,175
Weaver 2536
2014 Voorwood
Call For Price
2014 Voorwood
Accu-Systems 35-2 shape/sand
Call For Price
Accu-Systems 35-2 shape/sand
STANDARD LISTINGS
2001 Unique 313  Shaper
$14,500

UNIQUE 313 Automatic Cope and Dowel Door Machine.Miters the end and drills for dowels of (2) cabinet door rails on each pass, automatic cycle for accurate & easy alignment of mitered corners.Equipped with: -- (2) 5 HP Dual-motor set for shaping w/1-1/4" spindles; (2) 1/3 HP dowel alignment drills. -- Automatic cycle with dowel hole boring for accurate alignment of mitered door corners in (15) Seconds per cycle, -- 1" Material thickness capacity, 4" max. material width, 5" max. cutter diameter. Features: -- (2) Pneumatic clamps holds material during operation for safe machining of parts, Adjustable stops for dowel drilling, Air over oil rod-less cylinder driven table. -- Staggered tables with angled fences allow (2) 1" thick parts to be machined simultaneously; digital position indicator. -- Dust Collection: (2) 5" Dust ports require approx. 1,000 CFM per spindle.

Torry Hiddema
800-374-5009 ext:371
Call

2019 Unique 250 GT2  Shaper
Call for Price

Machine to manufacture raised panel cabinet doors with (1) operator in (2) Min. -- Two Counter Rotating Variable Speed Direct Drive 10 HP Shaper Motors. -- 5" of vertical stack height, capable of stacking up to 3 cutters. -- Three (3) Position Turret for quick change over between profiles. -- The change from one cutter to another is achieved via a select switch for each operation. -- Two position pneumatic stop system positions automatically when cutters are selected -- Easy to read positioning scale allows for accurate centering of Arched panel and rail. -- Free floating table w/pneumatic holddown has 2-way linear movement for straight or cathedral top doors up to 55" long. -- Complete with (1) set of templates (998800). -- One set of tooling included. Set includes Unique 410 cope / rail cutters and 460 panel cutter with back cutter. -- Please call for other options.

Torry Hiddema
800-374-5009 ext:371
Call

Unique 250  Shaper
$7,750

UNIQUE 250 M Raised Panel Door Machine. General Specs: 7.5 HP belt driven spindle at 7,800 RPM, 1-1/4" x 5-3/4" stackable multi-cutter spindle to mill stile, rail, & raised panel profiles.Specifications: -- Spindle, stackable cutter spindle with push button indexing to significantly reduce setup time as each station is pre-set and adjustable. -- Moveable table w/pneumatic hold-down bar, 2-way linear bearing movement for straight or cathedral top doors up to 50" long stroke. -- Includes: MURPHY-RODGERS dust collector hood and cutter shields.Note: Current owner states "This machine has no mechanical nor electrical problems it is a great machine for the price and will get the job done and more"

Torry Hiddema
800-374-5009 ext:371
Call

1997 Unique 2700 CNC  Shaper
$32,500

UNIQUE 2700 CNC CNC Door ShaperCNC Controlled Machining Center for Raised Panel Doors.Equipped with: -- (1) CNC controlled 5" stackable vertical spindle (max. 4 tools per stack), 7.5 HP belt driven; max. clamping thickness 2-1/2" and 6" max. cutter head diameter. -- "X" Axis of spindle travels 81" on (2) THK rails with ball screw movement, "Y" axis with 5" travel on THK rails with 5" max. workpiece overhang, "Z" axis with 5" max. travel on THK rails.Features: -- Windows based PC computer with large touch screen menu for quick set-up, new door or custom door stiles can be programed in minutes, automatic operation from one style and size of door to the next, straight raised panels & widths of stile or rail and end tenoning work the same. -- Electronic sensors measure the length of the part to be cut allowing for various width panels or rails to be shaped consecutively, once a door is pre-programmed it can be re-called.Complete with: Electronic brake on spindles, (2) 5" dia. outlets for dust collection and UNIQUE's Windows based "Raised Panel Door" Software. .

Torry Hiddema
800-374-5009 ext:371
Call

2006 Unique 2700 CNC  Shaper
$19,500

UNIQUE 2700 CNC CNC Door ShaperCNC controlled maching center for Raised Panel Doors.Equipped with: -- (1) CNC controlled 5" stackable vertical spindle (max. 4 tools per stack), 7.5 HP belt driven; max. clamping thickness 2-1/2" and 6" max. cutter head diameter. -- "X" Axis of spindle travels 81" on (2) THK rails with ball screw movement, "Y" axis with 5" travel on THK rails with 5" max. workpiece overhang, "Z" axis with 5" max. travel on THK rails.Features: -- Windows based PC computor with large touch screen menue for quick set-up, new door or custom door stiles can be programed in minutes, automatic operation from one style and size of door to the next, straight raised panels & widths of stile or rail and end tenoning work the same. -- Electronic sensors measure the length of the part to be cut allowing for various width panels or rails to be shaped consecutively, once a door is pre-programmed it can be re-called.Complete with: Electronic brake on spindles, (2) 5" dia. outlets for dust collection.

Torry Hiddema
800-374-5009 ext:371
Call

1999 Unique 250  Shaper
$8,700

UNIQUE 250 Raised Panel Door Machine General Specs: -- 7.5 HP belt driven spindle at 7,800 RPM, 1-1/4" x 5-3/4" stackable multi-cutter spindle to mill stile, rail, & raised panel profiles.Specifications: -- 1-1/4" Spindle, stackable cutter spindle with push button indexing to significantly reduce setup time as each station is pre-set and adjustable. -- Moveable 12" x 66" rolling table w/pneumatic 66" hold-down bar, 2-way linear bearing movement for straight or cathedral top doors up to 58" long stroke. -- Currently wired for 230 Volt / 3-PhaseIncludes: -- One set of Arch Door Templates; -- 6 Ft cord with twist-lock 230V plug; -- Dust collector hood with 5" diameter dust chute.

Torry Hiddema
800-374-5009 ext:371
Call

1994 Unique 313  Shaper
$9,900

UNIQUE 313 Automatic Shaper for Miter DoorsMiters the end of (2) cabinet door rails on each pass.Specifications & Features: -- Automatic cycle controlled by maintenance-free PLC software for accurate & easy alignment of mitered corners; -- (2) 5 HP Dual-motors for shaping with 1-1/4" spindles. -- (2) Pneumatic clamps hold workpiece on either side while parts are being shaped, unlimited part length. -- 1" Max. part thickness, 4" max. part width. - Staggered tables allow (2) 1" thick parts to be machined simultaneously. -- Complete with: Foot valve operation, safety guards and dual hand-actuated start buttons.

Torry Hiddema
800-374-5009 ext:371
Call

2006 Unique 310  Shaper
$11,500

UNIQUE 310 Automatic Cope Shaper; Copes multiple workpieces up to 6" wide x 24" long in only (1) pass, quickly and accurately. -- Equipped with: (2) 5 HP motors with magnetic starter; (2) 1-1/4" dia. counter-rotating cutterheads eliminate tear-out on detail edge of cope/tenon cuts. -- Pneumatic safety clamps hold work in place until sliding table is returned to its forward position.

Torry Hiddema
800-374-5009 ext:371
Call

1992 Unique 250 MC  Shaper
$7,450

UNIQUE 250 MC Raised Panel Door MachineMachine to manufacture cabinet raised panel doors with (1) Operator in (2) Minutes.Specifications: -- Equipped with: 5 HP Motor belt drives spindle at 7,800 RPM, 1-1/4" x 5-3/4" stackable multi-cutter spindle to mill stile, rail, & raised panel profiles. -- Stackable cutter spindle with push button indexing to significantly reduce setup time as each station is preset. -- The change from one cutter to another is achieved via a select roller wheel for each operation. -- Complete with: Table w/pneumatic holddown, 2-way linear movement for straight or cathedral top doors up to 50" long stroke; dust collector hood, and cutter shields.

Torry Hiddema
800-374-5009 ext:371
Call

2001 Unique 335  Shaper
$14,500

UNIQUE 335 Shape & Sanding Machine - Feed Through:3-Station feed through Shape & Sand with (1) shaper and (2) sanding stations. -- 1st Station: Shaping head, 7.5 HP - 7,200 RPM motor, 1-1/4" dia. arbor. -- Variable Speed: 6,000-9,000 RPM, reversible, single tool cap., adjustable spindle height. -- 2nd & 3rd Stations: (2) Sanding spindles, 1" dia. arbors, each with 2 HP motor, 0 - 1,500 variable RPM, vertical and horizontal adjustment, tilt up to 45°; air jets for abrasive cleaning. -- Features: Dial indicators reading in 0.001" on the following axis: 1st spindle vertical, infeed fence, 2nd sanding heads both horizontal & vertical. -- Feed System: Variable speed feed chain with "non-slip" replaceable chain pads with up to 35 FPM feed rate; overhead holddown with (2) staggered rows of rubberized holddown rollers; roller track channel on outboard panel support for wide panels. -- Includes: 5" Dust port for shaping head and 4" port for each sanding head; conveniently located operator panel at infeed.

Torry Hiddema
800-374-5009 ext:371
Call

2007 Unique 250 GT  Shaper
$18,500

UNIQUE 250 GT Automatic Cabinet Door Shaper:Machine to manufacture cabinet raised panel doors with (1) operator in (2) Minutes. Equipped with: -- 10.2 HP Motor direct drive spindle at 7,800 RPM, 1-1/4" stackable multi-cutter spindle to mill stile, rail, & raised panel profiles. -- Stackable cutter spindle with push button indexing to significantly reduce setup time as each station is preset, to change from one cutter to another via select switch for each operation. -- 2-Way linear movement for straight or cathedral top doors up to 50" long.Complete with: -- Table w/pneumatic holddown, dust collector hood, and cutter shield.

Torry Hiddema
800-374-5009 ext:371
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved