You Have Selected

 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
449 Results Found for BioMass Viewing 1 - 20 of 449 results
RECENTLY ADDED
PREMIUM LISTINGS
2012 Bandit Beast 3680 w/890 Hrs., Chipper Mill, Remote, Chip Blower, CAT 700 HP Engine, Call For Price, Negotiable!! 330-853-2428
Equipment Location:Denver, CO
Direct Polymers Plastics Recycling
330-853-2428
CBI Horizontal Hog Tub Track Wood Grinder 4000, One Owner, 2,200hrs., 1000HP CAT, 84K lbs, 215-651-5753 or 215-257-5150
Equipment Location:Sellersville, PA
Toth Land Clearing
215-651-5753
2005 Morbark 30RXL, 8,300hrs, New long 3412E block installed by CAT w/ 1,200hrs, Joystick controls, autofeed, heat/AC, ,light package, onboard compressor, Proheat, All wear surfaces have been replaced, Large infeed yoke. $125,000. (401)623-0347
Equipment Location:Coventry, RI
Premier Tree Service
401-623-0347
1998 Morbark 1300 Tub Grinder complete rebuild on Cat 3412 Engine $38,000 with 2000 hours on it, new clutch,new 4×6 screen, new bearings and housings, , New Tires, New Light Bar, Location Ohio, Its Ready to Work! Priced Right! Caterpillar 1050 HP Engine, with Loader, Checked out by Morbark Rep PRICE REDUCED $105000
Equipment Location:Elkins, WV
Reckart Equipment Co.
304-614-7939
This item will sell regardless of price to the highest bidder on Oct 11. Roller and ring die pellet mill - 60 HP electric motor, 0.75 kW feed motor, 1.5 kW feed auger motor, Cutler Hammer adjustable frequency AC drive, Additional 14" ring die. For seller contact, detailed pictures and bidding visit https://www.purplewave.com/auction/181010/item/EO9354
Equipment Location:Galena, MO
Purple Wave Auction
785-537-7653
STANDARD LISTINGS
ACROWOOD 52” 5216-6 Chipper with the following major features: -- 52” Disc. -- Slant Disc configuration. -- Converted to KEY KNIFE System. -- 125 HP Drive Motor. -- Includes existing Spare Parts. -- New Primer & Paint.
Equipment Location:PACIFIC NORTHWEST
Bill Christoffersen
800-374-5009 ext:365
AIR BURNERS Product No. 4905 2018 Models Five Available All Units Have 1000 Hrs Or Less See Spec Sheet PRICE: CALL FOR PRICING Machine Type: Air Burner Manufacturer: Air Burners Model: T-300 Year: 2018 Machine Location: South East
Equipment Location:South East
Keith Comeau
704-929-9122
AIROFLEX "HydroFlex" Model 37.5 Trailer Dumper with 38 FT x 10 FT deck. -- Hydraulic power unit. -- 50 Ton capacity, full tilt. -- Stationary Backstop, no pit required. -- Ready to load... save removal costs. -- This unit was previously tipping "hog fuel" wood trailers.
Equipment Location:PACIFIC NORTHWEST
Bill Christoffersen
800-374-5009 ext:365
AIR-O-FLEX Full Truck and Trailer (also B-Train) Dumper complete with the following features: -- 100 Ft. Tilting Deck to handle full truck and trailer or B-train and tractor. -- Full tipping angle. Great for wood chips, shavings or sawdust. -- Drive-Thru Style for rapid unloading. -- Material Discharge Conveyor. -- Hydraulic Power Pack. -- Steel Approach Ramp. -- Installation Drawing. -- Partially dismantled. Professional rigging and loading is available. Shipping will require two trucks.
Equipment Location:WESTERN CDN
Bill Christoffersen
800-374-5009 ext:365
12" CHIPPER KUBOTA DIESEL 54HP PINTLE HITCH
Equipment Location:Manton, MI
Lutke Equipment LLC
231-824-9505
75 HP Motor Swinging Hammers Infeed Hopper
Equipment Location:NY
Carolina Machinery Sales, Inc
704-288-1904
AmeriMulch Mini Mite Colorizer 32' Belt conveyor/Radial Stacker Will produce approx 65 yards per hour
Equipment Location:AL
Carolina Machinery Sales, Inc
704-288-1904

Anaconda Conveyor

Call for Price
45' Log Trough Endwise Conveyor with electric drive.check out our full inventory at www.benjones.com
Equipment Location:Columbus, GA
Ben Jones Machinery
706-324-2604
1979 Asplundh JEY 12756 Chipper - Ford Engine - 300 Horsepower - Pintle Hitch - Average Condition
Equipment Location:Largo, FL
Apollo Equipment
800-982-2844
(2) 20' Augers with Motor and Drive
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Hatlapa Grinder W/ STAND
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Babcock & Wilcox Sterling Boiler -Model H-30 300 PSI water tube boiler produces 50,000 pph of steam at 175 psi working pressure. Includes nice boiler building, two Zurn multi-clones ash collectors, Cochran de-airator, ID fan, all controls and accessories. Complete system. Reasonable offers considered. Location: Mississippi. Item # 12571. SEE OUR SITE AT www.benjones.com FOR MANY OTHER LISTED BOILERS.
Equipment Location:HATTIESBURG, MS
Ben Jones Machinery
706-324-2604
Babcock & Wilcox Wood Dust/Oil Fired Steam Boiler
Equipment Location:Franklin, VA
LPS Equipment & Acquisition Co.
731-986-4351

BAKER-RULLMAN Drum Dryer

Call for Price
Baker-Rullman 10.5 x 32 Triple Pass Dryer Webb 20-D Burner Controls for both systems Fisher-Klosterman Cyclones- System 125 HP Fan/Blower to the Cyclones Walking floor trailer, screen and hammermill are not included. This system is still in place and ready to be removed from teh current location.
Equipment Location:CO
Carolina Machinery Sales, Inc
704-288-1904
BAKER-RULLMAN (or HEIL) 8-24 Drying System built around an 8' x 24' Triple-Pass Rotary Drum Dryer;Complete with the following major components and features: -- BAKER-RULLMAN 8 Ft. x 24 Ft. 3-Pass Dryer Drum with new drum Seals. -- BAKER-RULLMAN Trunnion Bases and Drum Drive. -- Dryer Input Hopper Feeder with controlled speed Screw bottom and new $4,000 Gearbox. Material Input Auger. -- Dryer System Main Fan. -- 10 MM BTU capacity WEBB Biomass Burner with $8,000 of new refractory with professional installation. -- Fuel Bin with screw bottom. Screw speed is automatically controlled by Burner Controls. -- Cyclo ne Collector. -- Cyclone Discharge Screw Conveyor. -- Includes Electrical with $12,000 in new components. -- Burner Modulation Controls. -- NOTES: ● The trunnions are all in good condition with $4,000 of new bearings. ● This type of system is commonly capable of drying up 3 to 4 Tons per hour of sawdust or up to 60 - 65 yards per hour of molder shavings, depending upon input/output moisture content levels. ● A WEBB burner requires about 3/8" minus material and 20% or less moisture content. Often fuel is taken from the product output and there is a fan available on this system for that purpose.
Equipment Location:SOUTH, AL
EX-FACTORY INC.
704-841-2001