Equipment For Sale

2021 Morbark 1821 Brush Chipper, Engine Ford 170HP Gas Engine, Hydraulic Winch, 2-1/2" Pintle Hitch, UCC Lighting, ONLY 187 Original HOURS , Ready for Work. Height 8'11" Width 7'3" Length 18'1" Gross weight (approximate) 8,900 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Morbark 50/48 Whole Tree Drum Chipper. 11,000 hours on a rebuilt 3412 CAT engine with 760HP, Auto Feed, Fire Suppression, Radio Remote and Tether cord. Machine was repainted. Length 40'8.25" Height 12'6" Width 9'9" Gross Weight (approx.) 72,120 lb

1998 Morbark 2400 Chipper, ONLY 1800 Original Hours, Perkins 185 HP Turbo Diesel Engine, Hydraulic Tongue Jack, Hydraulic Lift Assist Cylinder, Twin Disc SP 211 Clutch, Tires are at 50%, In Excellent Condition. Two Owner Machine, Ready for Work. Weight: 15,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Morbark 6600 Horizontal Grinder, one owner. 91,440 lbs. Length: 44'11" in transport Height: 13'6" in transport Width: 11'10" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 Morbark 23WCL 23" disk chipper With loader Good condition Includes: extra (new and used) knives, counter knives, & top plate

2009 Morbark 30/36 Tree Chipper -1045 Original hours -C13 440 HP -A/C blows cold -Clean tight chipper

1998 Morbark 1300 Tub Grinder -9000 hours meter doesnt work but has original ecm can read it -Loader -Few minor leaks -Mill in great shape -Augers are freshly hard faced -Belts in good shape -New injectors -Comes with an extra set of new hammers and tub rollers -A/c blows ice cold

Michigan (Morbark) Knife Grinder 4x4

2014 Morbark 1200XL-WCL -7571 hours -CAT C27, 875 HP -Cab Loader Option -New Floor -Spare Rotor, Screens, Tips, and Parts Package -Turn Key Ready to Grind

2021 Morbark 30/36 whole tree chipper -1884 hours -Cat Engine -Pintle hitch towed -Extra sets of knives and parts -Factory Engine warranty remaining PRICE REDUCED!!!!!!!

1995 Morbark 1000B -Reman jd engine(6500hrs) -Joystick controls -Saw hook ups -Live heel -Many new hoses -Tight turn table -Radio -Heater

-400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back

1993 Morbark Model 1200 Tub Grinder, Equipped with a Cummins 650 HP Engine, Autofeed, Wireless Control, New Clutch 1 year ago, Hours are Unknown, New Turbo, New Injectors 300 Hours ago, Ready to Work. Weight 55,622 lb Length 38.15 ft Width 11.9 ft Height 12.8 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Morbark 30/36 Mountain Goat Track Whole Tree Chipper Caterpillar C-15 Engine 4,145 Hours, Auto Clutch Undercarriage 85% To 90%, Enclosed Cab with Heat and Air Conditioner, 1200 Log Grapple, Ready for the Woods. Length 31'6" Height 12'5.5" Width 8'5.25" Gross Weight 44,760 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Rebuilt clutch, C18 764HP, fully functional, ready to work.

Pintle Hitch 4800 Hours Year To Be Confirmed

2019 Morbark 40/36 Drum Chipper -1500 hours -C-18 CAT -Deleted -Clean Unit

2016 Morbark 6600 Track Horzontal Grinder, Cat C32 1200 hp with 10,022 hours, Radio Remote, Magnetic Head Pulley. Work done. 5/23 fan pump replaced $8000 6/22 poclain feedwheel motor replaced. $20,000 4/24 Fan bearing replaced. $2000 5/24 yoke cylinders rebuilt. $500 5/24 new belly belt and all new parts associated with except the pulley drum. Shaft, b-locs and bearings replaced. Also metal siding and skirt. $8-10,000 6/24 2 new turbos. $12,000 6/24 new fan motor and side load adapter. $6500 6/24 feedwheel bearing replaced. Possibly shaft. $1500 6/24 discharge bottom bearings replaced Work done to infeed floor. Belly belt motor rebuilt. 3 injectors have been replaced. 2 out of 3 wiring harnesses replaced. Rebuilt fan motor. Has newer grates. (2) 8” hex. (2) 7x16 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 Morbark Model 1200WCL Tub Grinder, Caterpillar 3412 Engine, hours unknown, Joystick Controls, Square Wear Plates, Enclosed Cab with Heat, Clutch replaced recently, 4" Screen and 2" Round Secondary Screens. Length 36 ft 0 in Width 11 ft 11 in Height 13 ft 6 in Weight 50,020 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Morbark 4600XL Horzontal Track Grinder, Cat C27 with 7,500 hours, Magnetic Head Pulley, Radio Remote. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.