• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
5 Results Found for Router Viewing 1 - 5 of 5 results
RECENTLY ADDED
STANDARD LISTINGS
THERMWOOD "C 42" Twin Table CNC Router with ATC. -- Dual 5' x 5' Moving tables in a front-to-back configuration. -- Equipped with: (1) 10 HP ATC spindle, variable spindle speed from 3,000 - 18,000 RPM, 4-position wine-rack tool changer. -- Features: High performance closed loop SIEMENS Servo motors driving precision ball screws on all axes, feed speeds up to 900 IPM on the X- & Y-axis and 600 IPM on the Z-axis. -- Guide way & ball screw bearings serviced by an AUTOMATIC lubrication system. -- THERMWOOD "OS/2 Warp system" Controller:WINDOWS Based Control, "E-Cabinet" software ready, hand held programmer with pulse generator, 14" color monitor, hard drive, 85-key/101-emulation Qwerty keyboard for data entry. -- NOTE:The difference between this and the 91000 control is "it is pretty comparable. Programming is exactly same. It still has the same file system. We use a disc to put everything in. The only difference is the amount of letters your able to use to name your files and also which function key you use to put them in. -- RS-232 port and floppy drive for PC communications, feed rate & spindle speed override; mounted in an air conditioned Nema rated control cabinet. -- Complete with:(1) 18 HP Vacuum Pump, assorted tool-holders, documentation and manuals.
Equipment Location:MIDWEST, AL
EX-FACTORY INC.
704-841-2001
THERMWOOD C 40 4 X 8 CNC Router with ATC:4' x 8' (49" x 97") Moving table with a machined aluminum table, single-zone vacuum plenum. -- Equipped with:(1) HSD ES919A2P type ATC Spindle, 10.7 HP variable spindle speed from 3,000 - 24,000 RPM with a 3-position bar type tool holder for ISO 30 tooling. -- Features: High performance closed-loop SIEMENS AC Servo motors driving precision ball screws on all axes with feed speeds up to 1,200 IPM on the X- & Y-axis and 600 IPM on the Z-axis. -- Operator & Machine Controls: THERMWOOD "91000" WINDOWS based Control, "E-Cabinet" Software ready, 3-axis simultaneous motion, 14" color monitor, 20.4 GB hard drive, CD ROM drive, 3-1/2" floppy disk drive, 85-key/101-emulation Qwerty keyboard for data entry, network card and RS-232 port for PC communications. -- Features:Feed rate & spindle speed override; mounted in an air-conditioned Nema rated control cabinet. -- Complete with:5 HP BUSCH, vacuum pump (220 volt single phase), assorted ISO 30 tool holders, documentation.
Equipment Location:SOUTHWEST
Norm Schust
800-374-5009 ext:445
THERMWOOD C 42 TURRET Twin Table Multi Spindle:Twin 5' x 5' worktables can operate independently for unload/load on one table while the other is in process, or together as (1) large 5' X 10' work area. Each table has a single zone vacuum plenum. -- 8-Position Rotary Turret Head #1-9hp #3-3hp #4-4hp #5-3hp #6-4hp #8- Has no tag, All motors are integrated into the revolving turret head; 15 KVA solid-state inverter controls the spindle speed that is variable from 1,000 - 18,000 RPM. -- Machine drive: Is positioned with AC Servos, 1,200 IPM positioning feed rate on X- & Y-axis on a closed loop Servo drive system; includes "Tool Sensor" & "Auto-Lube" System for linear bearings and ball screws. -- Equipped with: THERMWOOD "91000" Super Controller with: 14" CRT Screen, RS-232 interface, large hard drive, and 3-1/2" floppy disk drive all in sealed cabinet w/built-in heat exchanger. -- Features:Full multi-tasking operating system with a Windows type operator interface; high speed M & G code interface, self-diagnostics, absolute/incremental programming, and hand-held programmer. -- Includes: (2) 10 HP vacuum pumps and manuals.
Equipment Location:MID ATLANTIC
Norm Schust
800-374-5009 ext:445
THERMWOOD CS 40 CNC Router with Tool Changer: 4' x 8' (49" x 97") Moving table with a machined aluminum table, single-zone vacuum plenum. -- Equipped with: (1) HSD ES919A2P type ATC Spindle, 10.7 HP variable spindle speed from 3,000 - 24,000 RPM with a 4-position rear mount wine rack tool changer. -- Features: High performance closed-loop SIEMENS AC Servo motors driving precision ball screws on all axes with feed speeds up to 1,200 IPM on the X- & Y-axis and 600 IPM on the Z-axis. -- Operator & Machine Controls: THERMWOOD "91000" WINDOWS based Control, "E-Cabinet" Software ready, 3-axis simultaneous motion, 14" color monitor, 20.4 GB hard drive, CD ROM drive, 3-1/2" floppy disk drive, 85-key/101-emulation Qwerty keyboard for data entry, network card and RS-232 port for PC communications. -- Features: Feed rate & spindle speed override; mounted in an air-conditioned Nema rated control cabinet. -- Complete with: Vacuum pump for hold down, assorted ISO 30 tool holders, documentation and manuals.
Equipment Location:MTN/CENTRAL CDN
Norm Schust
800-374-5009 ext:445
THERMWOOD C 40 CNC Router with ATC spindle:"Came out of production at a school shop, its in perfect condition for the age" 5' x 5' (60" x 60") Moving table with a machined aluminum table, single-zone vacuum plenum. -- Equipped with:(1) 10 HP ATC type Spindle, variable spindle speed up to 15,000 RPM with a (5) position wine rack tool changer. -- Features: High performance closed-loop SIEMENS AC Servo motors driving precision ball screws on all axes with feed speeds up to 1,200 IPM on the X- & Y-axis and 600 IPM on the Z-axis. -- Operator & Machine Controls, Software update 2003: THERMWOOD "91000" WINDOWS based Control, "E-Cabinet" Software ready, 3-axis simultaneous motion, 14" color monitor, 20.4 GB hard drive, CD ROM drive, 3-1/2" floppy disk drive, 85-key/101-emulation Qwerty keyboard for data entry, network card and RS-232 port for PC communications. -- Features:Feed rate & spindle speed override; mounted in an air-conditioned Nema rated control cabinet. -- Complete with:Assorted tool holders, vacuum pump and Documentation.
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445