Tennoners For Sale

GABBIANI S.Q.V. Double End Tenoner &#9679 Double sided with Scoring, hogging, top/bottom cope, shaping, belt sanding, belt sanding &#9679 2,500 mm (102") Max. width and 235 mm (9-1/2") min., programmable motorized opening with LED readout.Specifications: -- 112 mm (4.72") max. part thickness. -- 900 mm (36") Load area in front of holddowns driven upper holddowns caterpillar type -- 235 mm (9-1/4") min. length, left side fixed right side moveable.Each side equipped with: -- 1st Station: Jump scoring, 2.4 Kw (3.2 HP) motor. -- 2nd Station: Hog/trim saw, 7.5 Kw (10HP) motor. -- 3rd station: Cope unit Top,5.5 Kw (7.5 HP) motor -- 4th Station:Cope unit bottom 5.5 Kw (7.5 HP) motor. -- 5th Station: Cope unit, 8 Kw (10.8 HP) motor -- 6th Station: Belt sanding unit with pneumatic 7.5ontrols. -- 7th Station: Belt sanding unit with pneumatic controls. -- Variable feed speed 0 - 36 m/Min (120 FPM), 7.5 HP feed drive, -- Feed chains with disappearing dogs, platform feed chain with rubber faced track pads and separate control panel with controler, contactors and overloads. - -- Full sound enclosures.

Gabbiani Double End Tenoner Available approx August 1, 2023 Can also be paired with a direct transfer to a [Homag DET](https://www.carolinamachinerysales.com/listings/4073344-used-2006-homag-fl20-double-end-tenoner) at the same site.

Greenlee tennoner with 5 heads on each side. Call 800-459-2148 for more info.

GRIGGIO - "GT-4", Single End Tenoner4-Head Tenoner with: Sliding Table & Holddown. -- 1st Head: Trim saw, 10" dia. -- 2nd/3rd Head: Top & bottom tenon heads; 6.6 HP motor belt drives saw & tenons; 4" max. tenon length and 3/16" - 2-1/8" thickness. -- 4th Head: Cope head; 4.6 HP motor; 9-7/8" - 11-7/8" max. cope cutting circle; 3-15/16" max. tool length. -- Equipped with: 15" Long x 6" wide sliding table, travels 63" & tilts 0° - 30°; overhead holddown with tilting fence line. Also Included: -- Cutterhead for top/bottom tenon. -- Cutterhead for coping.

HOLYTEK - YRT 100, ...Round End Tenoner -- Twin positioning tables with: Traversing single cutterhead design; fully automatic work cycle; tables alternate into the cutting cycle for continuous operation; rotational movement of cutterhead is externally adjusted. Capacity: -- Width of tenon: 0" - 3.9" Plus both radii; thickness of tenon: 1/8" - 1-3/16"; depth of tenon: 3/8" - 1-3/4"; 1/4" - 3-1/2" with special tooling. Specifications: -- Belt driven cutterhead, 3 HP - 6,000 RPM spindle; 1 HP motor with variable rotational movement of cutterhead; straight, simple or compound angles are easily adjusted with tables. -- (2) 14" x 9" Tilting tables: 0° - 15° up, 0° - 30° down, and 0° - 20° to the side; each table with: Pivoting fences & miter gauges, vertical height adjustment . -- Overhead pneumatic holddowns. -- Production rate approx.: (13) Pieces per Min.

Homag Double End Tenoner System will be available approximately August 1, 2023 Also available with a direct transfer conveyor and [Gabbiani DET](https://www.carolinamachinerysales.com/listings/4073350-used-2003-gabbiani-sqv-sqi-double-end-tenoner) currently running inline.

PMK C 1205 Single End Coping Machine -- With the C-1205 Coping Machine you can run your Styles first or run your cope first, this machine using a 7.5 HP motor has counter rotating spindles to insure Chip free coping of either square. -- Single profiled or double profiled parts. Since we are only coping one end at a time the length doesn't matter. We can also cope more than one part at a time up to 13.5" wide on the C-1205. -- Two counter-rotating spindles 1.25" in Diameter. -- Capacity of maximum (2) cutters on stack tooling -- Spindle Speed 7,000 RPM; cycle time approx. (4) Seconds. -- Side Pressure Clamp to insure proper alignment with a fence. -- Cutter Heads totally enclosed for Safety!

PMK C 1203 Single End Coping/Tenoning Machine -- With the C-1203 Coping Machine you can run stiles first or cope first, this machine using a 5 HP motor has counter rotating spindles to insure chip free coping of either square, single profiled or double profiled parts. -- Since we are only coping one end at a time the length doesn't matter. We can also cope more than one part at a time up to 9.5" wide on the C-1203. -- (2) Counter rotating spindles 1.25" diameter. -- Spindle Speed 7,000 RPM; cycle time approx. (4) seconds. -- Side Pressure Clamp to insure proper alignment with fence. -- Cutter Heads totally enclosed for Safety!

1 HP tenoner Approx. 2HPsaw Approx 28" x 16" table

Progressive Systems Inc End Matcher

SCM - Concept 2000, ...Double End Tenoner.Double End Tenoner with: Jump scoring, Hogging, Shaping with stacked tooling. -- 122" Opening cap., motorized opening with keypad entry & LED readout, 12" infeed chain area in front of holddowns. -- 0" - 4" Motorized thickness opening with mechanical digital readout. -- 6" Min. width, 2-post machine. Each side equipped with: -- 1st Station: Jump scoring. -- 2nd Station: Hogging unit. -- 3rd Station: Coping head with stacked tooling capacity (manually operated). -- 4.5 HP Drive for 10 - 60 FPM variable feed speed. -- Chain dogs on 15-3/4" centers, rubber top nonmarring chain pads. -- Heavy-Duty chain links with: Needle bearings, automatic oil mist chain oiler, automatic brake on feed motor with emergency stop.Complete with: -- Upper driven holddowns with: Continuous feed belts; feed beams can be disengaged for conventional part feeding in front of dogs. -- Mobile remote control for setup; dual lead screw for traversing beam; exhaust hoods on all heads.Note: Tear down and loading not included.

SCMI Concept NT Double End Tenoner Specifications coming.

SILVER - SMD-4830AP, ... Double End Tenoner 8-Head Double End Tenoner with: Scoring, hogging saw, shaper, shaper. -- 120" Max. width opening: With Scoring - Trim/Hog; (2) High speed cope heads.Specifications: -- Min. length: 10". -- Thickness: 3/16" Min. to 3-1/4".Each Side equipped with: -- Infeed extension: Approx 24". -- 1st Station: Scoring saw, 4 HP motor. -- 2nd Station: Trim/Hog head, 7.5 HP motor. -- 3rd Station: High speed cope head, 10 HP motor, 7,500 arbor speed. -- 4th Station: High speed cope head, 10 HP motor, 7,500 arbor speed. -- Feed speed: 14 - 55 FPM, Sound enclosure, motorized opening with mechanical readout.Also included: -- Sound enclosure. -- Set of assorted tooling.Tear down complete.

Single End Rounding Tenoner - Brand Unknown -- Heavy-Duty Metal Lathe machine base for tenoning log up to 7-1/2" dia. -- Tenon head with: 2 HP Drive motor, gear driven. -- Tenon: 2' Dia. -- Hydraulic feeding & clamping -- VICKERS Hydraulic Power Unit: 1.5 HP Motor.Note: Well-built Machine with minimal use.

VOORWOODM 15 CNC Round End Tenoner & Mortiser --The "M15" Miter Machine is designed to rapidly make mortise and tenon cuts at 0°, 45°, and 90° degrees. Parts can be up to 1.5” thick and up to 4” wide, and of ANY length. --A primary application for this machine is for miter cabinet door frames. Parts can be quickly transferred from left to right. They are mortised on the left side of the machine and tenoned on the right. The machine can also mill the slots. --Specifications & Equipped with: -- The mortise station has (3) servo-controlled axes (X, Y, and Z) that are coordinated by the machine controller to achieve complex CNC motion. It is equipped with a collet-style router spindle for cutting. The tenon station uses the same X- and Y-servo-controlled axes as the mortise station and is configured for pneumatically actuated in-and-out movement along the Z-axis. The tenon station is equipped with a direct drive shaper spindle for cutting. -- -- Pneumatic clamping assemblies with non-marring urethane pads are mounted to the hold-down assembly to secure the parts during cutting and these can be adjusted to various locations over the cutting surface. -- -- M15 Miter Machine operator interface consists of a colored touch screen. For simplicity, the entire calibration, setup, and monitoring of the machine are accomplished using only four touchscreen displays. The program designs the depth and location of both the mortise and the tenon. When the design is complete, it is saved in a recipe format. Once this recipe is opened, the operation is as simple and boils down to feeding the substrate into the machine. -- -- The full-color touchscreen panel is located on the front of the machine to provide easy access for setting up or operating the machine. Clamping and shaping operations are controlled by operating lighted pushbutton switches. --Also Included: --÷Additional tooling (worth $3,500) --÷ Replacement motr (worth $975) --÷ Few small replacement parts

WEINIG 051 Single End Tenoner W Motorized Feed TableSpecifications: -- 2-Head Tenoner for cabinet and window parts. -- (1) Trim saw & (1) Stacked cope head, both direct motor drive, sliding table with fence line and (2) pneumatic hold downs, control panel and large asssortment of high quality tooling.Actual model is WEINIG 051

MLS Number 10684323 Wisconsin Automated Machine C-450 Tennoner Single end tennoner Automatic double head coping tennoner Model C-450 Serial: C-450-6901-00 230 volts, 3 phase, 60 Hz. Allen-Bradley and Motortronics electrical Motors are 230 volts 48 full load amps. 15.2 amps on largest motor