You Have Selected

 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
1397 Results Found for Woodworking Viewing 1 - 20 of 1397 results
RECENTLY ADDED
PREMIUM LISTINGS
The HBR-300 features hydraulic wheel tensioning, inverter feed drive, powerful 30hp main motor, oil mist cooling system, and automatic electronic digital blade height setup. This machine is in excellent used condition and mechanically sound. Maximum material size 300 mm X 300 mm (12" x 12") Saw wheel motor: 30 hp Dust hood outlet diameter: 100 mm x 2 (4"x 2") Feeding motor: 1 hp with inverter Distance from blade to conveyor: 2-270 mm (5/64" - 10 5/8") Saw blade width: 50 mm (2") Saw blade length: 4980 mm (196") Saw blade speed: 25.4 M/s Conveyor belt size: 270 mm x 4200 mm (11" x 165") Feed speed (variable): 0-30 M/min (0-100 ft/min) Feed Conveyor Tilt: 30 Degrees Conveyor height from floor: 1016 mm (40") Saw wheel diameter: 700 mm (28") Blade lift servo motor: 0.5 hp
Equipment Location:Sterrett, AL
Smith Companies
205-620-4455 ext:111
Logosol PH260 Planer/Moulder, 4 Sided, Single Phase $6,000 570-262-4744
Equipment Location:Wapwallopen, PA
Carl Balliet Logging & Lumber
570-262-4744
Weinig Powermat 500 Moulder With Chain deck and Roller Conveyor With Automated Pusher -5 Heads -#1: 15 HP Bottom -#2 & #3: 15 HP Side Heads HSK (1 brand new Fence side head) -#4: 20 HP Top -#5: 20 HP Bottom (new spindle) -Extra Tooling -Cutter Heads -Spacers -HSK Tool Holders -Rolls -Planer Heads -Roller Conveyor with Chain Deck & Pusher Conveyor -Dimensions: 12 x 20 roller conveyor w/ pusher -Chain deck: 144” x 142” (6 plastic Chains) All units are in excellent used conditioned. Fully functioning infeed/outfeed moulder line.
Equipment Location:Sterrett, AL
Smith Companies
205-620-4455 ext:111
STANDARD LISTINGS
DOUCET SPFM High Production End Matcher For Strip or Plank Flooring. 10" to 96" board length capacity; 3/8" to 3/4" thickness capability minimum width 1 3/4"; maximum width 3 1/4", 5 1/4" or 8 1/4" (relative to traverse 6", 9" or 12" bar spacing). End-Matcher model SPFM is designed for high production and is suitable for production capacities of 20,000 to 30,000 board feet of random length Strip or Plank Flooring per shift.Specifications: -- High precision ductile iron chains, hardened steel sprockets, massive traverse bars -- 20 HP Electric Motor with a Variable Speed Drive up to 80 feet per minute -- 5 HP spindle motors -- 9 inch center to center standard traverse bar spacing -- Fully enclosed machining centers, all adjustments made easy by dial indicators -- Dynamic braking on all spindle motors -- Electronically controlled chain lubrication systemStandard Features: -- 27' long by 96" wide feed conveyor -- 3" Pitch ductile iron chains, linked by 3/4" press fit dowel pins, driven by 15" hardened steel sprockets -- Massive 2" by 3/4" traverse bars suitable for machining 0.375" to 0.75" thick flooring -- Air Bag & Belt hold-downs -- 9" Center to center traverse bar spacing (6" and 12" possible) -- Feed speed up to 80 FPM powered by a variable flow 20 HP hydraulic power unit -- Injection type chain lubrication system -- (3) 36" Wide side-shift conveyors -- 3" Diameter side-shift rollers dual driven by 1 HP motors -- Tongue and groove machining centers laid out on opposite sides of the feed conveyor -- Machining centers are totally enclosed and equipped with interlocked doors -- (2) 6" Dust collector connectors on lower side of each machining center (1000 CFM each) -- Tongue machining center with 3 - 5HP spindle motors, (trimmer, top and bottom tongue groovers) -- Groove machining center with 2 - 5HP spindle motors, (trimmer and horizontal groover) -- Tooling system for regular or beveled top end-matching -- 12" Dia. x 30mm bore trim saws and 12" groover saws -- All spindle motors feature position indicator dials -- Dynamic (emergency) braking on all spindle motorsEXTRAS: (2) Sets of beveled T&G Cutterheads and (1) set of flooring T&G Heads
Equipment Location:SOUTHEAST
Jeff Terrill
800-374-5009 ext:349
DOUCET 30-Section Clamp Carrier• (30) Sections; 8.5' wide usable clamping width -- (8) Clamps per section approx. (total of approx 234 clamps).with quick attach system -- 32" Opening clamps, 2-1/2" high x 4" jaw width. -- Complete with: Pneumatic panel flattener, Heavy-Duty, 5 HP hydraulic pump for rotation drive, hydraulic torque wrench clamp tightener;Actual model # "SRH-30.5-8.5-240-32-R-30".
Equipment Location:MID ATLANTIC
Louis Sicotte
800-374-5009 ext:329
DOUCET 40 SAection Automatic Clamp Carrier -- 40-Section, 8-1/2' cap., -- (6) clamps per section, total of (240) clamps, 36" Opening, 2-1/2" high jaws. Equipped with: -- (2) Pneumatic panel flatteners, -- Hydraulic rotation -- Hydraulic clamp tightener via PLC controled automatic operator.Actual Model: SRR-40-8.5-240-36
Equipment Location:WEST COAST
Louis Sicotte
800-374-5009 ext:329
DOUCET 40-Section Clamp Carrier• (40) Sections; 8.5' wide usable clamping width -- (9) Clamps per section (total of approx 360 clamps).with quick attach system -- 32" Opening clamps, 3-1/2" high x 4" jaw width.Complete with: -- Pneumatic panel flattener, -- Heavy-Duty, 5 HP hydraulic pump for rotation drive, -- (2) hydraulic torque wrench clamp tightener;
Equipment Location:EASTERN CDN
Louis Sicotte
800-374-5009 ext:329
DOUCET 16-Section Clamp Carrier(16) Sections with 16.5' wide usable clamping width -- (16) Clamps per section (total of 256 clamps). -- 32" Opening clamps, 3-1/2" high x 4 1/2" jaw width.Complete with: -- (2) Pneumatic panel flattener. -- Heavy-Duty, 5 HP hydraulic pump for rotation drive -- (2) Hydraulic torque wrench clamp tightener;Actual model # "SRH-16-165-256-32".
Equipment Location:EASTERN CDN
Louis Sicotte
800-374-5009 ext:329
DOUCET 30-Section Clamp Carrier• (30) Sections; 8.5' wide usable clamping width -- (6) Clamps per section (total of approx 180 clamps).with quick attach system -- 32" Opening clamps, 2-1/2" high x 4" jaw width. Complete with: -- Pneumatic panel flattener, -- 5 HP hydraulic pump for rotation drive, -- Manual clamp tightener;Actual model # "SRM-30.5-8.5-180-32-M".
Equipment Location:MIDWEST
Louis Sicotte
800-374-5009 ext:329
DOUCET 60-Section Clamp Carrier(60) Sections; 10.5' wide usable clamping width. -- (10) Clamps per section (total of 590 clamps).with quick attach system -- 32" Opening clamps, 3-1/2" high x 4" jaw width.Complete with: -- (2) Pneumatic panel flattener, -- Heavy-Duty, 5 HP hydraulic pump for rotation drive, -- (2) Hydraulic torque wrench clamp tightener; -- (1) Automatic Hydraulic un-tightener located on top of the clamp carrierNote: Already tear down and ready to ship
Equipment Location:EASTERN CDN
Louis Sicotte
800-374-5009 ext:329
30 sections carrier with clamp and pump and extra clamp parts, or call and make an offer.
Equipment Location:Woonsocket, SD
605-350-4272
DUBOIS AUTOMATIC PANEL FEEDER: -- Specifications:97" Length capacity, 49" width capacity, 1/2" min. thickness, 3" max. thickness, 36 lb max sheet weight, 60" max. stack height (with pallet), 35 FPM max line speed. (2) Southworth X-lifts: 2000# capacity, 48" x 96" table & 3 HP hyd. pack. -- Pin lift gantry: 45" x 92", 168" belt driven track , 3 HP motor. The lift system was converted from a vacuum lift to a pin lift system (1500 CFM NY blower & plenum still on machine and included). --Dubois "ARC 50" powered conveyor, 120"L x 64"W x 67" line height, (2) 1 HP motors.
Equipment Location:EASTERN CDN
Bob Bullin
800-374-5009 ext:346
DUBOIS RSM Rotary Spray System (ideal for Flatline Coating for Siding); 66" Width capacity, 68" W Powered belt, 2 HP drive motor. -- (16) Rotary gun capacity (8 guns installed), 66" x 90" x 5" spray area (approx). -- Equipped with: Automatic belt cleaning system, (2) NY Blower "20PLR" extraction fans. -- Spray pots, pumps, gauges and etc. included as pictured.Spray MachineFinishing Enclosure ● Painted and powder coated metallic cabin with 6 doors fitted with safety glass and safety interlock that stops rotation when doors are opened ● (4) Access and viewing door panels, two at each end ● (2) 4-Tube fluorescent light fixtures with bulbs sealed from cabin through safety glass ● UHMW polyethylene and stainless edging for the cabin for easy overspray cleanup ● Extraction fan through dry filtration and Air makeup fan delivering filtered air to the cabinRotating Carousel● (1) Rotating carousel equipped with (8) arms, powder coated for easy cleanup● Each arm is fitted with mounting system for (1) Automatic gun with adjustable angle pivot, multiple positions● Gun tracking plate which assures correct alignment of the guns across the entire arc over the parts● (1) Rotary seal with (3) chambers, two for the compressed air delivery and (1) for supplying the coating● 1 HP gear reduced motor driving the carousel, through timing belting, speed tracked by position sensor and speed calibrated by precision motion sensor● Adjustment of rotating speed via touch screen interface on control panel● Motorized height adjustment of the carousel including upper and lower travel limits via motor and gear reductionPneumatic Control● Air filtration and regulation on incoming shop compressed air● (8) Individual atomizing air controls mounted to the arms for convenient point of use adjustment● Compressed air supply to the control module mounted on the bottom of the carousel for triggering control of individual guns via electronic control.Coating Application Equipment● (8) Automatic spray guns with tip● (1) Piston Pump● Fluid supply and return hoses mounted to a free standing pump rack● All fluid fittings, regulators, back pressure valves, and pickup tubes.Computer Control● Master control panel with fused disconnect and safety interlock● Color touch screen with operator interface which includes manual triggering of guns, height adjustment, circuit selection and readout of conveyor speed. Also includes machine diagnostic system for fault detection and adjustment specifications● Photocell light curtain with receptor cells arranged linearly to allow for precise detection of parts being conveyed● SIEMENS PLC system to obtain position information from light bridge coupled with belt speed encoder which allows precise position information usedto trigger guns on and off where parts are located● Sensitivity adjustment to modify part detection
Equipment Location:WESTERN CDN
EX-FACTORY INC.
704-841-2001
•Durand plywood stacker •Will stack panels up to 5ft wide x 10ft long panels •Serial # 1286 •Was in use on skinner/trimmer line when the plywood mill went out of business •Currently stored inside, and ready to load on a truck •No charge for loading
Equipment Location:Toledo, WA
Machinery Scene
360-864-2800
DUST HOG CYCLONE WITH ROTARY AIRLOCK & 30 HP PENDU BLOWER Product No. 4880 Dust Hog Cyclone with Rotary Air Lock 30 HP Pendu Blower PRICE: $11500 Machine Type: Dust Collector Manufacturer: Dust Hog Model: Cyclone Machine Location: Mid Atlantic
Equipment Location:Mid Atlantic
Keith Comeau
704-929-9122
Dustkop Model 100N40-PL 40 HP Main Motor Approx 8,000 CFM Intake on cyclone: 23" Cyclone: Diameter 60", Height 126", stand height is approx 9' tall and can be modififed Includes plenums and Cyclone Needs new filter bags Needs new shaker motor This system has already been dismantled by a rigger and is ready to load!
Equipment Location:GA
Carolina Machinery Sales, Inc
704-288-1904
ECO SENSORS MODEL C-21 VOC GAS SENSOR.Continuously monitors VOC's in a work environment. Detects leaks and poor air quality for Woodworkers, Spray Booths, Paint Shops, Chemical Production Areas, and anywhere indoor air quality monitoring is necessary. Assists in compliance with VOC air quality regulations for hydrocarbon gases and solvent vapors. -- Includes: Built-in Audio Alarm. Provision for External Alar, or Data Logger. Battery operation. -- Features and Benefits: Monitors and Alarms below OSHA TLV for most common solvent based VOC's before they become a health hazard. -- Highly sensitive to VOC's and solvents with bright Green-Yellow-Red display clearly indicates hazard levels of gases and vapors. -- Detects down to OSHA, EPA, and other regulatory bodies for mandated levels; typically at low ppm concentrations. -- Easy to use and understand; virtually maintenance free; built-in rechargeable battery for portable use in finding leaks. Includes many safety features. -- Specifications: Scale of 50 - 100 ppm for most solvent based VOC's. -- Color Coded Bar Indicator: Green = Normal; Yellow = Caution; Red = Danger. -- Responds within seconds of VOC gas reaching the sensor on device. -- Power Requirements: 12 VDC @ 300 mA rechargeable battery. 110V AC adapters available world wide. Self-contained NiCad or NiMH battery; approx. 2 hr capacity and recharged by AC adapter overnight. -- Dimensions: 3.25" x 1.375" x 2.375". Approx. weight 5 oz.
Equipment Location:WEST COAST
EX-FACTORY INC.
704-841-2001
EKSTROM CARLSON Model EE Straight Line Rip Saw; Specifications: -- 30 HP Saw arbor motor. -- Maximum thickness 3¼” with 16” dia. saw blade (no blade). -- 5 HP Feed Motor with feed rates infinitely variable to 280 FPM. -- Triple lower infeed rollers are chain driven and are adjustable from zero to 5°. -- Elongated pressure bar housing assures the proper guidance across the entire table length.Equipped with & Features: -- Spring loaded rollers with one inch yield. -- Dual position and lubrication system, two outfeed rollers. -- Please note: Chain appears to be in very good condition.
Equipment Location:PACIFIC NORTHWEST
Joe Retzlaff
800-374-5009 ext:348
EMC PIONEER 2RK Wide Belt Sander, (2) Head: -- 37" Width capacity. Drum, Combination Head.Head Configuration: 1st Head: -- Rubber covered contact roll 180 mm diameter.2nd Head: -- Combination Head, rubber covered roller with Electronic sectioned pad 37 segments type "CP" Constant Pressure.Specifications: -- Useful working width: 950 mm (37"). -- Working thickness min/max: 3 - 170 mm. -- Abrasive belts length: 1,900 mm. -- Abrasive belt width: 975 mm. -- (2) Feed speeds: 5 - 10 m/min. -- Electronic digital display for working thickness. -- Abrasive belt oscillation by electronic photocell.Feed System: -- Electronic inverter for variable feed speeds: 2 -19 m/min.
Equipment Location:NORTHEAST
Joe Retzlaff
800-374-5009 ext:348
EMC Woody 1100 2RK Calibrating Sander with (2) Sanding Heads: Roller (Drum) and Combination Head:Full-options machine, demonstration model, used only for demos at exhibitions. Full factory warranty. Special price!Technical data: ● Useful working width 1,100 mm (43"). ● Working thickness min/max mm 3 - 190 (1/8" - 7-1/2"). ● Abrasive belt dimensions, (length) 1,900 mm (75") x (width) 1,120 mm (44"). ● Feed belt speeds adjustable by INVERTER from 2.5 to 14 m/Min (8 - 45 FPM). Head configuration: -- 1st Head: Roller Diam. 125 mm (5"), Rubber Covered Roller, 85 Shore hardness. Including On-Off Selector for roller. Roller Pressure Adjustment Control and "Grit-set System". Independent 11 kW (15 HP) Two-Speed Main Motor. Abrasive belt speed 8 + 16 m/Sec (26 + 52 FPS). . -- 2nd Head: Combination Roller & Pad. Contact Roller diameter 102 mm (4"). Rubber covered hardness 45 Shore. Roller pressure adjustment control and "Grit-Set system", electronic motorized grit compensation. Including On-Off Selector. Electronic segmented Sanding Pad type "CP" with 20 segments, each 55 mm wide (2-3/16"). Including On-Off Selector. Quick Change System: Removable pad with felt, rubber and graphite. Independent main motor 11 kW (15 HP). Electronic inverter for variable abrasive belt cutting speed 3 - 17 m/Sec (10 - 55 FPS).Electronic colour 7" Touch Screen control & display. PLC with micro-processor - CP0291. Connection for USB, RS232, Ethernet 10/100/1000. Storage capacity of 100 sanding programs. Command, programming & display of all electronic pad functions.Both heads equipped with: ● Oscillating blower for abrasive belt cleaning. ● Abrasive belt oscillation by means of electronic photocell sensor -- Feed System: ● Vacuum bed assembly for holding of small pieces. Including 2,2 kW (3 HP) fan, inverter controlled, mounted in machine frame. ● Motorized table lifting including fine adjustment, on 4 precision screws. ● Natural rubber conveyor belt, machined. ● Feed belt centering by means of conical rollers. ● Electronic digital display for working thickness; resolution 0.1 mm (0.004"). ● Idle table rollers support in infeed and outfeed. ● Blowers for panel cleaning at outfeed. ● Rubber covered presser rollers, grooved. -- Centralized Control Cabinet: ● Analog ammeter on main control cabinet. ● Table lifting-lowering thickness system electrically controlled. ● AUTOMATIC star/delta starter on abrasive belts motors. ● IP 54 protection Against dust & moisture. -- Centralized independent pneumatic control cabinet: ● Pneumatic air filter with automatic water-drain system. ● Pneumatic adjustment for "Grit set system". ● Pneumatic plant working without lubrication. ● Compressed air pressure 6 bar (85 PSI). -- Options included: ● Independent motors. ● Segmented pad with infeed reading barrier. ● 7” control unit. ● On/
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348