• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
6 Results Found for Pellet Mill Viewing 1 - 6 of 6 results
STANDARD LISTINGS
Complete Wood Pellet Plant with a capacity of 1.5 - 4 Tons/Hr (currently 1.5 TPH). - The plant is comprised of the following major components: -- Small Feeding Hammer Mill Bin. --SPROUT Hammer Mill with Magnet. --JACOBSON Hammer Mill Model 2424. --2,000 CFM Fan system. --60" Dia. High Efficiency Cyclone. --AGET Secondary Filter Receiver. --(1) SPROUT 16" die diameter Model "501HL", V-Belt Pellet Mill with feeder-conditioner. --5 TPH Vertical Pellet Cooler with Fan and Cyclone assembly. --Bucket elevator: 7" x 4" x 30' High. --Finished product storage bin with 15-Ton capacity and 14" x 30' inclined and cleated belt conveyor. --ROTEX Model 42, 40" x 84" double deck screener. --Small Rotary Screener. --Raw sawdust surge bin with chain conveyor. --40' Split-casing drag-chain hammermill infeed conveyor. --Electrical Panel (see note below). -- NOTES: ● This system was installed with rebuilt equipment in 2008 and operated for only (18) months. The one pellet mill is rated for 1.5 tons per hour on wood. The remainder of the plant will handle up to 4+ tons per hour. Thus, other pellet mills can be added. ● No dryer system included. ● No bagging equipment included. ● No electrical controls included.
Equipment Location:MID ATLANTIC
Bill Christoffersen
800-374-5009 ext:365
SPROUT, Model 21V-200-3, REFURBISHED Pellet Mill designed for a 21"dia. x 4" die (narrow die arrangement) (die Not included) complete with 3-Roller Assembly, a 18 x 54-SD Feeder-Conditioner and a Door-mounted Centri-Feeder (Force Feeder for wood). -- The refurbishing includes the following:• New (17) Belts.• Refurbished Main Shaft.• Rebuilt Quill.• New Roller Shell Assemblies.• New Seals & Bearings.• Stainless Steel Door-liner.• Includes Shear Pin Housing.• New 200 HP - 1200 RPM 449T frame Motor . (Canadian or USA Voltage - Your Choice)• Replaced or repaired any worn parts as needed.• Prime and paint (choice of stock color). -- Capacity for wood pellet manufacturing: approximately 2 TPH.
Equipment Location:EASTERN CDN
Bill Christoffersen
800-374-5009 ext:365
SPROUT Model 21V-200-3 reconditioned Pellet Mill designed for a 21"dia. x 4" narrow width die (die Not included) complete with the following features and components: -- 18 x 54-SD Feeder-Conditioner. -- Door Centri-Feeder (Wood Force Feeder). -- 3-Roll configuration. -- Premium reconditioning includes (other levels Available): ● (17) New V-Belts. ● Refurbished main shaft. ● Rebuilt quill. ● New roll shell assemblies. ● New seals & bearings. ● Stainless Steel Door Liner. ● Includes Shear Pin Housing. ● New NAE 200 HP, 1200 RPM, 449T Frame Motor. (Canadian or USA Voltage) ● Replace or repair any worn parts as needed. ● Prime and paint (choice of stock color). -- Notes: ● Die not included. ● Allow 8 weeks for reconditioning except by agreed-to faster service.
Equipment Location:GREAT PLAINS
Bill Christoffersen
800-374-5009 ext:365
Rebuilt SPROUT 501-D Pellet Mill System with Cooler and Hammer Mill;Complete with the following additional items: -- 100 HP Main Drive Motor. -- New stainless steel Die for 3/8" pellets. -- New Drive Belt. -- Updated Feeder. -- Approximately 300 operating hours since rebuilt. -- Pellet Cooler with a capacity of (3) tons per hour. -- GRUNDLER Hammer Mill with 150 HP Drive Motor.NOTES: This model pellet mill is a animal feed type machine. Although in great condition, the pellet cooler and hammer mill have not been rebuilt.
Equipment Location:NORTHWEST
Bill Christoffersen
800-374-5009 ext:365

Sprout 501-H Pellet Mill

Call for Price
SPROUT Model 501H Pellet Mill with V-Belt Drive and the following additional features and components: -- 150 HP, 1200 RPM Main Motor. -- 14-groove, 42" Sheave for narrow Die. -- Top Mounted Feeder/Conditioner. -- New Roller Shells. -- OPTIONAL ITEM: New Centri-Feeder for Wood Applications - Add $5,000. -- This machine has not yet been reconditioned. Check with the Product Manager for lead times near the time of purchase. Current lead time is 5 to 8 weeks. -- Photos shown with this listing are representative only. --
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365
1 Ton per hour Wood Pellet Plant complete with and the following features and components: --Mixing Feed Bin with GAYLORD Dumper: -- 5’ X 6’ X 4’ Stainless Steel Bin with 6” Dia. discharge bottom Feed Screw and (3) internal rotating Paddle Bars Delumper. -- Feed Screw and Paddle Bars Delumper, each with its own VFD Drive connected to the Operator Terminal. -- New Hydraulic Ram Control for the GAYLORD Dumper mechanism having operated less than 50 times. Pellet Feeder Conveyor line: -- Dumper Bin 18’ long discharge Conveyor moves furnish product to bin on top of the Pellet Mill with (3) separate Magnet Traps. -- The conveyor feeds to small 2’ X 2’ Surge Bin with bottom Airlock discharge. Conditioner & Pellet Mill: -- 18” x 54” SD SPROUT Conditioner mounted on Pellet Mill. -- 501-HL SPROUT Pellet Mill with Door mounted Force Feeder for wood applications. -- The Pellet Mill is in excellent condition with all the Bearings/Seals recently replaced and a new 125 HP - 460/3/60 main drive Motor. (Model 501H accepts up to 150 HP main drive.) -- Spare parts such as extra sets of Roll and Dies. Hot Pellet Bucket Elevator: -- 16” X 20” X 22’ high. Pellet Cooler: -- SPROUT Model 9-375 Vertical Cooler a 42” Fan and 30 HP Motor. Pellet Fine Screener: -- No nameplate on the Screener Tumbler but it is in great shape and works flawlessly. Complete with a secondary air draw from the Cooler Fan to eliminate dust. Bucket Elevator and Pellet Silo: -- 8’ x 8’ x 20’ Galvanized Pellet Silo for finished product. Controls & Starters: -- All 460/3/60 controls and starters are Included. NOTES: ● No dryer. ● Disassembled, stored and ready to load. ● Price includes loading onto your trucks.
Equipment Location:MID ATLANTIC
Bill Christoffersen
800-374-5009 ext:365