Sawmill Equipment For Sale

Band Mills (Wide) (45) Band Mills (Thin Kerf) (71) Debarkers (80) Edger-Boards (65) Forklifts (59) Gang Saws (52) Hogs and Wood Grinders (222) Portable Sawmills (31) Resaws-Band (168) Scragg Mills (36) Trim Saws (77) Unscramblers (31) Wheel Loaders (78) Wood Chippers - Stationary (153)
Air Compressors (157) Airlocks (23) Banding-Strapping Machines (173) Blowers and Fans (139) Boilers (26) Bolter Saws (1) Carriages (Sawmill) (30) Carriage Drives (Sawmill) (58) Chip Bins (17) Chip Cyclones (26) Chip Screens (38) Chipping Canters (3) Chop Saws (63) Circular Saw Husks (7) Circular Sawmills (90) Conveyors (86) Conveyors Board Dealing (80) Conveyors Deck (Log Lumber) (211) Conveyors General (26) Conveyors-Auger (5) Conveyors-Live Floor (10) Conveyors-Run-Around (4) Conveyors-Vibrating (46) Conveyors Belts (197) Conveyors-Barn Sweep (22) Conveyors-Live Roll (113) Dip Tanks (6) Drills Single-Multiple (1) Drum Dryers (16) Dry Kilns (46) Dump Hoppers (9) Dust Collection Systems (270) Edger Tailing Devices (5) Edgers-Gang (41) Edgers-Slab (6) Edgers-Vertical (6) Electrical (170) Gang Rip Saws (115) GenSets (40) Hammer Mills (14) Hydraulic Power Packs (94) Knife Grinders (39) Laser Lights (7) Log Home Machinery (15) Log Merchandising Systems (14) Log Turners (Sawmill) (38) Lumber Carts (18) Lumber Sorters (7) Lumber Stackers (24) Lumber Stickers (1) Mat Equipment (2) Metal Detectors (35) Misc (100) Operator Cabs (34) Package Saws (2) Parts and Parts Machines (9) Post and Pole Peelers (22) Power Units-Engines (6) Radial Arm Saws (31) Resaws-Circular (3) Scanning Systems (1) Scissor Lifts (54) Screening Systems (10) Setworks - Sawmill (6) Shapers (1) Sharpening Equipment (110) Shavings Baggers (1) Shavings Mills (23) Slab Saws (10) Stake Pointers (4) Step Feeders (3) Straight Line Rips (1) Tilt Hoists (17) Wrap and Packaging (5)

Filtering

Reset All 

thru
 Used     New
Viewing Page 3 of 193
3854 Results Found
Sort By 
Recently Added Items
Corothers
Call For Price
Corothers
Nyle Systems L200M
Call For Price
Nyle Systems L200M
2008 Vecoplan RG 42/60 XL Grinder
Call For Price
2008 Vecoplan RG 42/60 XL Grinder
2018 Vollmer
Call For Price
2018 Vollmer
Call for Price

Left Hand Double End Trim Saw

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 3,850

Hippo hammer mill grinder machines rapidly pulverize a wide range of materials from grain, beans, herbs and fibrous roots to minerals, plastics, glass, bone and recyclables. Materials enter the milling chamber and are impacted by hammers rotating at high speed. Size reduction occurs until particles can exit through the holes of a perforated screen covering the discharge. Interchangeable screens offer hole sizes ranging from 0.6mm to 25mm. Milling chambers are constructed of high strength cast iron plates with bolted construction that eliminates common stress points to prevent cracking. After extended use, this method of construction allows fast, easy, on-site replacement of worn parts. Built for the demands of commercial and industrial grinding, Hippo mills are fast, efficient and durable, and their low cost won't break your material processing budget. The Hippo #1 hammer mill is IN STOCK and available with or without a 10HP electric motor and starter or VFD. The motor is either a 220VAC, 60hz, 1-phase heavy duty rated motor or a 208/230/460VAC, 60hz, 3-phase inverter duty rated motor. The enclosed starter is available for 220VAC 1Phase or 208, 230 or 460VAC 3Phase. The VFD is available for a 220VAC 1Phase power input or 208, 230 or 460VAC 3Phase power input. The starter or VFD is pre-wired to the motor but not to the power supply. The VFD can be programmed to reduce the rotor shaft rpm. Slowing the speed of the rotor shaft can increase the likelihood of getting a coarser grind in hemp and other products, while still utilizing the material handling fan to move product from the mill to the material collecting cyclone. Hippo hammer mill grinders feature rigid hammers with reversible, replaceable tips of long wearing, impact and abrasion-resistant Bennox steel. The screen is located in the bottom half of the grinding chamber, covering an arc of about 180°. Milled material is transported from the discharge of the mill by an impeller fan mounted on the drive shaft, and delivered to the cyclone and dust separator. Suction created by the material handling fan aids transport of the product through screen holes. Stock interchangeable screens are available with hole sizes of 0.6, 0.8, 1.0, 1.2, 1.6, 2, 3, 5, 6, 10, 15, 20 and 25mm. The top half of the milling chamber swings open for full access to the hammers and screen, and screens can be changed out in just 30 seconds without tools. To see more information on the Hippo #1 hammer mill, to include specs and output rates, go to the Pleasant Hill Grain Hippo #1 webpage: https://pleasanthillgrain.com/industrial-hemp-grinder-hammer-mill The $3,850 price listed is for the Hippo #1 hammer mill only; no motor, starter, crate fee or freight shipping costs. Call 866-467-6123 for pricing options.

 Hampton, NE
Pleasant Hill Grain
866-467-6123
Call

$ 4,150

Hippo hammer mill grinder machines rapidly pulverize a wide range of materials from grain, beans, herbs and fibrous roots to minerals, plastics, glass, bone and recyclables. Materials enter the milling chamber and are impacted by hammers rotating at high speed. Size reduction occurs until particles can exit through the holes of a perforated screen covering the discharge. Interchangeable screens offer hole sizes ranging from 0.6mm to 25mm. Milling chambers are constructed of high strength cast iron plates with bolted construction that eliminates common stress points to prevent cracking. After extended use, this method of construction allows fast, easy, on-site replacement of worn parts. Built for the demands of commercial and industrial grinding, Hippo mills are fast, efficient and durable, and their low cost won't break your material processing budget. The Hippo #1.5 hammer mill is IN STOCK and available with or without a 15HP electric motor and starter or VFD. The motor is either a 208/230/460VAC, 60hz, 3-phase inverter duty rated motor. The enclosed starter is available for either 208, 230 or 460VAC 3Phase. The VFD is available for either a 220VAC 1Phase input power or a 208, 230 or 460VAC 3Phase power input. The starter or VFD is pre-wired to the motor but not to the power supply. The VFD can be programmed to reduce the rotor shaft rpm. Slowing the speed of the rotor shaft can increase the likelihood of getting a coarser grind in hemp and other products, while still utilizing the material handling fan to move product from the mill to the material collecting cyclone. Hippo hammer mill grinders feature rigid hammers with reversible, replaceable tips of long wearing, impact and abrasion-resistant Bennox steel. The screen is located in the bottom half of the grinding chamber, covering an arc of about 180°. Milled material is transported from the discharge of the mill by an impeller fan mounted on the drive shaft, and delivered to the cyclone and dust separator. Suction created by the material handling fan aids transport of the product through screen holes. Stock interchangeable screens are available with hole sizes of 0.6, 0.8, 1.0, 1.2, 1.6, 2, 3, 5, 6, 10, 15, 20 and 25mm. The top half of the milling chamber swings open for full access to the hammers and screen, and screens can be changed out in just 30 seconds without tools. To see more information on the Hippo #1.5 hammer mill, to include specs and output rates, go to the Pleasant Hill Grain Hippo #1.5 webpage: https://pleasanthillgrain.com/hammer-mill-grinder-hammermills The $4,150 price listed is for the Hippo #1.5 hammer mill only; no motor, starter, crate fee or freight shipping costs. Call 866-467-6123 for pricing options.

 Hampton, NE
Pleasant Hill Grain
866-467-6123
Call

$ 5,700

Hippo hammer mill grinder machines rapidly pulverize a wide range of materials from grain, beans, herbs and fibrous roots to minerals, plastics, glass, bone and recyclables. Materials enter the milling chamber and are impacted by hammers rotating at high speed. Size reduction occurs until particles can exit through the holes of a perforated screen covering the discharge. Interchangeable screens offer hole sizes ranging from 0.6mm to 25mm. Milling chambers are constructed of high strength cast iron plates with bolted construction that eliminates common stress points to prevent cracking. After extended use, this method of construction allows fast, easy, on-site replacement of worn parts. Built for the demands of commercial and industrial grinding, Hippo mills are fast, efficient and durable, and their low cost won't break your material processing budget. The Hippo #47 hammer mill is IN STOCK and available with or without a 25HP electric motor and starter or VFD. The motor is a 208/230/460VAC, 60hz, 3-phase inverter duty rated motor. The enclosed starter is available for either 208, 230 or 460VAC 3Phase power input. The VFD is available for either a 208, 230 or 460VAC 3Phase power input. The starter or VFD is NOT pre-wired to the motor or to the power supply. The VFD can be programmed to reduce the rotor shaft rpm. Slowing the speed of the rotor shaft can increase the likelihood of getting a coarser grind in hemp and other products, while still utilizing the material handling fan to move product from the mill to the material collecting cyclone. Hippo hammer mill grinders feature rigid hammers with reversible, replaceable tips of long wearing, impact and abrasion-resistant Bennox steel. The screen is located in the bottom half of the grinding chamber, covering an arc of about 180°. Milled material is transported from the discharge of the mill by an impeller fan mounted on the drive shaft, and delivered to the cyclone and dust separator. Suction created by the material handling fan aids transport of the product through screen holes. Stock interchangeable screens are available with hole sizes of 0.6, 0.8, 1.0, 1.2, 1.6, 2, 3, 5, 6, 10, 15, 20 and 25mm. The top half of the milling chamber swings open for full access to the hammers and screen, and screens can be changed out in just 30 seconds without tools. To see more information on the Hippo #47 hammer mill, to include specs and output rates, go to the Pleasant Hill Grain Hippo #47 webpage: https://pleasanthillgrain.com/hammer-milling-machine-grain-spices-herbs The $5,700 price listed is for the Hippo #47 hammer mill only; no motor, starter, crate fee or freight shipping costs. Call 866-467-6123 for pricing options.

 Hampton, NE
Pleasant Hill Grain
866-467-6123
Call

$ 6,700

Hippo hammer mill grinder machines rapidly pulverize a wide range of materials from grain, beans, herbs and fibrous roots to minerals, plastics, glass, bone and recyclables. Materials enter the milling chamber and are impacted by hammers rotating at high speed. Size reduction occurs until particles can exit through the holes of a perforated screen covering the discharge. Interchangeable screens offer hole sizes ranging from 0.6mm to 25mm. Milling chambers are constructed of high strength cast iron plates with bolted construction that eliminates common stress points to prevent cracking. After extended use, this method of construction allows fast, easy, on-site replacement of worn parts. Built for the demands of commercial and industrial grinding, Hippo mills are fast, efficient and durable, and their low cost won't break your material processing budget. The Hippo #57 hammer mill is IN STOCK and available with or without a 40HP electric motor and starter or VFD. The motor is a 208/230/460VAC, 60hz, 3-phase inverter duty rated motor. The enclosed starter is available for either 208, 230 or 460VAC 3Phase power input. The VFD is available for either a 208, 230 or 460VAC 3Phase power input. The starter or VFD is NOT pre-wired to the motor or to the power supply. The VFD can be programmed to reduce the rotor shaft rpm. Slowing the speed of the rotor shaft can increase the likelihood of getting a coarser grind in hemp and other products, while still utilizing the material handling fan to move product from the mill to the material collecting cyclone. Hippo hammer mill grinders feature rigid hammers with reversible, replaceable tips of long wearing, impact and abrasion-resistant Bennox steel. The screen is located in the bottom half of the grinding chamber, covering an arc of about 180°. Milled material is transported from the discharge of the mill by an impeller fan mounted on the drive shaft, and delivered to the cyclone and dust separator. Suction created by the material handling fan aids transport of the product through screen holes. Stock interchangeable screens are available with hole sizes of 0.6, 0.8, 1.0, 1.2, 1.6, 2, 3, 5, 6, 10, 15, 20 and 25mm. The top half of the milling chamber swings open for full access to the hammers and screen, and screens can be changed out in just 30 seconds without tools. To see more information on the Hippo #57 hammer mill, to include specs and output rates, go to the Pleasant Hill Grain Hippo #57 webpage: https://pleasanthillgrain.com/commercial-hammer-mill-for-sale The $6,700 price listed is for the Hippo #57 hammer mill only; no motor, starter, crate fee or freight shipping costs. Call 866-467-6123 for pricing options.

 Hampton, NE
Pleasant Hill Grain
866-467-6123
Call

Call for Price

(4) 200 HP High RPM Motors Your Choice or take all Four. Look at Tags

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Several C-Faced Motor & Gear Reduction Box Drives

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 30,000

2011 AccuCut Edger NEVER USED, 4 cylinder Deutz diesel, 2011, cutting capacity 9"x 30"wide, 20" blades, a sawdust blower, the unit has it's own hydraulic system. Can be financed with proper credit! Here is a heavy edger NEVER USED. Call 937-386-2382 for more info.

 West Union, OH
Showcase Equipment
260-250-4645
Call

$ 11,500

Remote Gas Honda Power—No Electric Needed. Coupler, Counterbore, and drill not included@ this price additional $1,450.00 for a ready to drill machine - Call Jeff for more info at 574-370-5050

 White Pigeon, MI
Jeff Miller Inc.
574-370-5050
Call

$ 4,200

NEW Accuracut Band Saw Guide Dresser - Safer and More Accurate! 4" to 14" - 110 Bosch, $3,900. 20V Dewalt, $4,250. 20V Milwaukee, $4,800 - no batteries or chargers included - Call Jeff for more info at 574-370-5050

 White Pigeon, MI
Jeff Miller Inc.
574-370-5050
Call

Call for Price

Call for Price

ACME 150 KVA Transformer

 Lafayette, AL
Abneyco Equipment LLC
706-590-3624
Call

Call for Price

Acme Carbide Saw Grinder

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

75 KVA 480 volt to 240 volt

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 48,500

ACROWOOD 8' x 12' High Volume Chip Screen;Complete with the following features: -- Dual Drive, --Suspended, --The latest design screen. --Makes 3 separations. --Top screen is 2” square hole, bottom screen is ¼” round hole. --Was running fine when removed from service. --Price shown includes shop going through the machine to inspect, complete any needed repairs, test, clean and paint prior to shipping. Freight dimensions: 10’7” wide x 18’ long x 6’ high. Total weight is approximately 10,000 Lbs.

EX-FACTORY INC.
704-841-2001
Call

Call for Price

10' x 12' Chip Screen 1 5/8" x 1 5/8" Top Screen And 1/4" Bottom Screen

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Acrowood Mdl CHIPR 6K Chipper S/N CHPR001

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Acrowood 8 x 12 High Volume Chip Screen

 Waverly Hall, GA
Ben Jones Machinery
706-324-2604
Call

Call for Price

Good Used Acrowood 8424-6K Slant disc chipper w/ drive

 Talladega, AL
Woodland Parts & Service Inc
256-362-5097
Call

Call for Price

ACT 4-16 Cartridge Dust Collector Cartridge style downward flow dust collector rated at 8,000 CFM. Specifications: -- 20 HP Direct drive, top mounter blower rated at 8,000 CFM @ 10" w.c. -- (16) Nano Elite, flame-retardant, Nano-Fiber merv 15, cartridge filters with up to 4,064 sq. ft. of filter media that are 99.9% efficient. -- Pulse control timer board with built-in digital pressure gauge. -- Drum lid with latch kit, quick-lock easy-access filter doors. -- Magnetic motor starter.Equipped with: -- Automatic reverse jet cleaning via compressed air, (1) pulse valve per (2) cartridges for a total of (8) pulse valves. Goyen diaphragm and solenoid valves -- Heavy Duty steel legs position unit approximately 4' above the ground made with 7 and 10-gauge construction. Options: -- Fan outlet damper. -- Fan outlet silencer. -- All in one - Starter / disconnect / timer board / pressure gauge Other models available, please check with the Product Manager10 year workmanship and materials warranty -- Made in the USA

Bernie Straple
800-374-5009 ext:339
Call

Call for Price

ACT 3-6 Cartridge Dust Collector Cartridge style downward flow dust collector rated at 4,000 CFM. Specifications: -- Blower, 10 HP rated at 4,000 CFM @ 10" w.c. -- Holds (6) Nano Elite, merv 15, cartridge filters with up to 1,524 sq. ft. of filter media that are 99.9% efficient. -- Pulse control timer board with built-in digital pressure gauge. -- Drum lid with latch kit, quick-lock easy-access filter doors. -- Magnetic motor starter panel. -- (6) Filter Upgrade to ACT Nano-Elite, flame-retardant, Nano-Fiber media with industry best Merv 15 efficiencyEquipped with: -- Pulse control timer board with built-in digital pressure gauge. -- Automatic reverse jet cleaning via compressed air, (1) pulse valve per (2) cartridges for a total of (3) pulse valves. Goyen solenoids and diaphragm. -- Heavy Duty steel legs position unit approximately 4' above the ground made with 7 and 10-gauge construction. -- 12" in-letOptions: -- Fan outlet silencer. 10 year manufactures materials and craftsmanship warranty . Made in the USA

Bernie Straple
800-374-5009 ext:339
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved