You Have Selected

 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
2517 Results Found for Sawmill Viewing 1 - 20 of 2517 results
RECENTLY ADDED
PREMIUM LISTINGS

Amidon Circular Sawmill

Call for Price
Amidon handset circular sawmill 52" saw inserted tooth 14' carrier Feed set-up to be P.T.O driven Mounted on portable trailer frame with 3 strand live deck and stop & load.
Equipment Location:Brooklyn, CT
Sigfridson Wood Products
860-774-2075

Cardinal Circular Sawmill

Call for Price
COMPLETE SAW MILL CARDINAL - SWP complete semi-automatic saw mill consisting of 3-strand log in-feed chain deck; 2-strand chain seperator table; de-barker in-feed chain conveyor, MORBARK rosser head type 60 HP de-barker; c/w out-feed chain conveyor with hydraulic log tipper; 3-strand mill in-feed chain conveyor; CARNIDAL incline separator; CUT-CO 36"twin saw with twin overhead blades; cobination single cant twin slab carrier with manual refuse station; CARNIDAL incline slab de-scrambler; re-saw/grading in-feed roll conveyor; CARDNIAL 689C 42" slab re-saw automatic saw with MUDATA PLC control; 6-strand edger in-feed table; 7-strand re-saw out-feed table; CARDINAL 4-strand finished lumber out-feed table; CARDINAL incline de-scrambler; CANADIAN TRIM double end precision cut to length saw; 6-strand trim saw transfer table; waste/scrap recovery system. HAS THE CAPACITY TO SAW 40,000 BD FT OF 8 FT CEDAR IN 8 HOURS LOCATED IN ARTHURETTE, NB. COMPLETE SAW SHARPENING SYSTEMS INCLUDED. MILL COMES WITH 46 ACRES OF LAND.
Equipment Location:Moncton, NB
Graystone Quarries
506-961-2445
What a gem for sale! This machine has only been in production about a year. Customer looking to go a different direction. This machine incorporates Cooper's high production Skewing Overhead and MIT 10 inch Band Saw and added Key Knife Chipping Heads (not included in the sale, but can be added) to make quite the machine. This machine can cut hardwoods or softwoods from 5" up to 28" in diameter and from 8-12' in length. This machine has our skewing centering system with independent log positioners, ultrasonic sensors for diameter readings of the logs for autoset with manual override, and skewing log turners. There are two wide cant supports (one before and one after the chipping heads). A MIT Twin Band with 63 inch diameter wheels and 10 inch bands were used on this machine. Outfeed consists of 8 inch center beam cant guide with two 22 inch wide belt conveyors. Comes with hydraulics, power unit, a 8 x 8 foot cab, four camera color monitoring system, computer and graphic display. Lewis Controls Simple Setworks or 3D scanning can easily be added to this system. System can also be stretched to do up to 16 with some additional work. This machine will be available after March 24th. Machine is available for viewing while in production over the next few weeks. Customer is currently averaging around 50,000bf per day using smaller logs. Machine will be coming back to Cooper Machine for us to go over before resell and we will be offering a "like new" six month warranty on the machine after this. Give us a call for more information and price. Video taken when it was first starting up.
Equipment Location:Wadley, GA
Cooper Machine Company, Inc.
478-252-5885
Complete OPeration FOr Sale!! 2008 Helle Circular Mill w/Cab & Log Turn, Chain Type & On Board, Stop & Unloader, 60 HP Carriage Drive, Husk, 6 Spare 54” Saw Blades, Modular Track Frame. 3HB Carriage, Cab, 3 Saw Vertical Edger, Helle Total Tech Setworks, Modular heavy duty frame. Just unbolt & move, 2 Saw Helle Trimmer w/Waste Belt, Helle Collector Table, Helle Green Chain & Off Bearer Belt, 742 Precision Hydraulic Debarker w/Cab, All in Excellent Condition, Running Till June. Complete Package $105,000 May be Open to Offers to Separate Equipment. 705-386-1750 Precision 5 X 5 Chip Screen & Cyclone Like New Condition $5,000
Equipment Location:South River, ON
Almaguin Forest Products
705-386-1750
Kasco Saw IIB w/Electric Carriage, Briggs Vanguard Saw, 30" Log Cap., Briggs & Stratton Hydraulic Log Deck, Log Turner, Extra Bands, Good Condition $8,000 423-507-4404
Equipment Location:Riceville, TN
Cascade Equipment Company
423-507-4404
Used Linden double acting step feeder(s), Linden 4-36-50 log step feeder, serial# 98-1151 and 1152, 4 steps, 36" stroke, 50 degree angle, 25 hp electric motor belt driven to SM Cyclo reducer drive, approximately 4ft elevation gain, each box is 24" wide and is referred to "narrow box version" and has maximum contact on logs, 22 boxes wide, log length capacity 50ft, factory prints/drawings can be view in photos, Step feeder can be used as 2 individual 25ft long feeders and is priced at per 25ft section- 2 total section available - both run independently and has a electric motor and gear reducer for each section, estimated weight of each 25ft section is approximately 50,000 LBS or 100,000LBS for the total 50ft section. All information is from Linden MFG and we have a copy of the original drawings available, Step feeders are stored in our yard and ready for prompt shipment. Price includes loading onto truck, we can also quote you a delivered price to your location. YouTube videos of step feeder before it was dismantled: https://youtu.be/r-4vExQlDQM , https://youtu.be/uQ4pI19p9t8 , https://youtu.be/HziXK2CtgsI , https://youtu.be/pk8iqnsIB78 , https://youtu.be/MidD6aN8Zmw
Equipment Location:Toledo, WA
Machinery Scene
360-864-2800
• McDonough 54" Vertical Resaw with rebuilt material handling • 110 HP Motor • 14' 4-Strand Tilt Hoist • 30' Rollcase- • 8-Strand Transfer Chain
Equipment Location:Redding, CA
Sell Lumber Co
530-241-2085
New Morbark 58" Chip Pack w/20' Vibrating Conveyor, 100 HP, 480 Volt, 3 Knife Chipper $92,500 920-371-0760
Equipment Location:Crivitz, WI
Timber Milling and Kiln, LLC
920-371-0760
Nelmor S6805 Slow Speed Grinder w/Motor & Gear Reducer, Used Very little, Top Feed & Bottom Discharge. Would be great for reducing wood scraps or recycled materials that need to be reduced to a consistent form. $20,000 obo
Equipment Location:Pray, MT
Ed Davis
406-600-5795

Nicholson A6 Debarker

Call for Price
Nicholson A6 36" Debarker
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
1992 Nicholson 104" Whole Tree Chipper, 10 Knife, Serial # N3052R 1250HP Motor with Starter and Infeed. The maximum log diameter which can be fed into the spout is 25”. The diameter of the shaft at the rear float bearing is 9-1/2". The last 12” of the shaft is tapered from 9-1/2” to 8-1/4”. Nicholson Chipper Line has been taken over by Kadant Carmanah Design.
Equipment Location:Forks, WA
LPS Equipment & Acquisition Co.
731-986-4351
RAWLINGS MANUFACTURING WASTE WOOD GRINDER. IN STOCK, MANY SIZES AVAILABLE, WEAR PARTS AVAILABLE FOR RETRO FITTING YOUR HOG. CALL 406-728-6182 FOR DETAILS.
Equipment Location:Missoula, MT
Rawlings Manufacturing, Inc.
406-728-6182
COMPLETE "LIKE NEW" RECKART 16 X 16 GRADE RESAW W/CANT FLIPPER 5 WAY TRANSFER OUTFEED DECK W/PLC CONTROLS SAW CAB & 40HP
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Good condition, low hour machine, still in use. 150 HP 3 phase motor runs grinder. The grinder is fed in our operation by an HMC debarker and has had an easy life. It is inside a building and has been for its entire life. Looks great, runs great and will make someone a good piece of equipment for a long time. Rotochopper has been a great company to deal with on parts/questions etc. We have simply invested in a larger machine as our operation has grown and changed. Machine is still in use, come see it run today!
Equipment Location:Russiaville, IN
Hollingsworth Lumber
765-883-5836
2005 Salsco 30 Shavings Mill, Demo Unit, 5,000hrs., JD 4059T engine, in perfect shape, $22,000 OBO – 757-371-6905
Equipment Location:Zuni, VA
Campbell Timber Inc.
757-371-6905
2009 Salsco 30" cutter head, 8' box, 92hp CAT engine, 3008 hrs, runs great, approx. 14yds per hour, $25,000 obo Pine Grove, PA. 570-497-0307 Engine serviced regularly.
Equipment Location:Pine Grove, PA
High's Wood Shavings
570-497-0307
Schutte-Buffalo 1320 w/ 50HP Leeson motor, good shape, $8500 570-539-2063
Equipment Location:Mt Pleasant Mills, AL
Alderfer Lumber Company Inc
570-539-2063
Shop Built Hydraulic Scragg Mill, 36" Blade w/ Infeed $15,000 417-754-1173
Equipment Location:Dunnegan, MO
A & M Sawmill
417-754-1173
Two (2) 40' long Tyrone hydraulic shotgun cylinders. Taken out of service 1/2/17. Replaced with two 50' cylinders. Cylinders are in good operating condition Total price - $10,000 FOB Wallingford, KY - Contact Carl Park
Equipment Location:Wallingford, KY
Mellott Manufacturing Co., Inc.
717-369-3125
40’ 3 Strand Log Deck w/Stop & Load, Good Condition $11,500 231-832-2066
Equipment Location:Reed City, MI
County Line hardwoods
231-832-2066