• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
26 Results Found for Scragg Mill Viewing 1 - 20 of 26 results
PREMIUM LISTINGS
Used Overhead Scragg Available in One Week! Currently located in North GA. Existing machine being removed to accommodate a new Cooper Overhead. This would be a great starter saw or for someone looking to add more production or versatility to their carriage mill. This is a right hand feed machine. Comes with two – 48” diameter saws. This machine has a dropped outfeed [5” lower than standard] with 78 chain. Two 125HP motors. Cant Support. One 2.50X10.00 air cylinder. Temposonic #2 with 8” stroke. Hand Valve. Hydraulic Power Unit with one 30HP motor. 5/ x 6’ Sawyer’s cab. Cooper EC-110 Computer system. 2 x 2 x 3/8 Angle iron track. Machine can be viewed onsite running. Call for more information!
Equipment Location:North Georgia, GA
Cooper Machine Company, Inc.
478-252-5885
Shop Built Hydraulic Scragg Mill, 36" Blade w/ Infeed $15,000 417-754-1173
Equipment Location:Dunnegan, MO
A & M Sawmill
417-754-1173
STANDARD LISTINGS
Cooper End Dogging Scragg Mill with 48" Diameter Blades & 125HP Motors. Out and ready to go.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
What a gem for sale! This machine has only been in production about a year. Customer looking to go a different direction. This machine incorporates Cooper's high production Skewing Overhead and MIT 10 inch Band Saw and added Key Knife Chipping Heads (not included in the sale, but can be added) to make quite the machine. This machine can cut hardwoods or softwoods from 5" up to 28" in diameter and from 8-12' in length. This machine has our skewing centering system with independent log positioners, ultrasonic sensors for diameter readings of the logs for autoset with manual override, and skewing log turners. There are two wide cant supports (one before and one after the chipping heads). A MIT Twin Band with 63 inch diameter wheels and 10 inch bands were used on this machine. Outfeed consists of 8 inch center beam cant guide with two 22 inch wide belt conveyors. Comes with hydraulics, power unit, a 8 x 8 foot cab, four camera color monitoring system, computer and graphic display. Lewis Controls Simple Setworks or 3D scanning can easily be added to this system. System can also be stretched to do up to 16 with some additional work. This machine will be available after March 24th. Machine is available for viewing while in production over the next few weeks. Customer is currently averaging around 50,000bf per day using smaller logs. Machine will be coming back to Cooper Machine for us to go over before resell and we will be offering a "like new" six month warranty on the machine after this. Give us a call for more information and price. Video taken when it was first starting up.
Equipment Location:Wadley, GA
Cooper Machine Company, Inc.
478-252-5885
This used Used Cooper Overhead was received in on trade. Carriage has been removed now to help save on shipping since carriage was non-repairable. This machine could easily be turned into a Sharp Chain for someone looking to get into the sawmill or pallet business. We have a husk frame, log turner and power unit for this machine. When it's converted to a Sharp Chain you can run shorter or longer logs on it. Will cut up to 24" in diameter. This is priced ready to move. Comes with used 5 x 5 cab (see attached pictures). Being sold as-is. Machine can be sandblasted and painted for an additional charge. We also have a new cab that is available for an additional charge. We can also supply a parts package to get the machine changed over to a Sharp Chain. For more information please call Frances at 478-252-5885.
Equipment Location:Wadley, GA
Cooper Machine Company, Inc.
478-252-5885
This is a great Overhead that was built in 1986 but rebuilt in December 2009. It has 48" circle saws with 100H.P. Motors! She will cut 8'-16' material down to a minimum of a 3 7/8'' x 3 7/8'' Cant. Equipped with the EC-110 Computer system for setworks and centering with profiling capabilities using 3 independant log positioners! The outfeed consists of an 8'' H-Beam cant guide with 78 chain and (2) 18'' independant slab belts controlled by our computer! Call or Message for more Details or Questions-Thank You
Equipment Location:NC
Cooper Machine Company, Inc.
478-252-5885

Cornell Scragg Mill

Call for Price
Infeed and Outfeed Positioning Rolls CAD Setworks with 16-sets Log Deck Sharp Chain
Equipment Location:MO
Carolina Machinery Sales, Inc
704-288-1904
Cornell Scragg Mill Sharp Chain SR6-200B-867, S/N SR6-4-99, 14’ Infeed w/ Turner, 30’ (4) Strand Infeed Log Deck w/ Stop & Load & H-78 Chain,Hydraulic Power Pack System (100 HP), (2) Independent Scragg Saw Section, 75 HP Motors, Steel Plate Outfeed Rollcase with Transfer chain, Includes Controls & Operator’s Cab (Can be sold with Cornell edger), Exclusive Selling Agent "As Is Where Is"
Equipment Location:AL
Kittrell Sawmill Brokers and Appraisers
931-797-6284

Evans Scragg Mill

Call for Price
45" Short Log scragg mill 1st saw: Bottom arbor has (2) 34" blades on a 2 1/8” shaft 50HP motor Top arborhas (2) 18" blades on a 2' shaft 20HP motor Air activaated bottom saw Width setup for 4"-6" Carriage chain: with 3.5" pitch links consisting of dogs spaced at 10" 11" slab conveyor frame on both sides on a 6" belt 2HP motor 2nd saw: 28" blades on aa 2 1/8" 50HP motor Air activated saw dimensions: 4", 6" and 8" Saw line dimensions: 42'L x 40"H x 8'W 8" channel frame and 4" channel legs Max log diameter: 18" Max log length: 48" This was installed new into their facility in the early 80's.... The seller has confirmed tha this Evans Short Log scragg mill is in good working/running condition.
Equipment Location:NS
Carolina Machinery Sales, Inc
704-288-1904
Fastline 4 Side Sharp Chain Scragg 1.5" Band Blades, Infeed Log Deck, Slab Belt, Green Chain all Lazer Lights and Set Works work as they should. Can Run 2" Blades with new Guides. Minimum Foot Print needed for this Set up 80' End to End x 14' Side to Side x 9' Tall.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
(2) 75 HP motors on (2) Circular Saws (2) 20 HP motors on (2) Band Saws 75 HP motor on hydraulic pack 24" Max log diameter Hydraulic feed Electrical Panel 48" blade diameter Minimum 12' from trough to blade
Equipment Location:OK
Carolina Machinery Sales, Inc
704-288-1904
Jackson Overhead Scragg with with 50HP
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Morgan Scragg with 6' End Dogging System, (2) 60HP Electric Motors on Blades and 10HP on the Blower & Infeed Log Deck.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Morgan Mini Scragg Mill

Call for Price
Morgan Mini Scragg with 50HP Motors.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Morgan Mini Sharp Chain Scragg. This can be run with electric or Gas Motor, 10' Between Dogs on the Pull through Chain, Manual Width Setter.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Morgan Scragg Mill

Call for Price
Morgan Sharp chain scragg mill 40" circular insert tooth saws w/ 125HP electric motor w/ soft start and hydraulic drive Cornell Log Merchandiser 42" slasher saw w/ infeed and outfeed Hydraulic log step feeder (3) saw chain feed trim saw 7HP on each saw 2HP drive Cornell double arbor Gangsaw Pineapple feed w/ infeed and outfeed powered rollers Cornell sharp chain slab saw w/ air shifters insert tooth saws Baker Bandsaw resaw 4 cut (2) 40HP electric motors Timberland sidewinder board deduster Bush 48" drop feed disc chipper 30' (2) strand log deck Lots of extra parts and saw blades included No take away belts. Slabs drop on to a crossover belt. This is currently set up for short logs, but if you remove the hold down wheels that he placed on there, you will be able to take a log up to 12'. This would be a great setup for a small diameter log (4" to 12") averaging a log every 5-6 seconds. These folks were averaging 14,000 bdft per shift sawing 5/8 deck boards with a crew of (5). The seller has confirmed that this whole operation was in good working/running condition when pulled from service. It is all packaged and ready to load!
Equipment Location:MN
Carolina Machinery Sales, Inc
704-288-1904

Morgan Scragg Mill

Call for Price
Morgan Sharp chain scragg mill 40" circular insert tooth saws w/ 125HP electric motor w/ soft start and hydraulic drive Cornell Log Merchandiser 42" slasher saw w/ infeed and outfeed Hydraulic log step feeder (3) saw chain feed trim saw 7HP on each saw 2HP drive Cornell double arbor Gangsaw Pineapple feed w/ infeed and outfeed powered rollers Cornell sharp chain slab saw w/ air shifters insert tooth saws Baker Bandsaw resaw 4 cut (2) 40HP electric motors Timberland sidewinder board deduster Bush 48" drop feed disc chipper 30' (2) strand log deck Lots of extra parts and saw blades included No take away belts. Slabs drop on to a crossover belt. This is currently set up for short logs, but if you remove the hold down wheels that he placed on there, you will be able to take a log up to 12'. This would be a great setup for a small diameter log (4" to 12") averaging a log every 5-6 seconds. These folks were averaging 14,000 bdft per shift sawing 5/8 deck boards with a crew of (5). The seller has confirmed that this whole operation was in good working/running condition when pulled from service. It is all packaged and ready to load!
Equipment Location:MN
Carolina Machinery Sales, Inc
704-288-1904
Pendu Model 1800-10 Scragg Mill S/N 99-01, 15HP Motors
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Diamond Twin Scragg makes 4 cuts at once 4- 40HP Saw Motors, Great for making 4" and 6" Posts and Up to 10", will handle up to 30' logs. Trailer Mounted, Portable, Cab slides over to let logs get to log turner
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
PENDU MDL 6800 ENDDOGGING SCRAGG MILL W/(2) 100HP MTRS, Stretched, Excellent for Pine.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351