• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
92 Results Found for Band Resaw Viewing 1 - 20 of 92 results
PREMIUM LISTINGS
G Tek Single Head Grade Band Resaw With Complete Run Around System, Cab and Set works, 5 Way Seperator. Just about the Same as a Brewco B-1600. Additional Pictures available on Request
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
McDonough 62" Horizontal Resaw System Includes Resaw,Cab w/Setworks, Electrical, Complete Runaround Conveyors, Infeeds & Outfeeds, Ready to Run. Set Up for Long Lumber & Bridgemat Production. Where cutting up to 40' Lengths.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Horizontal Band Resaw System, cuts 18” cants x 16’ long W/ 4" band saw, S/N WPRWBS 131, landing & return table, outfeed tailing belt, infeed table, rollcases & operator controls
Equipment Location:Kane, PA
Kittrell Sawmill Brokers and Appraisers
931-797-6284
STANDARD LISTINGS
BAKER A Single-Head Resaw -- Specifications: Max. 7" x 7" timber cap w/Slide Return; hydraulic variable feed speed rate 0 - 120 FPM; 6" Wide rough-top belted infeed conveyor for easy-to-produce lap siding. -- Few moving parts and few adjustments for quick mastery. -- Equipped with: 20 HP Electric motor, 28" dia, CNC machined all wteel band wheels; 1" or 1-1/4" x 13' - 2" x 0.035" hardback band blades; optional Diesel or Gasoline engines available. -- Includes: Operations manual, parts list & tool kit.
Equipment Location:MIDWEST
Jim Reedy
800-374-5009 ext:455
BAKER ABXX 40 HP Resaw, 12" H x 16" WSingle-Head Band Resaw can be used to cut boards, cants, or reclaim slabs, This Resaw can process a Timber up to 12" H x 16 W" in any desired length. Hydraulic variable speed from 0 - 95 FPM. -- This Model "ABXX" Resaw covers a large range of applications from small to large facilities, they are simple to operate and maintain with few moving parts and few adjustments. -- Complete With: 40 HP Electric Motor, 28" all-steel band wheels, 14'10" x 1" x 0.035" band saw blade, BAKER's exclusive Low-Profile Flat Guide System, spring blade tensioning and heavy duty construction. -- Included: Hydraulic infeed hold-down, extra wide hold-down wheel system.
Equipment Location:MIDWEST
Jim Reedy
800-374-5009 ext:455
BAKER BBR-O (AX) Horizontal Band Resaw w/Powered Infeed12" Baker Single Head Re-Saw with 12" wide x 12" high cap.;Specifications: -- 1/4" - 4" Cutting height; 20 HP TEFC saw motor. -- 28" CNC machined dynamically balanced all steel band wheels. Spring blade tensioning system. Feed System: -- Powered infeed belt tilts 0° - 10°, variable speed from 20 - 120 FPM controlled by a hydraulic flow valve. -- Complete with: 12" Wide rough top conveyor belting with powered top hold down; 4" dust outlet (500 CFM). -- Recommended blade (not included): 0.035" x 1" x 14'-2" Hardback.
Equipment Location:MIDWEST
Jim Reedy
800-374-5009 ext:455
Baker BBR-0 6-Head Horizontal Resaw System, 13 Sets of Side Press Rolls, 6" x 35' Feed Through Belt Conveyor, (6) 20 hp, 1750 Rpm Drives, Air Bag Tension, Push Button Control, S/N 95-1486
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Baker 3 Head Band Resaw with Return Model BBR-O, 20HP Electric Motors, S/N 95-1256
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
2-Head, 30 HP TEFC motor, hydraulically driven feed from head motor, feed speed from 20 - 120 FPM, feed works with 12" wide rough top belt conveyor on self-centering rollers, and holddown wheel. -- Mechanical spring blade tensioning, 0.035" x 1" x 13-1/6' blades, 0.072" kerf. -- Baker flat guides for higher production, accuracy & extended blade life.
Equipment Location:MIDWEST
Jim Reedy
800-374-5009 ext:455
Baker C 4 Head Resaw Early to Mid 90s 6" w × 12" h capacity 20hp 3ph 480v motors on resaw heads 10hp 3ph 480v VFD 20-120 fpm Uses 1" × .035 × 13'2" blades Saw is in overall good condition and ready to go to work
Equipment Location:Colorado
Mitch Stevens
828-773-6986
4-Head Re-Saw, each head equipped with a separate 30 HP TEFC motor and 3-sided feed works with: Rough-top belting, powered side feed rollers, non-powered hold-over wheels. -- Fully variable 20 - 120 FPM feed speed. The system is perfectly suited for resawing squares, and 3-sided cants into various thickness of lumber. -- Equipped with: Roughtop conveyor belt, powered side feed rollers, and non-powered holddown wheels, return conveyor, and air blade tensioning. -- Specifications: 12" Cutting height x 12 wide, uses 0.035" x 1" x 13'-2" band blades, creates less 1/16" kerf; 4" diameter, 500 CFM saw dust outlet per head recommended. -- Completely pre-wired with NEMA 12 enclosure with starter, disconnect and overload protection, and start/stop stations. -- Feedworks/Conveyor Hydraulic Motor driven by main motor. -- Features include: Air tensioning system; blade height adjustments can be made quickly via hand crank; Low-profile flat guides for maximum accuracy. 28" Dia. all-steel band wheels, with crown. -- Material is firmly held in place during the entire cut - the only continuous feedworks on the market today!
Equipment Location:MIDWEST
Jim Reedy
800-374-5009 ext:455
Two head Baker resaw w/complete Return, two 15 HP motors on heads, good condition, band wheels recently recrowned
Equipment Location:Hamilton, IN
Bright Star Realty & Auction Company
260-350-8953

Baker 3 Head Band Resaw

Call for Price
3 Head
Equipment Location:VA
Pallet Machinery Group
540-644-9220

Baker 4 Head Band Resaw

Call for Price
4 Head , return belt to go back on it. It would need all new guides for each saw, and 1 motor. Located in Pennsylvania
Equipment Location:VA
Pallet Machinery Group
540-644-9220
Baker single head band resaw w/20 hp. electric motor.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Baker model A resaw, original owner retiring. Comes with at least 90 New not resharpened bands and lots of spare parts. The best one person resaw ever made, still hooked up to power. Wheels where upgraded with bearings and don't need to be crowned. Please email or instant message if possible. [email protected]
Equipment Location:Evart, MI
Industrial Wood Products
989-339-4727
Vertical Band 6 inches blade, wheel 48” diameter Approx. 20 years old
Equipment Location:AB
Pallet Machinery Group
540-644-9220
3head w/ return, Hyd unit, lube system, 40 hp motor on each head, good condition,infeed belt included
Equipment Location:Middlebury, IN
Showcase Equipment
260-214-1481
Brewco 1600 Runaround Resaw w/ New Air Setworks, Like NEW! $55,000
Equipment Location:Shipshewana, IN
Jeff Miller Inc.
574-370-5050
Brewco EZ Cut 2HD Band Resaw w/Return Belt
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351