Planers For Sale

Newman EPR 18 Planer Top & Bottom Planer Manufacturer specs (to be confirmed): Newman Model ERP-18 Double-Roughing Planer 40 HP Top Head 25 HP Bottom Head 18" Wide x 6" Thick Capacity Equipped with Top & Bottom Newman Cutterheads Two 10 HP Feed Motors Variable Speed Feed from 40 - 150 FPM Air-Filled Feed Tires Free-Standing Electrical Cabinet & Operator Control

Newman 500 4 sided Planer in very good condition. New dust hoods. No power but is line shaft or single power hook up. Cap 6" x 14". $13000 for planer only. Does not include knives and heads. Call 800-459-2148 for more info.

NEWMAN S-282 PLANER, 18IN W HELICAL HEAD, DOUBLE ROUGHING, 25HP BTM & 40HP TOP, S/N 14977 W/ WOODLAND 24 IN X 4 Ft Pinch Roller with Cross, Special 15hp Elec Hyd power unit

NEWMAN WHITNEY S-282, 18 " Wide Capacity Top & Bottom PlanerSpecifications: -- Capacity Of Wood 18" Wide X 6" Thick , Can Take Up To 3/8" Off A Board In One Pass -- (3) Driven Pneumatic Tires On The Top Side, Hydraulic Driven -- Top And Bottom Cutter Heads Are QUIETCUT Carbide Spiral -- (1) Large Metal Roller On The Out Feed Side On The Bottom -- Pneumatic Tires On The Top Out Feed Hydraulic Driven -- Top Cutterhead Motor: 40 HP, 230/460V, 3Ph, 60Hz, (3,530 RPM) -- Bottom Cutterhead Motor: 25HP, 230/460V, 3Ph, 60Hz, (3,515 RPM) -- Feed Speed Range: 50 to 150 FPM -- Capacity Of Wood 18" Wide X 6" Thick -- Can Take Up To 3/8" Off A Board In One Pass -- Cutterhead Grinder and Jointer Included?Equipped With & Features: -- Infeed Conveyor is Hydraulic Driven 198" Long X 18.5" Wide -- Push Button Controls -- Hydraulic Pump Unit 15 HP, 230/460V, 3Ph, 60Hz -- Cutterhead Grinder and Jointer Included -- New rubber drive wheels. -- Current Voltage: 480 Volt

NEWMAN WHITNEY S-970 DOUBLE SIDED PLANER WITH "QUIET CUT" HEADS - Hard to find 44” width capacity with 7” thickness capacity - S970-44" SN: 17701 - Built: March 1965. Shipped to: Carolina Panel:Lexington NC - Retrofitted with the Helical cutterheads in April 1993 - Includes grinder (handle was bent in storage but can be easily repaired) and dust hood - One door cover has a crack but it does close without any issues - We purchased this in 2013 and never used it. Was in operation when purchased Call 800-459-2148 for more info.

Newman Planer Heads

Newman Planer Pineapple Infeed

36"width x 8-3/4" thickness cap., 30 HP V-belt drive motor turns NORTHFIELD Helical cutterhead with (4) rows of (29) carbide inserts @ 3,600 RPM, 3/8" max. depth of cut, 12" min. stock length (unbutted), 4" min. stock length (butted). -- Motorized table raises-and-lowers w/digital readout, hand wheel for fine adjustment, 2 HP variable feed speed motor, 20 - 100 FPM, feed speed indicator and reversing safety switch on feed mechanism. -- (4) Powered 4"dia. solid steel feed rollers, 4" dia. sectional infeed roll with (18) 2" ductile iron sections, sectional chipbreaker with (18) 2" ductile iron sections, and 4" dia. solid steel outfeed roller. -- Complete with: Magnetic starter, hand brake, dust hood, electric knife grinding & pressure bar.

NORTHTECH NT-450HC Double Head Surfacing Planer; 18" x 6" Opening, 20 HP top & 15 HP bottom motor.Specifications: -- Motors V-belted to cutter heads at 6,000 RPM, min. stock thickness 1/4". -- Carpet style infeed with nice "pointy" fingers, sectional chipbreaker and chromed tables. -- Equipped with: Spiral carbide insert knife cutterheads with (9) rows of (20) knives per row of 4-sided inserts, each with a slight arch (radius) for better finish work. bearings are "Class 7" NKS brand. -- Feed works: 20 - 90 FPM driven by 3 HP variable speed drive. -- 1 HP motorized thickness adjustment and opening from 0" - 6" opening.

NORTHTECH NT-610EL Top & Bottom Planer:24" Wide x 7.5" thick capacity; 1/4" minimum thickness; 12" minimum stock length.Specifications: -- Cutterheads: 25 HP top head; 20 HP bottom head; 5,800 RPM on cutterheads; (6) row spiral insert cutterheads, Carbide knives 15 mm x 15 mm x 2.5 mm 4-sided -- Feed works: 3 HP variable speed feed with speeds from 20 to 75 FPM; 1 HP motorized raise and lower of bed; DP-525 digital thickness controller; Overhead carpet style feed system Equipped with & Features -- Sectional chip breaker; Hard chrome plated bed; Automatic lubrication for feed system; Amp load meter -- Dust Requirements: 3,800 CFM; (1)10" and (1) 7" dust outlet

NORTHTECH NT 1000-50HCVS Single-Sided 40" PlanerSpecifications: -- 40" Planer, 40 HP main motor, Helical Head, Adjustable bed rollers 15 mm x 15 mm x 2.5 mm Carbide Insert cutters. -- The spiral cutterhead provides a high chip removal rate, superior surface finish and low noise. -- Powerful 40 HP cutterhead motor makes this planer ideal for heavy-duty planing and meets high production requirements. -- Variable feed speed is mechanical variable from 0 - 90 FPM. -- Power elevation of the feed bed with "727 M Digital Table Adjustment" for fast accurate, and convenient thickness setting. -- Extra heavy rib reinforced cast iron table, surface precision ground. Equipped with: -- (4) Powered steel bed rollers. -- (4) Upper rollers. -- (2) Powered corrugated infeed rollers. -- (2) Powered urethane outfeed rollers. -- Upper and lower limit switches for opening control. -- (4) Dual 50 mm jack screws for raise/lower bed movement; 12" max opening. -- 2 HP Elevation motor with manual adjust. -- Rear E-Stop for added safety. -- Dual 6" dust ports requiring 1,000 CFM @ points of extraction.

NORTHTECH - NT 400-XL, ...Double-Sided PlanerSpecifications: -- 16" x 6" Working capacity. -- 25 HP Top & 15 HP Bottom motors, V-belted to cutterheads (draws 70 Amps max.); min. stock thickness of 1/4". -- Equipped with: 6-Row Spiral Carbide insert knife cutterheads with 4-sided Carbide knives. -- Cutterheads: 5,000 RPM. -- Bearings: "Class 7" NKS brand. -- Slip clutch to protect drive chains. -- Feed works: 3 HP motor, 20 - 75 FPM; 1 HP motorized thickness opening from 0" - 6".Equipped with & Features: -- Digital controller thickness control via ball screw; encoder; Model "DP-525" Controller. -- Magnetic push button panel controls operation.NOTE: Planer has less than (300) hours on the clock since new!

NORTHTECH NT 400EL Double Head 16" PlanerHeavy Duty Chain Drive Series Double SurfacerSpecifications: --15 HP Top, 15 HP Bottom Head Motor -- Dual (6) Row Helical Cutterhead with four sided 15 x 15 x 2.5 mm Inserts -- 5,175 RPM solid steel cutterheads with Class 7 NSK bearings -- Cutterhead dimensions: 5” dia. x 16” long -- Operating decibel rating of 79 dbProduct Dimensions: -- Working thickness 10 - 155 mm (3/8” - 6-1/2”) 8 mm min. on request -- 13” Min. working length -- 16” Maximum widthFeed System: -- 3 HP Feed motor -- Carpet feeding spike system with (644) spikes -- Feed speed 25 - 85 FPMFeatures: -- 1 HP Elevation motor -- Mechanical variable speed -- Digital control panel with 3 amp meters -- Chrome bed plate 0.01mm (0.004”) thick -- Passline at 32” -- Amperage requirement: 230V / 115 AMPS, -- (2) 6” Dust ports requiring 981 CFM @ each point of extraction -- Automatic lubricating system with low level shut off -- UL/CE Certified electrical components -- Includes operator’s manual and parts book -- Net weight: 5,990 Lbs -- Machine / Packed weight: 5,990 Lbs / 6,195 Lbs -- Machine/Packed dimensions (L x W x H): 98” x 50” x 70” / 101” x 46” x 80” -- One year parts warrantyNOTE: All machines are tested stateside prior to shipment providing trouble-free start-up.

6” x 24” capacity 2 sided knives on helical cutter head 534 hours in meter

Oliver 30” planer straight knife cutterhead 40 HP motor 220 volt 3 phase Knife sharpener High school shop machine

OLIVER 4430 20" PLANER WITH HELICAL HEAD20" Maximum stock width cap., 1/4" to 8" max. stock thickness, 10" minimum stock length. Equipped with: -- 5 HP Main drive motor and mechanical raising and lowering of the cutter head. -- Fixed bed height of 29-7/8". Table dimensions 20"L X 21"W. Overall all table dimensions with infeed and outfeed bed extensions 51"L X 21"W. -- 3-1/4" Dia. Helical Cutter Head with 4-sided carbide inserts. -- Auto-Depth lock via nitrogen-charged cylinders eliminates snipping. -- 8" Max. thickness adjustment via handwheel includes LED Digital readout for head positioning. -- 4-Post support for proper head alignment.Complete with: -- 5" Dust outlet and built-in mobile base for ease of movement

Oliver 299-D 24" Planer (8" Thickness capacity). . Oliver Model 299 Planer --Capacity: 24" x 8" thickPlanes Stock as Short as 11" --Three knife steel cutter head Motor: --5HP; 3PH --Sectional infeed rolls - Twelve 2" Wide SectionsSectional chipbreaker - -- Twelve 2" Wide Sections with 1/4" Independent Lift --Two driven bed rollsFeed motor: --1HP; 3PH Reeves Variable Speed 15 to 60 f.p.m

OLIVER 15" Planer with Helical Cutterhead - 10014, 3 HP (Single Phase)Unique design allows motor and cutter head to move in unison.Specifications: -- Auto-depth lock features twin nitrogen cylinders virtually eliminates snipping. -- Helical cutter head with premium carbide inserts. -- 4-Sided cutting inserts are indexed and easy to replace. -- Heavy cast iron construction including extension wings. -- Table and extensions wings are precision ground for smooth stock feeding. -- Table is fixed allowing easy use of auxiliary stock support. -- Wixey digital read-out allows precise thickness settings. -- Large handwheel and support struts allow easy height adjustment. -- Four-post design ensures head alignment regardless of stock thickness. -- Two-speed feed gearbox for better cuts, Oil bath gear lubrication for years of performance.Complete with: -- 4” Port allows excellent dust management. -- Built-in mobile base allows easy movement in the shop. -- Magnetic switch for added protection and safety.

OLIVER 16" - 5 HP Planer with Helical Cutterhead - Model 4420Specifications & Features: -- Helical cutter head includes premium carbide inserts. -- Carbide inserts are indexed for quick changing. -- Heavy cast iron construction including extension wings support heavy stock. -- Table and extension wings are precision ground allowing smooth operation. -- Top rollers allow easy return of stock. -- Four-post design ensures table alignment regardless of stock height. -- Large handwheel allows easy height adjustment. -- Serrated steel infeed roller provides smooth feeding. -- A 2-speed gear box provides the perfect feed rate.Equipped with: -- Polished built-in table roller assists movement of rough stock. -- Magnetic controls for safer operation. -- Wixey digital readout allows precise thickness settings. -- Built-in casters with locks for easy mobility. -- 4” Dust chute easily handles chip removal. Matched 3 V-belt drive smoothly transfers power to drive train and cutter head; Powerful TEFC motor.

OLIVER 4470 25" Straight Knife Planer Full 24" of cutting width, over 9" of cutting capacity, and the ability to take up to 1/4" off in a single pass through the 4-knife standard cutter head, this planer will take whatever you can dish out. -- The Digital Thickness Controller and Powered Table Travel eliminate guesswork, make dialing in settings a breeze. But ease of operation isn't everything, this OLIVER outputs stock that's true and straight. -- A Sectional Infeed Roller and Chip Breaker apply uniform pressure on uneven stock, coupled with a Driven Outfeed Roller to keep your stock in place. -- And a powerful 10 HP motor Single Phase motor, or 15 HP 3-Phase motor. --OPTIONAL EQUIPMENT: Byrd Shelix Cutterhead (ADD $2,400)