Woodworking Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 73
1454 Results Found
Sort By 
Recently Added Items
Stenner ST9
Call For Price
Stenner ST9
Pinheiro 630
Call For Price
Pinheiro 630
2005 D M C TOPSAND K TSK 135MS
$51,750
2005 D M C TOPSAND K TSK 135MS
Timesavers 2321-24-01
$21,890
Timesavers 2321-24-01
PREMIUM LISTINGS
2015 Guangzhou Hessan PUR Automatic Floor Laminating Line  Glue Equipment
$75,000

Guangzhou Hessan Woodworking Machinery Co., Ltd, HY-F-350 PUR Automatic Floor Laminating Line, 480 Volts 60Hz 3-Phase Lamination width: upto 350mm Thickness: 3-25mm Speed: 3-10m/min Dimensions: 6.8' High x 5' Wide x 72' Long Machine can laminate up to 17' long

 Hammond, IN
Brenco LLC
312-543-6505
Call

MZ Project Hopper 013  Bandsaw
$9,800

Cuts lengths up to 2,000 mm, max. size workpiece is 2,000 x 1,200 x 100 mm (78.7" x 47.2" x 4"); height of cut is from 0 - 100 mm (0" - 4") - Call for more details and similar equipment

 Jasper, IN
Machine Solutions, LLC
812-639-3527
Call

1985 Weinig U22A  Moulder
$7,500

1985 Weinig U22A Moulder, All Electrical, Just Taken out of Service, Was Working Daily, Delivery Available! $7,500 obo 585-335-5879/585-329-5875

 Dansville, NY
Dansville Logging & Lumber
585-335-5879
Call

Yates A20  Planer
$5,500

Yates A20 8” x 12” Planer, 6 head, motors needed and TLC needed for rebuild or used as parts machine, $5,500 – 719-843-0280

 Antonido, CO
Quality Timbers & Wood Products
719-843-0280
Call

Yates-American A20  Planer
$10,000

Yates A20 8” x 12” Planer, 5 head w/ top bracket, running condition, $10,000 - 719-843-0280

 Antonido, CO
Quality Timbers & Wood Products
719-843-0280
Call

STANDARD LISTINGS
2019 Cam-Wood 620-UB  Jointer and Finger Jointer
$225,000

CAM-WOOD MODEL 620-UB "LONG BOARD" MEDIUM PRODUCTION HORIZONTAL FINGER JOINTER: -- Typical application is for post and beam or laminated beam operations where long lengths are required. -- Up to 12' infeed capacity, unlimited outfeed lengths, and with the following equipment and specifications:CAM-WOOD MODEL HSTC-62AX2 INFEED CONVEYOR (A on Schematic) -- infeed Table size: 24.4’ wide x 12’-4” long -- Working dimensions: 24.4” wide x 12’-1” long -- Feed speed: 115 FPM -- Powered by (2) 2 HP inverter type motors CAM-WOOD MODEL FSR-62I INVERTER TYPE SHAPER SECTION (B on Schematic) -- Working dimensions: 24.4” wide x 6” to 12’ long x 0.06” to 4” thick -- Shaper spindle with 20 HP motor -- Size of cutter head: 50mm Bore x 160mm OD (1-cutterhead included) -- Shaper spindle runs at 5,800 RPM -- 7-1/2 HP Cut-off saw, runs at 4,800 RPM -- Cut-off saw blade dimensions: 10” diameter x 100 tooth (1-blade included) -- 2 HP scoring saw, runs at 2,850 RPM -- Scoring saw blade dimensions: 7” diameter x 60 tooth (1-blade included) -- Conveyer belt powered by a 2 HP -- Table movement powered by a 2 HP motor -- Table movement power, 2 HP motor -- Table cycle speed, 1 to 4 cycles per minute CAM-WOOD MODEL HSTC-62AX2 OUTFEED CONVEYOR (C on Schematic) -- Table size: 24.4’ wide x 12’-4” long -- Working dimensions: 24.4” wide x 12’-1” long -- Feed speed: 115 FPM -- Powered by (2) 2 HP inverter type motorsCAM-WOOD MODEL HSTC-62AX2 INFEED CONVEYOR (N on Schematic) -- Table size: 24.4’ wide x 9’-8” long -- Working dimensions: 24.4” wide x 12’-1” long -- Feed speed: 115 FPM -- Powered by (2) 2 HP inverter type motorsCAM-WOOD MODEL FSL-62I INVERTER TYPE FINGER JOINT SHAPER (D on Schematic) -- Working dimensions: 24.4” wide x 6” to 12’ long x 0.06” to 4” thick -- Shaper spindle with 20 HP motor -- Size of cutter head: 50mm Bore x 160mm OD (1-cutterhead included) -- Shaper spindle runs at 5,800 RPM -- 7-1/2 HP Cut-off saw, runs at 4,800 RPM -- Cut-off saw blade dimensions: 10” diameter x 100 tooth (1-blade included) -- 2 HP scoring saw, runs at 2,850 RPM -- Scoring saw blade dimensions: 7” diameter x 60 tooth (1-blade included) -- Conveyer belt powered by a 2 HP -- Table movement powered by a 2 HP motor -- Table movement power, 2 HP motor -- Table cycle speed, 1 to 4 cycles per minute -- NOTE: Glue application system provided by others such as APQUIP. Buyer to provide glue system of their choice and ship to CAM-WOOD's factory where it is mounted, aligned, and tested prior to shipment. This work is included in the price.CAM-WOOD MODEL HSTC-62BX2 OUTFEED CONVEYOR WITH GLUE CLEANER (E on Schematic) -- Table size: 24.4” wide x 12.4” long -- Working dimension: 24.4” wide x 12.1” long -- Feed speed: 180 FPM -- Feed belt motor with 2

Jeff Terrill
800-374-5009 ext:349
Call

2019 Cam-Wood A-2560  Sander
$9,190

CAM-WOOD A-2560 Single Head, Contact Roll Only Wide Belt Sander;Features & Specifications: -- 24" Width cap. - Contact roll only sanding head with a rubber covered contact roll, 10 HP motor. -- 25" x 60" Abrasive belts, pneumatic abrasive belt tensioning. -- 0" - 5" Feed through bed adjustment, 0.5 HP motor power elevation for thickness opening. -- Variable conveyor feed speed from 17 - 51 FPM, 1 HP feed motor. -- 5" Max. working thickness, 7" min. working length, -- Double Infeed & outfeed spring loaded holddown rolls.Complete with: -- Magnetic controls, 6" dia. dust collection hood, and safety shutoff. - 1,500 CFM Dust collection required. NOTE: Equipped with 10 HP Single Phase motor

Ed Webb
800-374-5009 ext:377
Call

2019 Cam-Wood CS-0040  Shaper
$16,800

CAM-WOOD MODEL CS-0040 40" AUTOMATIC COPY SHAPER -- 3" to 40" shaping capacity; 15" x 35" rectangular capacity; table diameter is 27"; -- 1.5 to 6 RPM table speed; cutterhead speed is 9,000 RPM powered with a 7-1/2 HP motor; 1" dia. x 5-1/2" long spindle accepts up to 6" dia. cutterheads. -- 2" dia. follower wheel and 2 HP feed motor -- All controls are located on the control panel for easier touch up to operation. -- Equipped with PC program control for easy maintenance and durability usage. -- Easy set up at any position, variable speed table makes it possible for the machine to be operated at any cutting speed. -- The variable feed rate can be adjusted to give optimum output according to stock thickness and component shape. -- Unique design of table runs clockwise and counter-clockwise to help eliminate tearout while cutting with or against the direction of grain. -- Advanced timer control of overlap table rotation to eliminate cutter joint mark. -- Cutter head feed is controlled by pneumatic-hydraulic system to smoothly apply even pressure for fast and smooth cutterhead feed. -- Heavy duty motor for maximum cutting capacity. -- Precision sealed long life, high speed bearing for durability usage. -- Heavy sheet metal frame and cast iron table. -- Cutter head feed designed to automatically slow down when approaching to the work piece, assures no bumping to eliminate cutter marks left at the starting point for an exceptionally smooth finish. -- Those models are designed for medium size shaping & profiling. Easy & convenient to operate. -- SETUP KIT, INCLUDES CUTTER & TEMPLATE, ADD $900

Torry Hiddema
800-374-5009 ext:371
Call

2019 Cam-Wood BR-2132  Boring Machine
$5,290

CAM-WOOD BR-2132 Boring MachineAdjustable 21-spindle boring head on 32 mm centers with position indicator.Features & Specifications: -- Stops in 0° & 90° with pneumatically assisted positioning in vertical & horizontal. -- 0" - 3" Adjustable drilling depth with speed control. -- Head height fine adjustment with mechanical digital readout. -- 2 HP - 3,400 RPM Motor. -- Cast iron 37-1/2" x 31-1/2" table with side fences for mirror-image. -- Line boring fence with repeat stops. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection & (1) set of "M10" chucks.

Ed Webb
800-374-5009 ext:377
Call

2019 Cam-Wood DP-1434F  Drill Single-Multiple
$329

CAM-WOOD DP-1434F Drill Press13-3/4" Floor model Drill Press with a durable cast iron head, table and base. Equipped with: -- 0.75 HP 140 - 3,600 RPM motor drives (16) different pulley speeds making it suitable for home or industrial use. -- Heavy duty 1/2" drill chuck on a #2 Morse taper. -- Unique 12-5/8" round table with clamping slots rotates 360°. -- Rack and pinion system makes it easy to adjust the table up and down.

Louis Sicotte
800-374-5009 ext:329
Call

2019 Cam-Wood CS-18AAT-16/EM-300  End Matcher
$82,800

CAM-WOOD CS-18AAT-16/EM-300 PUSHER TYPE CUTOFF SAW WITH 16' INFEED CAPACITY, CRAYON MARKING - Arranged to remove defects from Clear.Width & Thickness Capacity: Up to 1-1/2" x 12-1/2"Features: -- 18" Automatic Cut Off Saw equipped with automatic pusher for increased automation and efficiency -- 16' infeed table -- Works as an automatic pusher for defect removal -- PLC controlled automatic pusher device driven by servo motor at feed speeds up to 200 FPMAuto Pusher: -- Operator places crayon marks at the leading and trailing ends of a defect or waste zone -- Pusher moves the board to the first crayon marked defect, automatically completes the cutting cycle, and continues to position and chop the board at each crayon mark, thereby removing all waste zones. When the board is finished, the pusher returns to its starting position and starts on the next board -- Super Pusher travels up to 200 FPM -- Sealed, long-life ball bearings -- Precision ground cast iron table with heavy metal cabinet stands -- Easy to operate in all operations -- Saw blade comes up from beneath the table and returns after cutting for safe operation -- Totally enclosed blade guard prevents danger during cutting cycle -- Includes magnetic starters with overload protectionCutting Specifications: -- (45) Strokes/Min -- 18” Saw Blade Diameter with 1” Saw Arbor -- 10 HP Arbor Motor -- 3,200 RPM Blade Speed -- 90 PSI Compressed Air requirement with 1" Inlet -- (1) 4” Dust Hood -- Machine Size (W x L), 30" X 28-1/2" -- Automatic Transfer between Defect Saw and End MatcherCAM-WOOD EM-300 END MATCHER WITH THE FOLLOWING SPECIFICATIONS: -- Performs tongue and groove at both ends of random length boards -- Includes powered conveyors for infeed and outfeed -- Air operated hold downs keep material firmly in place during the machining process -- Cutter heads move in and out while cutting a tongue on the trailing end of one part and a groove on the leading end of the following pieceFeatures: -- PLC controls combined with touch-screen for maximum convenience of operation -- Each cutter head is powered by a separate motor driving each spindle at 7,500 RPM -- Accepts unlimited wood lengths via an automated conveyor for infeed and outfeed -- Cutterhead travel thru the wood is controlled by a frequency inverter that permits speed changes to suit various conditions. -- Pressure plates are actuated by air cylinders -- Hard chrome-plated table for maximum wear resistance -- Table rollers increase feeding smoothness -- Powered infeed roller conveyor is driven by a 1 HP motor -- 3,400 mm infeed roller conveyor and 2,200 mm outfeed conveyor tables are included -- Fully enclosed chip guards -- Air-operated clamp holds stock firmly in place. After work piece is clamped, cutter heads move in as they perform the shaping -- Spindles are precision constructed to cut accurately and smoothly -- Spindle height adjustment is displayed on a dial gauge -- CAM-WOOD’S 2-spindle design accommodates

Jeff Terrill
800-374-5009 ext:349
Call

2019 Cam-Wood CS-2145DR  Shaper
$23,500

CAM-WOOD CS-2145DR Tenoner with Dowel DrillTenoning/Coping machine for straight or miter material. Great machine for miter door production or stile and rail stock. -- Equipped with:6" High stackable spindle by pneumatic up & down with 3 different stops; easily and accurately setup for each cutter position.Drill heads for dowel hole at each end.One shaper head at each side of the table.Table moves from right to left by variable speed Pneumatic-Hydraulic power to achieve the fully cutting power.Twin table moves in and out separated for tongue and groove, end match application.Twin heavy-duty pneumatic pistons hold down the work pieces tightly to the table during the cutting process. -- Features:Rigid construction on the heavy sheet metal frame, cast iron table & base for durability usage.Heavy duty industrial motor is suitable for heavy duty cutting under full load.Linear guide rails and bearings let the operator moving the table smoothly.Cast iron fence locks in the table groove to finish 45° cut easily.Fully automatic cycle function, just place the material against the stops, machine will automatic clamp, move in for shaping/tenoning, come out and release the hold down.

Torry Hiddema
800-374-5009 ext:371
Call

2019 Cam-Wood CS-2145M  Shaper
$19,500

CAM-WOOD CS-2145M TenonerTenoning/Coping machine for straight or miter material. Great machine for miter door production or stile and rail stock. -- Equipped with:6" High stackable spindle by pneumatic up & down with 3 different stops; easily and accurately setup for each cutter position.One shaper head at each side of the table.Table moves from right to left by variable speed Pneumatic-Hydraulic power to achieve the fully cutting power.Twin table moves in and out separated for tongue and groove, end match application.Twin heavy-duty pneumatic pistons hold down the work pieces tightly to the table during the cutting process. -- Features:Rigid construction on the heavy sheet metal frame, cast iron table & base for durability usage.Heavy duty industrial motor is suitable for heavy duty cutting under full load.Linear guide rails and bearings let the operator moving the table smoothly.Cast iron fence locks in the table groove to finish 45° cut easily.Fully automatic cycle function, just place the material against the stops, machine will automatic clamp, move in for shaping/tenoning, come out and release the hold down.

Torry Hiddema
800-374-5009 ext:371
Call

2019 Cam-Wood CS-40PAAU  Shaper
$19,500

CAM-WOOD CS-40PAAU Automatic ShaperManufactures cabinet raised panel doors with (1) operator. -- Equipped with:10 HP Main motor drives 1-1/4" Dia. x 6" high stackable multi-cutter spindle @ 9,000 RPM to mill stile, rails, and raised panel profiles.Stackable cutter spindle with (3) pneumatic stop indexing significantly reduces setup time as each position is preset; the change from one cutter to another is achieved via a select switch for each operation. -- Features:Table movements from left to right are hydraulically powered for powerful cutting and cutting speed variability. Table movements in and out are pneumatically powered to assure that the template is followed sensitively and the shape is copied correctly. 40" door maximum.

Torry Hiddema
800-374-5009 ext:371
Call

2019 Cam-Wood BASIC-404  Router
$13,450

CAM-WOOD BASIC-404 CNC Router4' x 4' Flat Table CNC Router, perfect for machining all your small parts.Machine Bed/Base: -- The Welded & Structurally Engineered machine base provides a solid foundation for superior cut quality; the entire frame is stress relieved and heat treated. -- The Moving Gantry Bridge travels in the X- & Y-axis via inclined helical rack & pinion on "HIWIN" 1" (25 mm) thick hardened & precision ground rectangle linear guide ways, giving extra smooth movement, high speed traverse, and accurate cutting. -- The Tool Gantry Movement for the vertical Z-axis travels on a "HIWIN" 1" (25.4 mm) dia. precision ball screw for smooth & consistent movement.CNC Control & Operator Interface: -- Industrial Grade "WEIHONG DPS NK 105" CNC controller with LCD display module; includes integrating ARM11 processor, RAM 128M, Speed 600M, Flash 256M; setup to accept standard G-code programming formats along with conversational applications. DXF files can be imported, modified and edited. PC directly stores all part programs in a text edible file. Designed with superior 3-D cutting capability. -- Compatible with virtually all CAD/CAM programming software on the market.Working Table: -- 51" (1,295 mm) x 51" (1295 mm) x 7.75" (197 mm). -- (4) Independent vacuum zones.Axes Travel Range & Feed Speed: -- 1,200 IPM Max. traverse speeds. -- 950 IPM Max. working speed. -- "YAKO 2811" drives & step motors power all axes movements.Routing & Machining: -- (1) 6 HP (4.5 kW) Air cooled Router Collet Spindle with ER-32 collet Adaptor; variable programming speeds from 6,000 to 18,000 RPM. Requires ER-32 collets.Complete With: -- 5 kW Inverter. -- Manual lubrication device. -- Schneider electronic components.Optional (not included): -- 7.5 HP (11 kW) Vacuum Pump. -- CAD/CAM Drawing Software.Machine Specs: -- Machine power supply is wired for 220 Volts, 60 Cy, 3-Phase, 25 Amps. -- Machine weighs approx. 1,980lbs. -- Machine air consumption at 90 PSI is approx. 15 CFM.The BASIC-404 is a small machine with big boy capabilities!! Also available in T-Slot Version!!

Norm Schust
800-374-5009 ext:445
Call

2019 Cam-Wood BASIC-408  Router
$15,290

CAM-WOOD BASIC-408 CNC Router4' x 8' Flat Table CNC Router, great for entry level "Nested Base Manufacturing".Machine Bed/Base: -- The Welded & Structurally Engineered machine base provides a solid foundation for superior cut quality; the entire frame is stress relieved and heat treated. -- The Moving Gantry Bridge travels in the X- & Y-axis via inclined helical rack & pinion on "HIWIN" 1" (25 mm) thick hardened & precision ground rectangle linear guide ways, giving extra smooth movement, high speed traverse, and accurate cutting. -- The Tool Gantry Movement for the vertical Z-axis travels on a "HIWIN" 1" (25.4 mm) dia. precision ball screw for smooth & consistent movement.CNC Control & Operator Interface: -- Industrial Grade "WEIHONG DPS NK 105" CNC controller with LCD display module; includes integrating ARM11 processor, RAM 128M, Speed 600M, Flash 256M; setup to accept standard G-code programming formats along with conversational applications. DXF files can be imported, modified and edited. PC directly stores all part programs in a text edible file. Designed with superior 3-D cutting capability -- Compatible with virtually all CAD/CAM programming software on the market.Working Table: -- 51" (1,295 mm) x 98" (2,489 mm) x 7.75" (197 mm). -- (6) Independent vacuum zones.Axes Travel Range & Feed Speed: -- 1,200 IPM Max. traverse speeds. -- 950 IPM Max. working speed. -- "YAKO 2811" drives & step motors power all axes movements.Routing & Machining: -- (1) 6 HP (4.5 kW) "HSD" Air cooled Router Collet Spindle with ER-32 collet Adaptor; variable programming speeds from 6,000 to 18,000 RPM. Requires ER-32 collets.Complete With: -- 5 kW Inverter. -- Manual lubrication device. -- Schneider electronic components.Optional (not included): -- 7.5 -10 HP Vacuum Pump. -- CAD/CAM Drawing Software.Machine Specs: -- Machine power supply is wired for 220 Volts, 60 Cy, 3-Phase, 25 Amps. -- Machine weighs approx. 3,000 Lbs. -- Machine air consumption at 90 PSI is approx. 15 CFM.The BASIC-408 is a perfect entry level CNC machining center that doesn't chip away at your bottom line!

Norm Schust
800-374-5009 ext:445
Call

2019 Cam-Wood BASIC-510  Router
$17,450

CAM-WOOD BASIC-510 CNC Router5' x 10' Flat Table CNC Router, great for entry level "Nested Base Manufacturing".Machine Bed/Base: -- The Welded & Structurally Engineered machine base provides a solid foundation for superior cut quality; the entire frame is stress relieved and heat treated. -- The Moving Gantry Bridge travels in the X- & Y-axis via inclined helical rack & pinion on "HIWIN" 1" (25 mm) thick hardened & precision ground rectangle linear guide ways, giving extra smooth movement, high speed traverse, and accurate cutting. -- The Tool Gantry Movement for the vertical Z-axis travels on a "HIWIN" 1" (25.4 mm) dia. precision ball screw for smooth & consistent movement.CNC Control & Operator Interface: -- Industrial Grade "WEIHONG DPS NK 105" CNC controller with LCD display module; includes integrating ARM11 processor, RAM 128M, Speed 600M, Flash 256M; setup to accept standard G-code programming formats along with conversational applications. DXF files can be imported, modified and edited. PC directly stores all part programs in a text edible file. Designed with superior 3-D cutting capability. -- Compatible with virtually all CAD/CAM programming software on the market.Working Table: -- 63" (1,600 mm), 126" (3,200 mm), 7.75" (197 mm). -- (6) Independent vacuum zones.Axes Travel Range & Feed Speed: -- 1,200 IPM Max. traverse speeds. -- 950 IPM Max. working speed. -- "YAKO 2811" drives & step motors power all axes movements.Routing & Machining: -- (1) 6 HP (4.5 kW) Air cooled Router Collet Spindle with ER-32 collet Adapter, variable programming speeds from 6,000 to 18,000 RPM, Requires ER-32 ColletsComplete With: -- 5 kW Inverter. -- Manual lubrication device. -- Schneider electronic components.Optional (not included): -- 7.5 -10 HP Vacuum Pump. -- CAD/CAM Drawing Software.Machine Specs: -- Machine power supply is wired for 220 Volts, 60 Cy, 3-Phase, 25 Amps. -- Machine weighs approx. 3,500 lbs. -- Machine air consumption at 90 PSI is approx. 15 CFM.The BASIC-510 is a perfect medium sized entry level CNC machining center that doesn't steal away your profits!

Norm Schust
800-374-5009 ext:445
Call

2002 Costa KA CCT 1350  Sander
$56,500

COSTA KA CCT 1350 3-Head Sander: 52" width cap. and constant pass line conveyor height;Excellent Veneer and Solid wood sander with (2) Contact rolls and (1) Segmented platen.Head Configuration: -- 1st Head: Rubber covered contact roll, 9-7/8" dia., 35 HP motor. -- 2nd Head: Rubber covered contact roll, 9-7/8" dia. approx. 40 shore covering, 30 HP motor; -- 3rd Head: Segmented finishing platen, electronically controlled narrow segments conform to panel width and length for thin veneer sanding, 25 HP motor. -- Sanding Belt Info: 53" x 103" abrasive belts, air blast abrasive belt cleaning, pneumatic belt tensioning with electronic tracking. -- At Outfeed: Rotary panel cleaning brush, 7" dia. with 2 HP motor.Other Specifications: -- Equipped with: PLC processor controls. -- Feed System & Conveyor Bed: Variable feed speed conveyor with inverter control 16 - 82 FPM. -- Floating bed assembly for veneer sanding, vacuum conveyor bed assembly; Infeed & outfeed spring loaded hold down shoes on all heads; -- Features & Complete with: Anti-static bar and rotary air jet abrasive belt blowers; Powered raise & lower conveyor bed with LED readout; motor load meters on all sanding head motors. -- Actual Model is COSTA KA CCT 1350 3-Head sander -- Dimensions: 90" L x 80" W x 96" H; weight approx. 10,000 Lbs.

Joe Retzlaff
800-374-5009 ext:348
Call

2006 Costa KA CCT 1350  Sander
$29,800

COSTA KA CCT 1350 3-Head Wide Belt Sander:52" width cap. and constant pass line conveyor height;Excellent Veneer and Solid wood sander with (2) Contact rolls and (1) Segmented platen.Head Configuration: -- 1st Head: Rubber covered contact roll, 9-7/8" dia., 35 HP motor. -- 2nd Head: Rubber covered contact roll, 9-7/8" dia. approx. 40 shore covering, 30 HP motor; -- 3rd Head: Segmented finishing platen, electronically controlled narrow segments conform to panel width and length for thin veneer sanding, 25 HP motor. -- Sanding Belt Info: 53" x 103" abrasive belts, air blast abrasive belt cleaning, pneumatic belt tensioning with electronic tracking. Equipped with: -- PLC processor controls. -- Feed System & Conveyor Bed: Variable feed speed conveyor with inverter control 16 - 82 FPM. -- Floating bed assembly for veneer sanding, vacuum conveyor bed assembly. -- Infeed & outfeed spring loaded hold down shoes on all heads. Features & Complete with: -- Anti-static bar and rotary air jet abrasive belt blowers; -- Powered raise & lower conveyor bed with LED readout; motor load meters on all sanding head motors. Dimensions: 90" L x 80" W x 96" H; weight approx. 9,000 Lbs.

Joe Retzlaff
800-374-5009 ext:348
Call

2003 Costa KKCC-CCC-1350  Sander
$59,500

COSTA KK CC-CCC 1350 Wide Belt Bottom and Top Sander, (5) Heads;53" Width capacity, Bottom (2) drums, Top (3) drums.Bottom Machine KK CC: -- Constant passline height - 1,000 mm (39"). -- Motorized infeed conveyor, length - 1,000 mm. -- Motorized infeed pressure rollers - 200 mm diameter. -- Sectioned infeed pressure beam.1st Head: -- Rubber covered cylinder C/400, 80-Durometer, 50 HP (37 kW) Main motor. -- Pneumatic grit set with 4-position revolving turret. -- Intermediate pressure shoe with lips and rubber covered rollers.2nd Head: -- Rubber covered cylinder C/400, 60-Durometer, 40 HP (30 kW) Main motor. -- Pneumatic grit set with 4-position revolving turret. -- Outfeed pressure shoe with lip and rubber covered rollers. -- Outfeed roller, 60mm for linkage from feed table to conveyor. -- Horse Hair brush unit, 180mm dia., 1.5 HP motor. -- Vacuum Feed Table - 10 HP (7.5 kW). -- Vacuum set pneumatic for (2) levels of vacuum pull control.Top Machine KK CCC: -- Infeed roller, 60 mm for linkage from feed table to conveyor. -- Motorized infeed pressure rollers - 200 mm diameter. -- Sectioned infeed pressure beam.1st Head: -- Rubber covered cylinder C/400, 80-Durometer, 50 HP (37 kW) Main Motor. -- Pneumatic grit set with 4-position revolving turret. -- Intermediate pressure shoe with lips and rubber covered rollers.2nd Head: -- Rubber covered cylinder C/400, 60-Durometer, 40 HP (30 kW) Main motor, -- Pneumatic grit set with 4-position revolving turret. -- Intermediate pressure shoe with lips and rubber covered rollers.3rd Head: -- Rubber covered cylinder C/400, 40-Durometer, 30 HP (22 kW) Main motor. -- Pneumatic grit set with 4-position revolving turret. -- Outfeed pressure shoe with lip and rubber covered rollers. -- Horse Hair brush unit, 180 mm dia., 1.5 HP motor.Equipped With & Features: -- Vacuum Feed Table, 10 HP (7.5 kW). -- Vacuum set pneumatic for (2) levels of vacuum pull control. -- (5) Oscillating sanding belt cleaners with timed entry.

Joe Retzlaff
800-374-5009 ext:348
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved