Woodworking Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 2 of 86
1701 Results Found
Sort By 
Recently Added Items
2000 Quickwood
Call For Price
2000 Quickwood
2018 Axyz Automation Panel Builder 5018 CNC
Call For Price
2018 Axyz Automation Panel Builder 5018 CNC
2019 Biesse Akron 1440 PUR
Call For Price
2019 Biesse Akron 1440 PUR
2011 Schelling FH 8 Rear Loading  with Panel Turning
Call For Price
2011 Schelling FH 8 Rear Loading with Panel Turning
Call for Price

Stage #1 48” width 2 lights Stage #2 40” width 3 lights 220 volt singular phase

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 5,749

1945 American Sawmill Machinery Co Monarch 24" Planer. Power - direct drive 5 HP. Restored and refurbished. Very little original use at Old Pioneer Sawmill.

Sawmill Exchange
713-729-6455
Call

Call for Price

The seller has confirmed that these (2) Amitec VT veneer slicers are in good working/running condition. They are ready to load! - (2) Available - Slices log cants in the lengthwise direction - Compares to the Marunaka SL-250 - 9-7/8" (250mm) Max lumber slicing width: With up to 9-7/8" high cant, veneer thickness 1/25" to 3/8". 75° knife angle with 18 ° knife bevel - Knife length: 46-1/2" (1,180mm) - Motorized upper feed beam with Continuous belt feed - Variable speed: 120-180FPM (40-60 m/min) - 30HP feed motor - Head elevator: 1HP - Approximate weight: 16,000 lbs - 327"L x 62"W x 75"H

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

ANGELO CREMONA TZE 4000 4 m up-stroke Veneer Slicer with flitch pushers and MERRITT vacuum table.

Tony Cornacchione
800-374-5009 ext:432
Call

Call for Price

Auburn End Pro End Matcher Width Cap: 8" Thickness cap: 2" Spindle motor: 5 HP Min piece length: 4" Variable speed spindle Spindle diameter: 1-1/4"

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

AXYZ Panel Builder 5018 CNC Router

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 4,750

9-Spindle head tilts/swivels for horizontal or vertical operation or any angle in between and traverses left to right for (18) or (27) hole lines. -- Heavy duty positive stops ensure accuracy. -- Complete with: Left & right fences with stops, (3) synchronized air hold downs, foot pedal control.

Ed Webb
800-374-5009 ext:377
Call

Call for Price

Machine for manufacturing mitered doors…cuts trims, drills and finger joints corners 3 HP saw with 400 mm blade (2) 7-1/2 HP shaping heads clockwise/counter clockwise PLC controlled

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

BACCI T4MO 4-Spindle Copy Lathe/Shaper w/Sanding. Shaping with (4) cupped cutters and sanding with individual belts.Specifications: -- Capacity: (4) Spindle duplicating/carving/copy heads with (4) copy belt sanders for asymmetrical parts. Max. copying dia.: 6.5" (165 mm), max length capacity 39.4" (1000 mm). -- Minimum copying radius: 17.5 mm, (.7"). Minimum work radius: 17,5 mm (.70").Cutter diameter: 35 mm, (1.4") -- Speeds: Spindle Speed : 5,300 RPM. (3) Carriage feed speeds: 3 IPM (75 mm/Min) up to 7.87 IPM (200 mm/Min). Spindle speeds: 25 RPM minimum to 42 maximum RPM. -- Features: (4) Spindles with pre-loading centering station and pneumatic clamping. -- Drives: Carriage feed motor 1 HP; Cutter drive motor 7.5 KW (10 HP). Sanding heads motor 2.2KW (3 HP). -- Overall Dimensions: 4' x 8' x 6'. -- Approx. weight: 3000 Lbs. -- NOTE: Larger diameters are possible by using every second carriage position, ie. (2) heads instead of four heads.

Tony Cornacchione
800-374-5009 ext:432
Call

$ 3,250

BACCI - MOA, ...Single Table Mortiser.Mortises or bores holes on chairs, furniture or case goods. -- Single table and spindle. -- 3 HP - 9,500 RPM Motor with (200) oscillations/Min.Features: -- 9" x 19" Table tilting +/- 20° (side-to-side). -- (1) Adjustable overhead pneumatic holddown. -- 3" Max. slot depth, 4-3/8" max. slot length, 1-15/16" max. dia. tooling.

Joe Retzlaff
800-374-5009 ext:348
Call

$ 4,260

BACCI MOA Single Table MortiserMortises or bores holes on chairs, furniture or case goods. -- Single table and spindle, -- 3 HP - 9,500 RPM motor with (200) oscillations/Min. Features: -- 9" x 19" Table tilting +/- 20° (side-to-side), -- (1) adjustable overhead pneumatic holddown. -- 3" Max. slot depth, 4-3/8" max. slot length, 1-15/16" max. dia. tooling.

Joe Retzlaff
800-374-5009 ext:348
Call

$ 10,500

2-Machine System consisting of BALESTRINI "PICO" Round End Tenoner & BALESTRINI "MICRON" Slot Mortiser. -- "PICO" Round End Tenoner: Left & right "twin" tilting tables (one table is always in the cutting position); 14" x 9" tables tilt 0ø - 20ø, both table fences with pin stops for indexing stile and rail doors. -- Fences swivel up to 45ø, each table with vertical pneumatic holddown; 4 HP cutter block motor, 1 HP cutter block rotation motor, 9,000 RPM spindle speed. -- Capacity: 3-15/16" (100 mm) Max. tenon length, 1-3/16" (30 mm) max. thickness, and 1-31/32" (50 mm) max. depth. - Hourly production rate of (600 - 700) tenons. -- "MICRON" Slot Mortiser: Dual spindle system, (1) each side with tables and overhead holddown, 3 HP - 9,000 RPM spindles, (60 - 350) oscillations/Min, 18 mm collet dia. -- Capacity: 4-23/32" (120 mm) Max. length of slot, 3-1/8" (80 mm) max. slot depth, 1-3/16" (30 mm) max. slot thickness. - Hourly production rate of (500 - 800) slots. --The PICO has a timing issue and may just need to be adjusted.

Joe Retzlaff
800-374-5009 ext:348
Call

$ 12,700

BALESTRINI C 70 Double Sided Feed Through Copy Shaper;Profiles various chair, table and casegood components from a prepared template. The feed through system allows curved or extremely long parts to be shaped with little or no limitation. Equipped with: -- (2) Vertical shaper spindles, 7.5 HP motor each; 30 mm dia. spindles, 8,000 RPM cutter rotation. -- Reversing rotation by switch for climb cut or conventional cut. Specifications: -- Max. working width 358 mm (14-1/8"), max. working height 118 mm (4-5/8"), min. working length 240 mm (9-1/2"); max. size of cutter blocks 90 mm x 120 mm and up to 3/8" vertical adjustment of heads. -- Part on template block is being shaped by running between spring loaded spindles with copy bearings following the template pattern. -- 1 HP variable feed motor 3 - 26 FPM, hand crank adjustable horizontal rubber infeed & outfeed holddown rollers. -- Machine has (2) 120 mm diameter dust outlets. -- Machine dimensions: 53" x 49" x 43" Machine weight: 2,310 lbs.

Torry Hiddema
800-374-5009 ext:371
Call

$ 10,900

BALESTRINI MINI C 2500 DOUBLE SIDED TEMPLATE PROFILE SHAPERSpecifications: -- (2) Offset shaping heads with 10 HP (7.5 kW), 230/460 volt three phase drives. (1 each side) -- Maximum reciprocating length 98" (2500 mm). -- Maximum height 7" (180 mm). -- Maximum width between spindles 8", and shaping heads are staggered for full end rounding. -- 1¼” Diameter work arbors with 7″ under the nut capacity, and Spindle speed of 8400 RPM -- Hydraulic stroke of 9-3/4″ wide x 110″ long tee slotted work table, with feed speeds of 3 - 49 feet per minute (1-15 m/Min.) powered by 3 HP, 230/460 volt three phase hydraulic pump -- Overhead beam clamp bar with (4) adjustable clamps. -- Push button operator control station.

Torry Hiddema
800-374-5009 ext:371
Call

$ 4,200

BALESTRINI 2 CAP Mortiser --Automatically mortises or bores round holes in chairs or case good --Specifications -- Twin tables with pneumatic holddown clamps, (1) on each side eliminating dead cycle time, 19" long tables tilt left or right 0ø to 20ø. --Equipped with & Features -- 3 HP - 9,000 RPM Spindle motor and 1 HP oscillation motor. -- Spindles are mounted on prismatic guides with adjustable bronze gibs and move by rack & pinion, -- (120) to (240) oscillations/Min; 4-23/32" max. oscillation length, -- 3-1/8" max. depth, 7/8" max. bit dia., 13 mm spindle collet dia.

Joe Retzlaff
800-374-5009 ext:348
Call

Call for Price

Barberan UV Oven

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Barr-Mullin Opti Rip Wondersaw, optimizer w/computerized laser controls, Compu-rip scans the boards for width to determine the optimal cutting solution, floor space: 21'x5' (315 sq. ft.) Good condition. Accepting Best Offers

 Van Nuys, CA
National Hardwood Flooring
818-645-6320
Call

Call for Price

Barr Mullin Wondersaw Optimizer with Computerized Laser Controls Tichniess: Up to 3" Width: 31" Min cut: 4" Feed height: 34-1/2" Floor Space: Apprx 21' x 15' 480 volt

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 5,000

Baxter Whitney "No. 32A" Planer - 30" Machine is in full working order. We will provide services for power disconnect as well as loading onto any transport vehicle provided.

Sawmill Exchange
713-729-6455
Call

$ 5,000

SALE PENDING Baxter Whitney "No. 32A" Planer - 30" Machine is in full working order. We will provide services for power disconnect as well as loading onto any transport vehicle provided.-

Sawmill Exchange
713-729-6455
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved