Moulders For Sale
Category
Moulders
105 Results Found
$ 16,900
WEINIG Profimat 23 E 5-Head Moulder5-Head (B-R-L-T-B) with working dimensions 9-1/16" x 4-3/4". -- Spindle sequence: Bottom 10 HP, right/left 10 HP, top 15 HP, and bottom 10 HP motor. -- All motors with mechanical spindle brakes. -- Spindle dia. 1-1/2" with cutterhead speed of 6,000 RPM. -- Equipped with Mechanical digital readouts for all spindles, and Digiset readouts for left and top spindles. -- Feed motor 4 HP with speed of 20 - 76 FPM. -- Table inserts for right & left spindles for the running of narrow stock; outfeed table roller. -- Infeed table 2 M (6-1/2') -- Manual Waxilit pump, central lubrication from front of the machine. -- Includes BEN-200 Mahros Horizontal Roller Feeder for moulder infeed, as shown in photos.Seller is also including Heads and Knives with this machine.
$ 33,500
$ 26,900
WEINIG PROFIMAT 22N Feed Through Moulder/Grinder Package Specifications: -- 5-Head (B-R-L-T-B), working width 8-5/8" x 4-3/4". -- Head sequence: Bottom 10 HP, right/ left 10 HP, top 15 HP, and bottom 10 HP motor. -- Spindle dia. of 1-1/2" with cutterhead speed of 6,000 RPM. -- Features: Mechanical digital readouts on all spindles; Digital readouts on left & top spindle. -- Feed speed variable from 18 - 78 FPM, 3 HP feed drive. (1) Powered table roller in machine bed at out feed. -- Complete with: Infeed straightening table 2 M (6'-6") and side pressure roller mounted to infeed table. -- Manual table lubrication pump, manuals sound & safety enclosure and dust collection manifold . -- Includes seventeen heads, extra feed wheels and neoprene feed wheels, as shown in Photos. -- Seller is also including the Owner's Manual.WEINIG RONDAMAT 934 Profile Grinder: -- 9" Arbor length, 11-1/2" max. tool dia., 1.5 HP motor, tilting head assembly for back relief grinding, clearance angle on peripheral of tools 10° - 30° and to each side 0° - 20°. -- Variable feed speed 1,800 - 3,000 rpm via a vari-speed gearbox, on-board wheel dressing, 9" max. wheel dia.; 0.16 HP coolant pump with built-in coolant tank. -- Includes: Operators manual, clamping nut, and pull-off bolt, 1-1/2" arbor, and an extra set of grinding wheels and toolingWEINIG OCMS measuring stand (not shown): -- With a working width of 300 mm. -- The allowable tool dimension of 3" to 11-3/4" head diameter. The measuring stand allows for electronic measuring and indicating of cutter head dimensions with electronic digital readouts; visually establishing the tool measurement, no setting errors, and no expensive CNC control. -- Magnifier screen viewer with 20:1 magnification; the cutterhead is placed in Powerlock tool post, all the operator does is view the scope and move the measuring carriage via precision dialing left to right. -- Measured values (radial) and (axial), tool dimensions both minimum and maximum are displayed. -- Includes: 1-1/2" arbor.These machines came out of a Mom and Pop shop and have been very well maintained. Both machines are in great working condition, and have no running issues.
Call for Price
Weinig Profimat 23E 5 head moulder Bottom Right Left Top Bottom Complete with Weinig Rondamat 950 profile grinder. 460 volt 3-phase Clean machines from a low volume specialty shop.
Call for Price
Manufacturer Specifications Weinig 5 Head (B-R-L-T-B) P26 S Super Moulder with 9-1/16" x 4-11/16" capacity. Head sequence: - Bottom 10 HP - right & left 10 HP - Top 10 HP and bottom 10 HP Technical Specifications - Grooved bed moulder - Mechanical brakes on all spindles - 460V three phase - Spindle dia. 1-1/2" with cutterhead speed of 6 000 RPM - mechanical digital readouts all spindles - Feed motor 5 HP - variable speed of 20 - 78 FPM
$ 64,500
WEINIG Powermat 1000 6-Head Feed Trough Moulder(B-R-L-T-T-U); working cap. 9-1/16" x 4-3/4". Head sequence: -- Bottom 15 HP, Right 15 HP, Left 15 HP, Top 15 HP, Top 40 HP and universal 30 HP motor. All motors with electronic brakes. WEINIG Touch-Screen "Power Com" -- PowerCom Plus software system features: Profile drawing storage, profile dimensions, tool changes and production optimization. -- Electronic LED readouts for all tool holder settings, including chip breakers & pressure elements. -- Spindle #1: 1-13/16" w/Cutterhead speed of 8,000 RPM; -- PowerLock tool holders on #2 - #5 with 12,000 RPM and universal tool holder variable from 4,000 to 12,000 RPM and with high precision bearings; adjustment of vertical tools 2-3/16" axially. -- Motorized tool positioning; radial & axial on tool holders #2 - #5; motorized feed beam adjustment with independent adjustment top head; top head with independent adjustment of chip breaker & pressure element. -- Universal spindle with 270° of movement. -- Variable feed speed from 20 - 118 FPM, 7.5 HP inverter controlled Cardan feed drive, overhead feed wheels with pneumatic pressure. -- Vertical tools with adjustable table plates to cutting circles, hardened infeed bed plates before & after 1st bottom head. -- Chromed tables and fences, (2) powered table rollers in bed and (1) between left and top spindles and (1) at outfeed. -- Infeed straightening table 2 M (6-1/2').Equipped with: Pedestal for machine controls separate from the electrical cabinet, central location of lubrication points. -- Electromagnetic interlocking of safety hood, automatic table lubrication pump and (2) lights inside reinforced sound enclosure; phone modem..
$ 36,500
WENIG PROFIMAT 23E Feed Through Moulder5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindle Sequence: Bottom 10 HP, Right & Left by 15 HP, Top 15 HP and Bottom 10 HP motor. -- Spindles: 1-1/2" diameter. with cutterhead speed of 6000 RPM. -- Digital Readouts: "DigiSet" digital readouts for chipbreaker and pressure element at top spindle -- FPM: Variable feed speed from 17 - 78 FPM, powered by a 4 HP motor -- Safety: Full enclosure sound proof booth -- Receding chipbreaker & pressure element at top spindle -- Rollers: Side pressure opposite right spindle, spring loaded with 2 rollers and driven outfeed roller in bed. -- Infeed straightening table 2 meter (6'6") -- Features central lubrication system via manual table lubrication pump. -- Machine is wired for 460 Voltage / 3 Phase Power using 79 Full Load Amps. -- Includes - All heads, rollers, setup tools shown are included, Owner's Manual, and 4-hose Dust manifold.This machine runs perfectly, is in Good Condition- with some dents to the outer sound enclosure. Overall Dimensions: 132” x 64” x 64”Approx. 8,000LBSRemoval is responsibility of buyer. Seller can build a crate, and put it on a truck for an additional $1,000.00
$ 11,800
WEINIG PROFIMAT 23 Feed Through Moulder;(6)-Heads (B-R-L-T-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindles 1-1/2" dia. with cutterhead speed of 6,000 RPM. -- Feed System & Features: variable feed speed from 20 - 78 FPM, powered by a 5.5 HP motor. -- Receding chip breaker at top spindles. Side pressure opposite right spindle; spring-loaded with (2) rollers; driven outfeed roller in bed. -- In-feed straightening table 2 M (78"), side pressure roller mounted to in-feed table. Note: Bare Machine: No dust manifold or tooling.
Call for Price
arrangement: B-R-L-T-T-B Power arrangement : 7.5KW-7.5KW-7.5KW-11.0KW-15.0KW-7.5KW Frequency-controlled feed system: 4.0KW 00502502) 5 - 30 m/min Power supply : 230V/60Hz (USA) Control voltage 1: 115V AC
$ 11,250
WEINIG 970 OPTICONTROL Powerlock Electronic Measuring and Display SystemSpecifications: -- Cutting Circle Dia.: 0 - 300 mm, Tool Length: 0 - 310 mm, Max. Measuring Width: 310 mm. -- Non-Contact measuring of tool dimensions radius and height and their indication on the electronic digital displays. -- Device is equipped with: projector for optical recording of measured values, electronic digital displays for tool radius and tool height. -- Complete with tool carrier for PowerLock tools, and prepared for PC connection.
Call for Price
Weinig Powermat 1000 Moulder - 8,000 rpm machine out of production 2/2024. Converted from 12,000 RPM. - Working cap.: 9-1/16” x 4-3/4” - Motors: B-15 HP, R-15 HP, L-15 HP, T-30 HP, T- 40 HP and B-30 HP. - Spindles/Tool Holders: Spindle 1-13/16" at 8,000 RPM; HSK tool holders 2-6 8,000 RPM. Motorized tool positioning for tools 2-6 Radial and Axial. - CNC: WEINIG Power Com "Touch Screen” PLUS software with tool data storage 300 profiles, profile data and tool monitoring. Led readouts to all spindles/tool holders; including chipbreaker’s and holddown’s. Modem for external diagnostics. - Feed: Variable inverter drive speed with 7.5 HP motor with speeds from 18-118 FPM. - Infeed/Tables: 2M (6'-6”) infeed table with side pressure roller, AUTO table lubrication and chromed tables and fences.
$ 54,900
Call for Price
Call for Price
Weinig Powermat 400 Moulder HSK heads Radial and axial head controls Still under power and available for inspection.
$ 30,000
1996 Weinig Hydro-Mat 23 (6) head moulder w/ control station and hydraulic power unit, S/N 023-2386, (8) 9.5”, (6) 6 3/4”, and (19) 2.5” heads, all but (4) with knives (most 6 knives per head), includes head and knives currently installed on moulder w/ outfeed 18” C14.5 belt conveyor and drive w/ toolbox w/ misc. knives, templates for knife & other misc. W/ Weinig (9) strand infeed table S/N 314-LCF/16 w/ hydraulic power unit w/ blow, $20,000 without tooling (ref # 162) Call Amy for more information (928) 723-9449
Call for Price
Weinig Unimat Gold - 6-Head Machine Weinig Rondamat R960 Grinder Includes: Tooling and approx (200) profiles from tool room
Call for Price
This entire listing is being sold as one lot. 1997 Weinig U23EL 6-Head Moulder with infeed and outfeed decks 2000 Weinig R960 profile Grinder with Weinig 970080 Opticontrol Stand TF-900 Resaw Precision 281 chop saw Precision 281 RH chop saw Shanklin F2 wrapper Damark STR 16ADD heat tunnel Ogam 280 Rip Saw
Call for Price
Weinig Powermat 500 Moulder MFG Specs: 460V; ELECTRONIC "SMART" BRAKES; POWERCOM+TOUCHSCREEN; MODEM FEED ELECTRONIC 7.5HP; #1:BOTTOM 10HP; 8000RPM; 1 13/16 SPINDLE; TABLE PLATES HARDENED B4 #2:RIGHT 15HP; 8000RPM; RAD ADJ; #3:LEFT; 15HP; 8000RPM; PRESS SHOE W/2 LATERAL PRESS ROLLERS SPR MT #4:TOP 25HP; 8000RPM; REC CB; TBL PLT FOR WOODEN INSERT; PROFILE GUIDE AFTER; PL #5:BOTTOM 20HP; 8000RPM; TABLES/FENCES CHROMED:INFEED TABLE 1050mm; 1 POWERED ROLLER ; MAN-WAX; CL LUBE ELECTRICS:EL CAB + OPERATOR PEDESTAL SEPARATE PRESSURE:FIXED PRESSURE ROLLERS ABOVE SPRING MTD; PRESSURE ROLLER AT INFEED SAFETY: SAFETY INTERLOCK; 1 LIGHT INSIDE ENCL; STRAIGHT EDGE;2 CLAMPING LENGTH 240 mm/ DIA 1 13/16"; GUIDE EDGE AFTER LEFT TOOL HOLDER;
Call for Price
Call for Price
2002 Weinig U23E 5-Head Moulder 2021 Doucet MFE-150-12 Infeed System This system is still in production and ready to be loaded out.