Moulder For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 3 of 6
115 Results Found
Sort By 
Recently Added Items
1988 Weinig PROFIMAT 22N
$4,000
1988 Weinig PROFIMAT 22N
1980 Weinig U 22 N
$4,500
1980 Weinig U 22 N
2003 SCM TOPSET 23
$31,000
2003 SCM TOPSET 23
SCM P 170  Moulder
$10,900

SCM P170 Feed Through Moulder, 5-Head, working cap. 6-5/8" x 4-3/4".Head sequence (B-R-L-T-U): -- Bottom Groover/Surface Planer - 8.9 HP (6.6 kW). -- Right Side - 8.9 HP (6.6 kW). -- Left Side- 8.9 HP- (6.6 kW). -- Top- 17.5 HP (13 kW). -- Universal - 12 HP (9 kW). Spindles: -- (5) Spindles, all 1-13/16" dia. with cutterhead speed of 6,000 RPM.Featured: -- Feed- Chainless Feed drive motor, 2.4 HP (1.8 kW), 18 to 118 FPM. -- Motorized raise-and-lower of overhead feed beam; Lift unit motor 0.87 HP (0.65 kW). Equipped with: -- 67” Infeed table. -- Machine comes with extra feed wheels and accessoriesDimensions: Length - 174”, Width - 65”, Height - 67”.

Bob Dykstra
800-374-5009 ext:378
Call

2000 SCM SUPERSET 23 XL  Moulder
$21,500

SCM SUPERSET 23 XL Feed Through Moulder and TOOLSET 16 Profile Grinder; 5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-3/4". -- Head sequence: Bottom 12 HP, right 9 HP, left 9 HP, top 18 HP and bottom 12 HP motor. Includes spindle brakes. -- Spindle: Dia. 1-13/16" with cutterhead speed at 6,000 RPM. SCMI RAPID "Set Up" setting system for left and top vertical heads to accommodate width and height tool measurements. All spindles with mechanical digital readouts for height and width adjustments. Digital readout for chipbreaker and pressure element top spindle. -- Feed: Variable feed drive 4 HP with feed speed from 16 - 87 FPM. -- Tables: Infeed 2 M (6'6") with manual table lubrication pump. Central lubrication. Side pressure roller mounted to infeed table. Lighted safety enclosure. -- Includes: TOOLSET 16 Profile Grinder and (1) set of used heads.

Bob Dykstra
800-374-5009 ext:378
Call

2000 SCM SUPERSET XL  Moulder
$19,900

SCM SUPERSET XL Feed Through Moulder; 5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-3/4".Specifications: -- Head sequence: Bottom 18 HP, right 12 HP, left 12 HP, top 24 HP and bottom 12 HP motor. -- Spindle diameter 1-13/16" with cutterhead speed at 8,000 RPM. All spindles with mechanical digital readouts for height and width adjustments. Digital readout for chipbreaker and pressure element top spindle. -- Electrical adjustment of feeding rollers with mechanical digital readout. -- Variable feed drive 6.6 HP with feed speed from 16 - 100 FPM. -- Infeed table 2 M (6'6") with with manual table lubrication pump.

Bob Dykstra
800-374-5009 ext:378
Call

2003 SCM TOPSET 23  Moulder
$31,000

SCM TOPSET 23 Feed Through Moulder; 6-Head (B-R-L-T-T-B), working cap. 9-1/16" x 4-3/4". -- Head sequence: Bottom 12 HP, right 9 HP, left 9 HP, top 18 HP, top 18 HP and bottom 12 HP motor. Includes spindle brakes. -- Spindle: Dia. 1-13/16" with cutterhead speed at 6,000 RPM. All spindles with mechanical digital readouts for height and width adjustments. Digital readout for chip-breaker and pressure element top spindle. -- "Set Up" setting digital readouts on top and outside left spindle with SCM patented set-up system (the hold-downs, chip-breakers, feed wheels, and outboard fence line automatically adjust to the cutting circle dia. of the heads, then the actual moulding dimensions are set), mechanical digital readout on all other spindles adjustments with the exception of the 1st bottom head, cutting circles 8 7/8". -- Includes: SCM 346 grinder, -- Feed: Variable feed drive 6.6 HP with feed speed from 20 - 118 FPM, -- Tables: In-feed 2 M (78") with manual table lubrication pump. Central lubrication. Side pressure roller mounted to infeed table, pneumatic pressure on all feed wheels, lighted safety enclosure. -- Weight: 6,800 Lbs.

Bob Dykstra
800-374-5009 ext:378
Call

2000 SCMI Superset 23  Moulder
Call for Price

SCMI Superset 23 5-Head Moulder: Bottom, Right, Left Top, Bottom Working capacity: 9-1/16" x 4-3/4" Variable speed: 16-87 FPM

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

SCMI Compact 22  Moulder
Call for Price

SCMI Compact 22 Moulder with Controls

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

2017 Silver SF-5020AH  Moulder
$21,700

SILVER SF-5020AH Feed Through Moulder & Planer: 5-Head Moulder for "S4S" Planing; 8" Width x 4" Height capacity.Specifications: -- Head sequence: Bottom 7.5 HP, right 7.5 HP, left 7.5 HP, top 15 HP, bottom 10 HP motor. -- With radial and axial adjustments with mechanical digital readouts on important spindle adjustments. -- All spindles 40 mm dia. at 6,000 RPM. -- Variable feed speed of 20 to 80 FPM, 4 HP feed drive motor. -- Powered feed rollers top and bottom. -- 6'6" In-feed straightening table with adjustable fence line. -- Chromed bed plates and fence line. -- Centralized control panel. -- Full safety sound enclosure.Includes "RMS-40" Radius Measuring Stand: -- For the accurate radius measuring of cutterheads; allows for speedy tool changes on moulder. 12" Long x 6-1/2" base, 1-1/2" dia. arbor will handle up to 9-1/4" long tool body. -- Digital caliper rides up and down on precision machined octagonal bar.Includes (5) Cutter Heads; -- (1) Spiral Insert Head for Surfacing with 125 mm Cutting Circle and 200 mm Cutting width, with (6) rows of insert knives; -- (2) 4-Knife, 122 mm dia. 203 mm cut length dual hook heads and -- (2) 4-Knife, 122 mm dia., 100 mm cut length dual hook heads.

Bob Dykstra
800-374-5009 ext:378
Call

2007 Silver SF-6020AH  Moulder
$15,550

SILVER 6020 AH Through Feed Moulder: 6-Head (B-R-L-T-T-B) Feed Through Moulder with 8" x 6" working capacity. -- Head sequence: Bottom 7.5 HP, right 7.5 HP, left 7.5 HP, top 15 HP, top 10 HP and bottom 10 HP motor. -- Spindle dia. 40mm with cutterhead speed of 6,000 RPM. Mechanical digital readouts for axial and radial adjustments. -- Variable feed speed of 20 - 78 FPM, with 4 HP feed drive motor. -- Infeed table 2M (6'6"), straightening table with adjustable fence line, chromed bed plates and fences. -- Complete with: variety of cutterheads, centralized control panel, chipbreaker and full sound and safety enclosure. -- Note: this moulder is like new condition used approx. 15 hrs. per month.

Bob Dykstra
800-374-5009 ext:378
Call

2009 Silver SF-6023AH  Moulder
$33,900

SILVER 6023AH Moulder Feed Through -- 6-Head (B-R-L-T-T-B), working cap. 9-1/16" x 6". -- Head sequence: Bottom 10 HP, top 10 HP, right 10 HP, left 10 HP, top 15 HP, top 15 HP and bottom 15 HP motor. -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. All spindles with mechanical digital readouts. -- Feed: Variable speed of 18 - 97 FPM, with 5 HP feed drive motor. Powered feed rollers top and bottom. -- Infeed: Straightening table 2M (6'6"), with side pressure roller and table lubrication pump. -- Includes::(6) heads with insertsOperator/spareparts manuals,set up tools,centralized control panel,sound and safety enclosure.

Bob Dykstra
800-374-5009 ext:378
Call

2005 Silver STAR 6A  Moulder
$15,700

Silver Star 6A: 6-Head (B-R-L-T-T-B) Profile or "S4S" Moulder; Working dimensions: 9" x 6" capacity. -- Head sequence: Bottom 10 HP, right 10 HP, left 10 HP, top 20 HP, top 15 HP and bottom 15 HP motor. -- Electronic digital control for the "in/out" adjustment of the left spindle; electronic digital controls for top spindles "up/down". Mechanical digital readouts on all additional spindle adjustments. -- All spindles 40 mm dia. with spindle #1 at 6,000 RPM and spindles 2 - 6 at 8,000 RPM. -- Variable feed speed of 20 to 78 FPM, 7.5 HP feed drive motor. Powered feed rollers top and bottom. (3) Powered rollers in the table. -- 2M (6'6") In-feed straightening table with adjustable fence line. -- Chromed table plates and manual table lubrication. -- Centralized control panel. Full safety sound enclosure. -- Includes arbor wrench, adjustment crank, numerous spindle spacers, and feed wheels are included. -- Note: The dovetail for the second bottom motor/spindle requires adjustment for trueing the spindle in line.

Bob Dykstra
800-374-5009 ext:378
Call

2019 Ultra GL-630H  Moulder
$179,900

ULTRA GL-630H Feed Through Moulder: 6-Head (B-T-R/L-T-B), "Flooring" working capacity of 12" x 6".Specifications: -- Head sequence: Bottom 25 HP, top 30 HP, right 20 HP/left 20 HP (opposing), top 25 HP, and bottom 25 HP motor. -- Spindle dia. of 1-13/16" with cutterhead speed of 6,000 RPM; all spindles with high prevision bearings. -- Auto. positioning of the left & top spindles radially; all additional spindles with digital readouts, including chipbreaker & pressure elements. -- Pneumatics on all chipbreakers, pressure elements, and holddown rollers. -- Horizontal spindles with HydroLock outboard bearings on #1, #2, #5 & #6. -- Straight jointer on spindles #5 & #6; Profile Jointers on spindles #3, #4, #5 & #6. Equipped with: -- Inverter controlled feed drive, variable speed of 26 - 260 FPM. -- Infeed table 1.2 M (4') with all table plates & fences hard chromed to RC 70. -- Machine table includes: (5) Table rollers for smooth through feed; short stick attachment for through feed on pieces down to 230 mm. -- Electrical cabinet & pedestal for machine controls separate from machine, Heavy Duty sound enclosure. -- Includes Startup training and Warranty!

Bob Dykstra
800-374-5009 ext:378
Call

Call for Price

Unknown Infeed  Moulder
Call for Price

Moulder Infeed Table

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Unknown  Moulder
Call for Price

Moulder Infeed

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Vonnegut Machine Co M9  Moulder
Call for Price

Vonnegut M9 4 Head Planer/Moulder Serial# 8364, 8" Wide Planer Heads

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Wadkin 6 Head  Moulder
Call for Price

Wadkin 6 Head Molder/Planer

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

2001 Wadkin K-23  Moulder
$19,900

WADKIN K 23 Moulder Feed Through 6-Head (B,R,L,T,T,B) with working capacity of 9-1/2" x 5" capacity. -- Head sequence: Bottom 15 HP, right & left 20 HP, top 20 HP, top 15 HP and bottom 15 HP motor. -- Spindle dia.: 1-13/16" at 6,000 RPM. Mechanical digital readouts on all head adjustments except 1st bottom head; digiset readouts for left and top spindles, top heads with MDR for chipbreakers and pressure elements. -- Infeed table: 2 M (6'6"), adjustable table plates for vertical spindles. Machine with top driven feed rolls & power bed rolls, motorized overhead feed beam with dual speed for rise-and-fall, full Cardan feed drive with independent adjustment to feed rollers after top head; side pressure opposite right side head, spindle locks for axial adjustment. Manual bed lubrication -- Feed drive: 5 HP motor, variable feed speed from 23 - 96 FPM. -- Includes: (1) Light in sound enclosure, set of maintenance tools, operator and spare part's manuals and 2-9" 3-6" 2-4" 2-2" assorted cutterheads.

Bob Dykstra
800-374-5009 ext:378
Call

1998 Wadkin K-23  Moulder
$12,500

WADKIN K 23 Moulder Feed Through 6-Head (B,R,L,T,T,B) with working capacity of 9-1/2" x 5" capacity. -- Head sequence: Bottom 15 HP, right & left 20 HP, top 25 HP, top 25 HP and bottom 15 HP motor. -- Spindle dia.: 1-13/16" at 6,000 RPM. Mechanical digital readouts on all head adjustments except 1st bottom head; digiset readouts for left and top spindles, top heads with MDR for chipbreakers and pressure elements. -- Infeed table: 2 M (6'6"), adjustable table plates for vertical spindles. Machine with top driven feed rolls & power bed rolls, motorized overhead feed beam with dual speed for rise-and-fall, full Cardan feed drive with independent adjustment to feed rollers after top head; side pressure opposite right side head, spindle locks for axial adjustment. Manual bed lubrication -- Feed drive: 5 HP motor, variable feed speed from 23 - 96 FPM. -- Includes: (1) Light in sound enclosure, dust manifold to the first joint, set of maintenance tools, operator and spare part's manuals and (9) cutterheads: (3) 2" heads, (2) 4" heads, (2) 6" heads, (1) 9" head and (1) 9" 1st bottom head with reference engraver.

Bob Dykstra
800-374-5009 ext:378
Call

2001 Wadkin K-23  Moulder
$28,500

WADKIN K23 Moulder Feed Through 6-Head (B,R,L,T,T,B) with working capacity of 9-1/2" x 5" capacity. -- Head sequence: Bottom 10 HP, right & left 20 HP, top 15 HP, top 15 HP and bottom 15 HP motor. -- Spindle dia.: 1-13/16" at 6,000 RPM. Mechanical digital readouts on all head adjustments except 1st bottom head; digiset readouts for left and top spindles, top heads with MDR for chipbreakers and pressure elements. -- Infeed table: 2 M (6'6"), adjustable table plates for vertical spindles. Machine with top driven feed rolls & power bed rolls, motorized overhead feed beam with dual speed for rise-and-fall, full Cardan feed drive with independent adjustment to feed rollers after top head; side pressure opposite right side head, spindle locks for axial adjustment. Chrome Beds, Manual bed lubrication -- Feed drive: 5 HP motor, variable feed speed from 23 - 96 FPM. -- Includes: (1) Light in sound enclosure, set of maintenance tools, operator and spare part's manuals and assorted cutterheads.

Bob Dykstra
800-374-5009 ext:378
Call

Call for Price

Wadkin GD 220  Moulder
Call for Price

PRICE DROP Wadkin GD220 5-Head Moulder 8-58" x 4-3/4" Working Capacity 40 mm Spindles This machine is still under pwoer and available for inspection. It is ready to load.

Carolina Machinery Sales, Inc
704-288-1904
Call

1997 Wadkin GD-220/5  Moulder
$14,900

WADKIN GD 220/5 Moulder Feed Through;5-Head (B-R-L-T-B), working dimensions: 8-5/8" x 4-3/4" capacity. -- Head sequence: Bottom 7.5 HP, right 7.5 HP, left 7.5 HP, top 15 HP and bottom 10 HP motor. -- Spindle dia. 1-1/2" at 6,000 RPM. Mechanical digital readouts on spindle adjustments. -- Feed System: Variable feed speed 18 - 72 FPM with 4 HP feed motor. -- Equipped with: 2M (6'6") infeed table, manual bed lubrication, manuals and (1) set of cutter-heads.. -- Includes: (1) post sander.

Bob Dykstra
800-374-5009 ext:378
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved